# 1:1 printable plans **URL:** \ **Category:** Proton Packs\ **Created:** [November 17, 2020, 5:40am UTC](https://forum.gbfans.com/t/1-1-printable-plans/20445 "2020-11-17T05:40:38Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![adam\_lavery](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/a/e9bcb4/32.png) [@adam\_lavery](https://forum.gbfans.com/u/adam_lavery)\ **Post date:** [November 17, 2020, 5:40am UTC](https://forum.gbfans.com/t/1-1-printable-plans/20445/1 "2020-11-17T05:40:38Z")
hello all, i found these forums during my research into building a [proton pack](https://www.gbfans.com/wiki/equipment/proton-pack) prop and i found that a lot of people were asking about printable plans in full 1:1 scale. so as the first step in starting to work out where i want to go with my build i dove into adobe illustrator and used Stefan Ottos plans to scale up to 1:1 full size and export out as a PDF for print either on one piece of paper if the facilities are available, or on multiple sheets of A4 to be taped together. i think i am within 1mm of every dimension but if i have made any glaring errors, please let me know. if they are of use to anyone i have shared them below [https://drive.google.com/drive/folders/1bYKRR51QK5DFOqPkCmcOPXZ2yQ7j1jDF?usp=sharing](https://drive.google.com/drive/folders/1bYKRR51QK5DFOqPkCmcOPXZ2yQ7j1jDF?usp=sharing) ---
**Author:** ![Theoderic](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/e68b1a/32.png) [@Theoderic](https://forum.gbfans.com/u/Theoderic)\ **Post date:** [November 17, 2020, 8:21pm UTC](https://forum.gbfans.com/t/1-1-printable-plans/20445/2 "2020-11-17T20:21:45Z")
Wow - that’s great! 8) Thank’s for the setup, i’ll check it out tomorrow - i’m curious, if i’ll be able to print these somehow. :nicejobyoudid: ---
**Author:** ![adam\_lavery](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/a/e9bcb4/32.png) [@adam\_lavery](https://forum.gbfans.com/u/adam_lavery)\ **Post date:** [December 4, 2020, 2:36am UTC](https://forum.gbfans.com/t/1-1-printable-plans/20445/3 "2020-12-04T02:36:18Z")
i got mine printed (ordered online) it cost me about £14 for 2 full size sets on correct size paper so didn’t have to cut and tape together ---
**Author:** ![adam\_lavery](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/a/e9bcb4/32.png) [@adam\_lavery](https://forum.gbfans.com/u/adam_lavery)\ **Post date:** [December 4, 2020, 3:06am UTC](https://forum.gbfans.com/t/1-1-printable-plans/20445/4 "2020-12-04T03:06:32Z")
i should add that i re-did them to fit onto A1 size paper for ease… they have been re-uploaded ---
**Author:** ![Tommorris22](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/85f322/32.png) [@Tommorris22](https://forum.gbfans.com/u/Tommorris22)\ **Post date:** [December 4, 2020, 6:22am UTC](https://forum.gbfans.com/t/1-1-printable-plans/20445/5 "2020-12-04T06:22:45Z")
Keep in mind, Stefan’s plans are outdated and contain numerous inaccuracies- some small, some big. Just a heads up before you commit and are neck deep into the project. ---
**Author:** ![adam\_lavery](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/a/e9bcb4/32.png) [@adam\_lavery](https://forum.gbfans.com/u/adam_lavery)\ **Post date:** [December 4, 2020, 6:36am UTC](https://forum.gbfans.com/t/1-1-printable-plans/20445/6 "2020-12-04T06:36:05Z")
good to know tommoris22 i will bear that in mind… truth is as a first build i wasn’t going all out for super duper hero screen accurate. i could have gone for a kit but i thought i would challenge myself. i think i can achieve the level of quality and visuals i am after, but i am continuing research before i start chopping… i am currently deciding between XPS and wood or a mix of the 2 for my build. ---
**Author:** ![Allghostsmatter](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/a/edb3f5/32.png) [@Allghostsmatter](https://forum.gbfans.com/u/Allghostsmatter)\ **Post date:** [October 11, 2022, 11:55pm UTC](https://forum.gbfans.com/t/1-1-printable-plans/20445/7 "2022-10-11T23:55:15Z")
There’s nothing in the google drive now. It’s a dead link ---
**Author:** ![Keith520terrell](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/k/da6949/32.png) [@Keith520terrell](https://forum.gbfans.com/u/Keith520terrell)\ **Post date:** [October 12, 2022, 9:10pm UTC](https://forum.gbfans.com/t/1-1-printable-plans/20445/8 "2022-10-12T21:10:11Z")
Does anyone have a current link to download? It says it’s not there now ---
**Author:** ![Keith520terrell](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/k/da6949/32.png) [@Keith520terrell](https://forum.gbfans.com/u/Keith520terrell)\ **Post date:** [October 13, 2022, 8:00pm UTC](https://forum.gbfans.com/t/1-1-printable-plans/20445/9 "2022-10-13T20:00:21Z")
Is anyone willing to share these files with me? I’m curious to see the differences from the other plans on here