# 1st Scratch DOUBLE build FAST. Holy Moly this is a lot of work.

**URL:** <https://forum.gbfans.com/t/1st-scratch-double-build-fast-holy-moly-this-is-a-lot-of-work/3107>\
**Category:** Proton Packs\
**Created:** [September 7, 2016, 10:51pm UTC](https://forum.gbfans.com/t/1st-scratch-double-build-fast-holy-moly-this-is-a-lot-of-work/3107 "2016-09-07T22:51:34Z")\
**Posts on this page:** 20\
**Page:** 3

<div class="post-metadata">

**Author:** ![Guyver2877](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/g/d6d6ee/32.png) [@Guyver2877](https://forum.gbfans.com/u/Guyver2877)\
**Post date:** [October 15, 2016, 11:35pm UTC](https://forum.gbfans.com/t/1st-scratch-double-build-fast-holy-moly-this-is-a-lot-of-work/3107/41 "2016-10-15T23:35:43Z")

</div>

Looks amazing…makes me feel guilty about buying a shell

---

<div class="post-metadata">

**Author:** ![xyster101](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/x/e79b87/32.png) [@xyster101](https://forum.gbfans.com/u/xyster101)\
**Post date:** [October 16, 2016, 3:08am UTC](https://forum.gbfans.com/t/1st-scratch-double-build-fast-holy-moly-this-is-a-lot-of-work/3107/42 "2016-10-16T03:08:38Z")

</div>

Thanks for the warm comments. Needs to be done this weekend!

Attached the wires, hose, wire loom to the [cyclotron](https://www.gbfans.com/wiki/equipment/proton-pack/cyclotron). I put a screw through it careful to avoid hitting the wires.

[![image](https://discdn.gbfans.com/original/3X/b/9/b988e4c4e3ea483629be4098d6e3ba1b39b7afbd.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-15%2014.03.01_zpspjb9yyjd.jpg.html)

[![image](https://discdn.gbfans.com/original/3X/b/c/bc09cdbad0569990bed8c49de6e283a45a033a10.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-15%2014.08.24_zpsi1emavmw.jpg.html)

[![image](https://discdn.gbfans.com/original/3X/d/9/d9e8959adeecfaad04dd85b91be434f5f4e8e016.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-15%2014.16.40_zpsexi6wvoc.jpg.html)

I used these connectors so if I need to I can remove parts of the pack without taking everything apart. In hindsight I later realized I glued all the red and blue tubes in place so it really can’t come apart.

[![image](https://discdn.gbfans.com/original/3X/a/6/a6c296c64acd007df5463566c47ed11f91d187a1.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-15%2014.23.10_zpsdzodmqln.jpg.html)

Then it was on to the final bits of the gun. I made the ends for the barrel out of some plywood and pine. I did not take the time to coat it with wood glue as I need this done.

[![image](https://discdn.gbfans.com/original/3X/5/3/538889ef346665953376bec000be209e8148651a.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-15%2016.17.31_zpsqllfpbtr.jpg.html)

People talk about how hard it is to make grips, but I busted some out in about 30 minutes. I took a 2x4 and drilled a 1.25" hole all the way through. I was going to cut it in half, but it just broke apart as the wood was really thin.

[![image](https://discdn.gbfans.com/original/3X/8/1/811806524f7de62f57141a4459d31a2d88df4f45.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-15%2016.48.58_zpsi5ogtf3o.jpg.html)

Then I used a coping saw and cut the grips out by hand. Here it is before sanding. Took about 5 minutes to cut all these out. It really helped that I have a resin set for transferring measurements. U used the table saw to cut the bevel along side of the grips.

[![image](https://discdn.gbfans.com/original/3X/d/e/dedecd635fa2d7f4bf043c37666437337e02b44f.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-15%2017.07.10_zps0wuura8m.jpg.html)

Then off to the belt sander and then dremel sander to smooth it all out.

[![image](https://discdn.gbfans.com/original/3X/4/7/479d22e855dc5276e48d4f0d0560c26cfe08db32.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-15%2017.24.37_zpseyvljccy.jpg.html)

I could have spent another 30 minutes sanding, but honestly you don’t hold this thing for comfort, so I called it done. Drilled some holes (off center by accident) and used Epoxy and socket bolt to hold it in place.

[![image](https://discdn.gbfans.com/original/3X/2/4/24c9e27275dac54eb33bf25ef37db08eca2a42da.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-15%2018.00.33_zps3rztteys.jpg.html)

I put the [ribbon cable](https://www.gbfans.com/wiki/equipment/proton-pack/ribbon-cable) on this one same as the last one with one change. I stapled a dowel to the end of the cable and glued this into the hole on the [motherboard](https://www.gbfans.com/wiki/equipment/proton-pack/motherboard). It made a much better connection then my other pack.

[![image](https://discdn.gbfans.com/original/3X/8/d/8d3806dacab8e8c1548c9c719770a8abe48303cb.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-15%2018.22.44_zpskp3apngo.jpg.html)

Tossed some primer on the guns and satin paint. It is hard to see as they are sitting on black paint too.

[![image](https://discdn.gbfans.com/original/3X/e/e/ee7f4948ce9a4719069e45faeda29d240f62facf.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-15%2020.47.24_zps5j7accqj.jpg.html)

[![image](https://discdn.gbfans.com/original/3X/8/7/879af38ae3f1135cd258ef703b9dd0ffa1807466.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-15%2020.47.32_zps4mollqpr.jpg.html)

And the two packs on the dinning room table.

[![image](https://discdn.gbfans.com/original/3X/c/f/cfebdd53324fc54f9405a5229761850078ed3238.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-15%2020.56.58_zps4tfmkxbq.jpg.html)

---

<div class="post-metadata">

**Author:** ![xyster101](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/x/e79b87/32.png) [@xyster101](https://forum.gbfans.com/u/xyster101)\
**Post date:** [October 17, 2016, 2:40am UTC](https://forum.gbfans.com/t/1st-scratch-double-build-fast-holy-moly-this-is-a-lot-of-work/3107/43 "2016-10-17T02:40:31Z")

</div>

Today was gun day. I don’t have many photos as it was manly electrical and that is boring to watch but fun to do. Besides the 2 kits I bought ( blue charging lights and red [cyclotron](https://www.gbfans.com/wiki/equipment/proton-pack/cyclotron) light kits) I picked up a bunch of switches and LEDS to light the gun. All in all I have about $80 in electronics (for 2 packs and guns) which is way cheaper then the kit bought on GBfans, granted it isn’t all synced.

[![image](https://discdn.gbfans.com/original/3X/d/c/dc503ad143d1375d8e82de65e3f4bb6d40f4bd15.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-16%2014.19.14_zpsgh8zdai7.jpg.html)

Wires in the thrower!

[![image](https://discdn.gbfans.com/original/3X/c/8/c82e4eecaafbf6402a69727d8782a2066bba6e95.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-16%2020.03.46_zpsfsykx63m.jpg.html)

Overall I have a blinking blue, blinking yellow, red, and 2 bright blue and 1 bright white inside. There are switches too that will turn it all on. I had a flashing color changer for the end of the thrower, but it was 6v and I burned it on 12v by accident (three of the 4!). There goes $1.70

[![image](https://discdn.gbfans.com/original/3X/3/c/3c4a14a17086c3a862f334f0e51bef83679de478.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-16%2020.04.03_zpsi67hojkr.jpg.html)

This is from an old Xbox to be my aluminum heat sink.

[![image](https://discdn.gbfans.com/original/3X/0/9/096e5dbacec16078959c7e841b9b79905fa03830.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-16%2022.10.17_zpshftwgjqt.jpg.html)

Not [Proton pack](https://www.gbfans.com/wiki/equipment/proton-pack) reated, but a Halloween decoration I made. Two of these. One for in the house and the other for the street. They are 4 ft by 4ft.

[![image](https://discdn.gbfans.com/original/3X/8/5/855b3392d4a369d10d8ed9ba71c84bcc553c5aa6.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-16%2014.29.50_zpskzfmcutg.jpg.html)

[![image](https://discdn.gbfans.com/original/3X/0/6/06404f30a194a85c588517bbc91989f74dba707a.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-16%2018.12.54_zpslpmiziij.jpg.html)

Yes that is a grave yard I built. Those pillars are foam and there is 50’ of fence too.

---

<div class="post-metadata">

**Author:** ![xyster101](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/x/e79b87/32.png) [@xyster101](https://forum.gbfans.com/u/xyster101)\
**Post date:** [October 18, 2016, 1:33am UTC](https://forum.gbfans.com/t/1st-scratch-double-build-fast-holy-moly-this-is-a-lot-of-work/3107/44 "2016-10-18T01:33:10Z")

</div>

Another non-proton pack, but I am not starting a new thread for this. Made a leg connector out of some pine. Drilled a blank with a hole saw and spun it on the metal lathe.

[![image](https://discdn.gbfans.com/original/3X/1/f/1fb638b21fa6ade5e7a73ba4f04710faf74f30ec.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-17%2016.27.56_zpskz0tjyla.jpg.html)

Coat of woodglue/water mixture and then paint.

[![image](https://discdn.gbfans.com/original/3X/3/c/3c20d50393f8dc95363d4c53a2f6e9a2549631cc.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-17%2020.02.54_zpstxlo9e2m.jpg.html)

Finished up my wiring of the throwers tonight. One LED blew out so I needed to replace it. It was a 6 volt and the resistor I picked ended up getting power to the wrong side once everything was heat shrunk together. ☹

[![image](https://discdn.gbfans.com/original/3X/c/5/c5fb439ca5300385fb9304b9dfd31e20883dad30.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-17%2020.10.25_zps4n2qgmht.jpg.html)

[![image](https://discdn.gbfans.com/original/3X/3/5/355d0f9b169ddfbdc263fbc9f8f411b275e02091.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-17%2020.10.35_zpsijahkvm5.jpg.html)

[![image](https://discdn.gbfans.com/original/3X/b/c/bc83d1dd7a97374d5b2c1eab742ebc236f9ead95.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-17%2020.10.58_zpstea0s6qz.jpg.html)

Nails inside of washers for switches since this angle bit is solid wood.

[![image](https://discdn.gbfans.com/original/3X/3/7/37f89319f74c6c54a6522f3b07e5a9f7d6ce5d98.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-17%2020.11.13_zpsmldyixye.jpg.html)

---

<div class="post-metadata">

**Author:** ![xyster101](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/x/e79b87/32.png) [@xyster101](https://forum.gbfans.com/u/xyster101)\
**Post date:** [October 19, 2016, 2:15am UTC](https://forum.gbfans.com/t/1st-scratch-double-build-fast-holy-moly-this-is-a-lot-of-work/3107/45 "2016-10-19T02:15:01Z")

</div>

I found this clear tube at work. It was mixed in with some Dowels. Unfortunetly it is a little small so I made a spacer to allow it to fit inside the 1" PVC. I cut a short piece of PVC, used a coping saw to cut out about a 3/4" section, heated it with a heat gun and bent it around the clear tube. When it cooled off it kept the shape. A little epoxy later and it was installed.

[![image](http://i462.photobucket.com/albums/qq342/xyster101/Ghostbusters/2016-10-18%2020.01.48_zpsummybiop.jpg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-18%2020.01.48_zpsummybiop.jpg.html)

[![image](http://i462.photobucket.com/albums/qq342/xyster101/Ghostbusters/2016-10-18%2020.16.45_zps1ucp5qm2.jpg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-18%2020.16.45_zps1ucp5qm2.jpg.html)

---

<div class="post-metadata">

**Author:** ![xyster101](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/x/e79b87/32.png) [@xyster101](https://forum.gbfans.com/u/xyster101)\
**Post date:** [October 20, 2016, 2:52am UTC](https://forum.gbfans.com/t/1st-scratch-double-build-fast-holy-moly-this-is-a-lot-of-work/3107/46 "2016-10-20T02:52:47Z")

</div>

Time to make the plastic thing that goes inside the gun. It has been addressed on this forum and I was not able to find a good answer. Some people use a CD case, the side of one, but they are hard to cut. I took some plexi glass and used a saw to make these grooves.

[![image](http://www.gbfans.com/images/pb/xyster101/Ghostbusters\_2016-10-19 14.46.43\_zpss2xnaew5.jpg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-19%2014.46.43_zpss2xnaew5.jpg.html)

Then I cut and sanded it down to size so it fit inside the thrower over the rectangle.

[![image](http://www.gbfans.com/images/pb/xyster101/Ghostbusters\_2016-10-19 14.46.49\_zps7ac15947.jpg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-19%2014.46.49_zps7ac15947.jpg.html)

It was tricky to hold it in position while gluing it into place. I do not have real moving LEDS for it, just the light from inside the gun will illuminate it.

[![image](http://www.gbfans.com/images/pb/xyster101/Ghostbusters\_2016-10-19 15.27.23\_zps4nvqhh4y.jpg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-19%2015.27.23_zps4nvqhh4y.jpg.html)

[![image](http://www.gbfans.com/images/pb/xyster101/Ghostbusters\_2016-10-19 15.27.33\_zpsngg9fflj.jpg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-19%2015.27.33_zpsngg9fflj.jpg.html)

[![image](http://www.gbfans.com/images/pb/xyster101/Ghostbusters\_2016-10-19 22.34.32\_zps8ljjjhan.jpg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-19%2022.34.32_zps8ljjjhan.jpg.html)

[![image](http://www.gbfans.com/images/pb/xyster101/Ghostbusters\_2016-10-19 22.34.36\_zpsyhz5lnwq.jpg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-19%2022.34.36_zpsyhz5lnwq.jpg.html)

I finished the wiring on a pack tonight. I used a machine screw through the 5/8" [clear hose](https://www.gbfans.com/shop/clear-uniform-hose) and PVC handle to lock the hose to the thrower. I also put a nut on it, the pressure is enough to hold the loom in place also.

[![image](http://www.gbfans.com/images/pb/xyster101/Ghostbusters\_2016-10-19 21.19.22\_zpsbigctsx1.jpg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-19%2021.19.22_zpsbigctsx1.jpg.html)

Then I had a few more solder connections to make and the electronics work great! I custom wired up each LED with a resistor to switches and the pack. So flip the switch and it all turns on from the thrower. Not as spiffy as the light/sound kit sold here, but only $40 for everything.

[![image](http://www.gbfans.com/images/pb/xyster101/Ghostbusters\_2016-10-19 21.19.13\_zps47usqvwl.jpg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-19%2021.19.13_zps47usqvwl.jpg.html)

[![image](http://www.gbfans.com/images/pb/xyster101/Ghostbusters\_2016-10-19 21.19.17\_zpspaeqtlas.jpg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-19%2021.19.17_zpspaeqtlas.jpg.html)

---

<div class="post-metadata">

**Author:** ![PssdffJay](https://forum.gbfans.com/user_avatar/forum.gbfans.com/pssdffjay/32/6529_2.png) [@PssdffJay](https://forum.gbfans.com/u/PssdffJay)\
**Post date:** [October 20, 2016, 4:43am UTC](https://forum.gbfans.com/t/1st-scratch-double-build-fast-holy-moly-this-is-a-lot-of-work/3107/47 "2016-10-20T04:43:41Z")

</div>

Nice work. That part is called the [bar graph](https://www.gbfans.com/wiki/equipment/proton-pack/bar-graph). If you have a piece of yellow clear plastic, put that behind the bar graph you made and it will glow yellow like it did in the movie.

---

<div class="post-metadata">

**Author:** ![Venkmans\_Swagger](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/v/6bbea6/32.png) [@Venkmans\_Swagger](https://forum.gbfans.com/u/Venkmans_Swagger)\
**Post date:** [October 20, 2016, 9:32am UTC](https://forum.gbfans.com/t/1st-scratch-double-build-fast-holy-moly-this-is-a-lot-of-work/3107/48 "2016-10-20T09:32:15Z")

</div>

Very clever bargraph. Nicely done

---

<div class="post-metadata">

**Author:** ![xyster101](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/x/e79b87/32.png) [@xyster101](https://forum.gbfans.com/u/xyster101)\
**Post date:** [October 23, 2016, 9:23pm UTC](https://forum.gbfans.com/t/1st-scratch-double-build-fast-holy-moly-this-is-a-lot-of-work/3107/49 "2016-10-23T21:23:51Z")

</div>

I had some trouble with the Shock mount. I tried this brass plumbing fitting I had laying around.

[![image](https://discdn.gbfans.com/original/3X/2/0/20fce080e6a5d8ce3e7e2fa0e4c2163621af1bfe.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-22%2010.12.42_zpsp8kxioak.jpg.html)

That ended up being a poor size. As the bolts I had were either too long or too short. So I went with the route that everyone does with washers and foam bits. I took a metal pipe and sharpened the end. Banged it with a hammer to punch out the foam washers.

[![image](https://discdn.gbfans.com/original/3X/d/3/d33a468e46f4242018bacb1ece83fcfbeefc106c.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-22%2009.41.43_zpsyxaq2wei.jpg.html)

I put a piece of plastic pipe on the carrage bolt as it was not as thick as my fender washers and the washers kept moving around. Look in the tutorial section to see what others used. I used 1.25" washers.

[![image](https://discdn.gbfans.com/original/3X/c/1/c17c1e6a662691867912e166d83f940aa9e75a53.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-22%2010.01.43_zpsnn1dgd4j.jpg.html)

Then I drilled a hole in the [bumper](https://www.gbfans.com/wiki/equipment/proton-pack/bumper) and put a nut on the back of it. I put a little black paint on the shock to weather it.

---

<div class="post-metadata">

**Author:** ![xyster101](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/x/e79b87/32.png) [@xyster101](https://forum.gbfans.com/u/xyster101)\
**Post date:** [October 23, 2016, 9:31pm UTC](https://forum.gbfans.com/t/1st-scratch-double-build-fast-holy-moly-this-is-a-lot-of-work/3107/50 "2016-10-23T21:31:50Z")

</div>

**\*\*Holy cow! We are done with the packs!!! \*\*** They weigh in at 21lbs each, not too bad (but there is no sound in them).

Weathering:

Took some extra spray paint, sprayed it into the cap and then used a brush to wipe on black, brown, silver in a few key spots. As others have said, if it looks good, STOP. Best to work the brown into cracks and then wipe it off immediatly with a paper towel. Leaves a little paint in the crack but not the surface.

[![image](https://discdn.gbfans.com/original/3X/d/e/dec8b52fc24b09a6ac70dd1e418c9f375495b653.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/5pack1_zps3eolzm6s.jpg.html)

The [crank knob](https://www.gbfans.com/shop/crank-knob) broke off during the party. I have to glue it back on.

[![image](https://discdn.gbfans.com/original/3X/9/4/94f3d43d6fadfdefbdac90c568d28c21056ee5dd.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/DSC_8357_zpsk8yxv2em.jpg.html)

[![image](https://discdn.gbfans.com/original/3X/b/a/baf9b961417aef3cbd6fd037c65232f77890b250.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/5pack3_zpsm7yawbdk.jpg.html)

[![image](https://discdn.gbfans.com/original/3X/b/a/bad4f6a437b555ceaed56f7325d7b70002eb03dd.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/5pack2_zpsucljopzh.jpg.html)

[![image](https://discdn.gbfans.com/original/3X/c/9/c98cf470ba21ed84a8b5cf1224244b1ee1fe9d3a.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/DSC_8356_zpstzqtqzxb.jpg.html)

Yes my wife did make costumes for the two dogs. [Slimer](https://www.gbfans.com/wiki/characters/slimer) is 11 years old and blind. Stay Puft was not a fan of his costume and froze for 20 minutes the first time and would not move.

[![image](https://discdn.gbfans.com/original/3X/f/7/f7aee682ade2e4543641e0c76438270bed816f3b.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/4shooting_zpslk1gpcdg.jpg.html)

[![image](https://discdn.gbfans.com/original/3X/5/2/52952cb6effc408e3d266d523a007b12b60578c7.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/4packs_zpszisnlbg2.jpg.html)

We also had a huge party with 40 people at our small house. I set up a “selfie station” in front of the logo I painted. A friend showed up like this, it was great!

[![image](https://discdn.gbfans.com/original/3X/8/e/8e252f25c1b3d11d1fa93aead5bf66c68b43628b.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/03maxian_zpsuxervhgi.jpg.html)

Wife and I did not take pictures as we were hosting. It is a bear walking around with these packs as they stick way out there.

[![image](https://discdn.gbfans.com/original/3X/1/a/1a67a81132935d624e6a66e330b032d696a561a6.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/03MaxChrista_zps5mlfhpqw.jpg.html)

---

<div class="post-metadata">

**Author:** ![Venkmans\_Swagger](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/v/6bbea6/32.png) [@Venkmans\_Swagger](https://forum.gbfans.com/u/Venkmans_Swagger)\
**Post date:** [October 24, 2016, 9:03am UTC](https://forum.gbfans.com/t/1st-scratch-double-build-fast-holy-moly-this-is-a-lot-of-work/3107/51 "2016-10-24T09:03:39Z")

</div>

Awesome pics and I’m glad the party went off

---

<div class="post-metadata">

**Author:** ![xyster101](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/x/e79b87/32.png) [@xyster101](https://forum.gbfans.com/u/xyster101)\
**Post date:** [October 27, 2016, 11:59pm UTC](https://forum.gbfans.com/t/1st-scratch-double-build-fast-holy-moly-this-is-a-lot-of-work/3107/52 "2016-10-27T23:59:20Z")

</div>

Thanks. This is probably going to be the last update on the packs as I am satisfied with them and done! I added the red hose and connectors to the thrower. As I used a piece of clear pipe I found laying around, it was not true movie size. So I had to find something that worked. Came up with these threaded PVC caps that fit on. Sanded off the threads (top one) and then cut it into a small ring.

[![image](https://discdn.gbfans.com/original/3X/7/0/70099daa72625738ca0e6322f76e0c6254498c4a.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-25%2019.15.10_zpsnykddie8.jpg.html)

Here is the resin one I had on the left and the ones I am making on the right. I attached a shaped piece of wood with some Apoxy and let that set.

[![image](https://discdn.gbfans.com/original/3X/6/f/6fd70647ccc5c39aa0e6e28c34fa5f5363edbfdb.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-26%2019.13.20_zpsyd1yohnt.jpg.html)

Once dry I hit it with some paint. Then drilled a hole all the way through it and put a #6 bolt through the fitting into the clear barrel where I used a small nut to hold it. This way the assembly is meachanically attached together. Fitting, wood piece, pipe, clear tube are all bolted together. The fitting is a long nut used to hold threaded rod together.

[![image](https://discdn.gbfans.com/original/3X/a/5/a5bdc94ebdf12d482710080a43692c0a395e8a7c.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-27%2017.45.50_zpsj0dyxsak.jpg.html)

I was given some red 1/4" tubing from the plumbers at work when they replaced a sink. It was stiff and I was able to just thread it inside the fitting. I then hit the tube with some heat so it would stay bent in that shape.

[![image](https://discdn.gbfans.com/original/3X/c/d/cdf68fafa697fbd78563b84ca81468aee90b4ec6.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-27%2018.03.10_zps7v4vvgdy.jpg.html)

[![image](https://discdn.gbfans.com/original/3X/3/1/31c586e84387f51466cce395ca46523e003668ba.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-27%2018.03.15_zpso6382mzo.jpg.html)

Finally on to the money shots. Packs are done. They were a huge hit at the party we had. I was going to edit my first post to update my parts, but I no longer can.

For a first build ever, I think it came out ok. Not 100% movie accurate, but doing this put into perspective the additional time and money that would be needed for a more accurate one. Plus people don’t notice accuracy as long as it is close. If I was to do it again I would go a little faster, make it a little messier and not try for movie accuracy as much (as people outside this group would never know).

**Specs:**

21 lbs

1/2" plywood mother board

ALICE frame

8 LEDS wired from scratch in thrower

LiPo battery 2100Mah 11.7 volts

80% accurate to the movie (opinion)

125+ hours between the two packs (Aug 26-Oct. 27) not counting hours on this site.

**\*\*Price \*\*** for 2 packs: $50 battery (had them), $80moving light kits, $30 for gun lights, $30 wire loom/Apoxy, $15 plywood, $15 press board, $10 styrene sign, $20 paint, $10 cake pans, $50 hot glue/gorilla/wood/Epoxy/Bondo, $80 ALICE frames, $60 Resin parts, $20 PVC (all pipe was used and free), $20 sticker sheets (I bought metallic).

$490 but that is probably closer to $400 as I had a lot of this stuff laying around (pipe, glues, batteries, wood). But Holy ■■■■ that is a lot of money over 2 months.

Everything was home made on the left pack (White out for Clippards, wire loom for resistors, Wood for thrower, [V-Hook](https://www.gbfans.com/wiki/equipment/proton-pack/v-hook)). The right one one has a resin thrower body, track, clippards, and resistors. I personally like the left one even though the gun is reversed as it is all home made.

[![image](https://discdn.gbfans.com/original/3X/a/3/a3d7d222b8093683494a0680ce18f3f6b385ed2b.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-27%2018.47.50_zpsckwx0x3p.jpg.html)

[![image](https://discdn.gbfans.com/original/3X/e/1/e106910715ffb14e0d59710200ad759608218a2f.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-27%2018.48.05_zpsh6pxhrby.jpg.html)

[![image](https://discdn.gbfans.com/original/3X/4/f/4f3a5f42ddc9bbc406f0aa5a6cb37b5eedf7a4dd.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-27%2018.48.20_zpsrx8dz4xu.jpg.html)

[![image](https://discdn.gbfans.com/original/3X/e/c/ecfe59d46a19c36d4d481509da87e36b6bf2206d.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-27%2018.48.27_zpsugcpxhl5.jpg.html)

[![image](https://discdn.gbfans.com/original/3X/4/b/4b7c0899a6eef158e419bfd208d3b524e4edd2b6.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-27%2018.48.44_zpshwa7b8s0.jpg.html)

[![image](https://discdn.gbfans.com/original/3X/5/f/5fb75901a40d4708b3891c434d3ac5814d8ffeae.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-27%2018.49.11_zpsav68k8k5.jpg.html)

[![image](https://discdn.gbfans.com/original/3X/f/a/fa6bcd7af5dbfaec22da5811f4a6e2dc124ba608.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-27%2018.49.34_zpshntmgdbb.jpg.html)

[![image](https://discdn.gbfans.com/original/3X/8/7/87153a960c2f20c4fb92c93c8e1eabc1917e9023.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-27%2018.49.53_zps57jtx8kx.jpg.html)

[![image](https://discdn.gbfans.com/original/3X/0/f/0fa151bb90280356aba8da0381b3fd6d2fa20e99.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-27%2018.50.09_zpst5izemqt.jpg.html)

[![image](https://discdn.gbfans.com/original/3X/7/d/7d83a9d31e71f30093c8499ddda9bac060201839.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-27%2018.50.29_zpsqf3hpvan.jpg.html)

[![image](https://discdn.gbfans.com/original/3X/4/6/46a58d150bedbb137c0d13a390196fd3fbdf6972.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-27%2018.51.00_zpsbciqalbw.jpg.html)

[![image](https://discdn.gbfans.com/original/3X/8/d/8df25cb91577eb2ae01af1c3b49c5e90b9ae1417.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-27%2018.51.22_zpsqclz8ewn.jpg.html)

[![image](https://discdn.gbfans.com/original/3X/b/4/b4bc21cbc83b16c7cbb78579e126c9558456181e.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-27%2018.51.11_zpslippevay.jpg.html)

[![image](https://discdn.gbfans.com/original/3X/1/d/1dcafc3baddeef5edbc6195c1f5b36015144e529.jpeg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-27%2018.51.44_zps4kupsbqy.jpg.html)

Thanks to all who chimed in. I will visit here to see how others are doing. Please let me know if I should change anything and your thoughts on this.

.

---

<div class="post-metadata">

**Author:** ![xyster101](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/x/e79b87/32.png) [@xyster101](https://forum.gbfans.com/u/xyster101)\
**Post date:** [November 1, 2016, 1:38am UTC](https://forum.gbfans.com/t/1st-scratch-double-build-fast-holy-moly-this-is-a-lot-of-work/3107/53 "2016-11-01T01:38:38Z")

</div>

Being a Ghostbuster is awesome! Over the past weekend a lot has happened with these costumes I put together.

First a friend borrowed them and took 1st place at his firm’s party.

[![image](http://www.gbfans.com/images/pb/xyster101/Ghostbusters\_2016-10-28 18.09.06\_zpssmvephl0.jpg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-28%2018.09.06_zpssmvephl0.jpg.html)

Then I visited my parents and my dad wore it. We took best duo and won $50.

[![image](http://www.gbfans.com/images/pb/xyster101/Ghostbusters\_2016-10-29 16.23.49\_zpsjp6xvhmx.jpg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-29%2016.23.49_zpsjp6xvhmx.jpg.html)

[![image](http://www.gbfans.com/images/pb/xyster101/Ghostbusters\_2016-10-29 16.24.23\_zpschqy2pbs.jpg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-29%2016.24.23_zpschqy2pbs.jpg.html)

I am a middle school technology teacher and wore it all day at work. The principal took a picture and tweeted it out to everyone in the district. During class I would set the pack on a work table and have the kids try to find the random bits like pencils, washers, cake pan, bottle tops, white out, PVC pipes, nails, and other bits on it. Just teaching them how to be creative.

[![image](http://www.gbfans.com/images/pb/xyster101/Ghostbusters\_2016-10-31 18.56.56\_zpstn7q9cyu.png)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-10-31%2018.56.56_zpstn7q9cyu.png.html)

Then I wandered around downtown with kids trick or treating and got a great response from all the kids and adults. People just did not believe that I made it.

---

<div class="post-metadata">

**Author:** ![ocp\_model-001](https://forum.gbfans.com/user_avatar/forum.gbfans.com/ocp_model-001/32/188358_2.png) [@ocp\_model-001](https://forum.gbfans.com/u/ocp_model-001)\
**Post date:** [November 1, 2016, 8:39pm UTC](https://forum.gbfans.com/t/1st-scratch-double-build-fast-holy-moly-this-is-a-lot-of-work/3107/54 "2016-11-01T20:39:19Z")

</div>

Awesome work man, respect! 😃

---

<div class="post-metadata">

**Author:** ![dartdemon340](https://forum.gbfans.com/user_avatar/forum.gbfans.com/dartdemon340/32/183438_2.png) [@dartdemon340](https://forum.gbfans.com/u/dartdemon340)\
**Post date:** [November 1, 2016, 9:35pm UTC](https://forum.gbfans.com/t/1st-scratch-double-build-fast-holy-moly-this-is-a-lot-of-work/3107/55 "2016-11-01T21:35:56Z")

</div>

Well done sir. It’s a nice feeling knowing you put countless hours of effort into scratch building everything and you get lots of praise. I won many contest thus far with mine. Few people were leery when I took first. Nope didnt buy it, 3 months of sweat blood and tears it took me and broke out photo album of build. Worth every minute too. How much did it end up weighing?

---

<div class="post-metadata">

**Author:** ![xyster101](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/x/e79b87/32.png) [@xyster101](https://forum.gbfans.com/u/xyster101)\
**Post date:** [November 1, 2016, 10:34pm UTC](https://forum.gbfans.com/t/1st-scratch-double-build-fast-holy-moly-this-is-a-lot-of-work/3107/56 "2016-11-01T22:34:30Z")

</div>

Weighs in at 21 pounds

Thanks for the kind words. People are amazed that I did build it. Seems weird as it was not super hard or frustrating. Just long hours of gluing and fitting things. Only a few minor setbacks.

---

<div class="post-metadata">

**Author:** ![dartdemon340](https://forum.gbfans.com/user_avatar/forum.gbfans.com/dartdemon340/32/183438_2.png) [@dartdemon340](https://forum.gbfans.com/u/dartdemon340)\
**Post date:** [November 1, 2016, 10:59pm UTC](https://forum.gbfans.com/t/1st-scratch-double-build-fast-holy-moly-this-is-a-lot-of-work/3107/57 "2016-11-01T22:59:20Z")

</div>

Nope it’s not all that hard just takes time and being unique for your build doesn’t look like it rolled off an assembly line. Mine needs Jenny Craig something fierce but 35 lbs isn’t bad once you get used to it. What’s a little spinal compression. But again well done. Now get started on a trap good sir! Those are easy peasy.

---

<div class="post-metadata">

**Author:** ![xyster101](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/x/e79b87/32.png) [@xyster101](https://forum.gbfans.com/u/xyster101)\
**Post date:** [November 12, 2016, 3:49pm UTC](https://forum.gbfans.com/t/1st-scratch-double-build-fast-holy-moly-this-is-a-lot-of-work/3107/58 "2016-11-12T15:49:37Z")

</div>

Now that Halloween is over, what does one do with these things? They are big, hard to move around and kind of delicate. I took people’s advice on here and fashioned a hanger with a Tornado hook from the HD for $4. Not the most glorious thing, but it works for now.

[![image](http://i462.photobucket.com/albums/qq342/xyster101/Ghostbusters/2016-11-12%2009.42.46_zpsmsmotlrq.jpg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-11-12%2009.42.46_zpsmsmotlrq.jpg.html)

[![image](http://i462.photobucket.com/albums/qq342/xyster101/Ghostbusters/2016-11-12%2009.43.58_zpsxwtqmuey.jpg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-11-12%2009.43.58_zpsxwtqmuey.jpg.html)

[![image](http://i462.photobucket.com/albums/qq342/xyster101/Ghostbusters/2016-11-12%2009.44.04_zpsf7z8tw9c.jpg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2016-11-12%2009.44.04_zpsf7z8tw9c.jpg.html)

---

<div class="post-metadata">

**Author:** ![xyster101](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/x/e79b87/32.png) [@xyster101](https://forum.gbfans.com/u/xyster101)\
**Post date:** [March 20, 2017, 1:28am UTC](https://forum.gbfans.com/t/1st-scratch-double-build-fast-holy-moly-this-is-a-lot-of-work/3107/59 "2017-03-20T01:28:30Z")

</div>

So I spent some time and put together a video. I am not good at editing and this was my first video using Hit Film Express instead of movie maker. Seems I can make a video and add Proton Streams if I want to really learn the program.

**Anyway, a video showing the packs in action and a tour of them.**

[https://youtu.be/eQ5pFfn0E\_A](https://youtu.be/eQ5pFfn0E_A)

Thanks

---

<div class="post-metadata">

**Author:** ![xyster101](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/x/e79b87/32.png) [@xyster101](https://forum.gbfans.com/u/xyster101)\
**Post date:** [May 22, 2017, 9:01pm UTC](https://forum.gbfans.com/t/1st-scratch-double-build-fast-holy-moly-this-is-a-lot-of-work/3107/60 "2017-05-22T21:01:32Z")

</div>

I am an middle school teacher and I wanted to display one of my packs at work but did not want the kids to be able to touch it. I decided to build a case for it.

First make some plans for the display case:

[![image](http://www.gbfans.com/images/pb/xyster101/Ghostbusters\_2017-05-07 20.19.23\_zpsks6sq0yc.jpg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2017-05-07%2020.19.23_zpsks6sq0yc.jpg.html)

Then it was to cutting the wood parts.

[![image](http://www.gbfans.com/images/pb/xyster101/Ghostbusters\_2017-04-12 10.17.17\_zps6gvnqflj.jpg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2017-04-12%2010.17.17_zps6gvnqflj.jpg.html)

I used pocket screws to hold it all together. I put Acrylic panels in the wood bought from Home Depot. What a pain this was to make.

[![image](http://www.gbfans.com/images/pb/xyster101/Ghostbusters\_2017-05-13 13.30.45\_zpsaiaxh2ph.jpg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2017-05-13%2013.30.45_zpsaiaxh2ph.jpg.html)

I screwed some cleats to the wall and used a hurricane hook to hold the pack.

[![image](http://www.gbfans.com/images/pb/xyster101/Ghostbusters\_2017-05-22 14.59.14\_zpsmqowsnrn.jpg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2017-05-22%2014.59.14_zpsmqowsnrn.jpg.html)

[![image](http://www.gbfans.com/images/pb/xyster101/Ghostbusters\_2017-05-22 15.06.48\_zpsmemrr6it.jpg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2017-05-22%2015.06.48_zpsmemrr6it.jpg.html)

[![image](http://www.gbfans.com/images/pb/xyster101/Ghostbusters\_2017-05-22 15.26.27\_zpsxqyk3hx5.jpg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2017-05-22%2015.26.27_zpsxqyk3hx5.jpg.html)

I also installed a button that when pressed will run the pack lights for 3 minutes. This way the kids can see it lit up but it will only run for a little while.

[![image](http://www.gbfans.com/images/pb/xyster101/Ghostbusters\_2017-05-22 15.26.44\_zpsowrf2gvb.jpg)](http://s462.photobucket.com/user/xyster101/media/Ghostbusters/2017-05-22%2015.26.44_zpsowrf2gvb.jpg.html)

[Previous page](https://forum.gbfans.com/t/1st-scratch-double-build-fast-holy-moly-this-is-a-lot-of-work/3107.md?page=2)

[Next page](https://forum.gbfans.com/t/1st-scratch-double-build-fast-holy-moly-this-is-a-lot-of-work/3107.md?page=4)
