# 3D Printed Trap Kit **URL:** \ **Category:** For Sale\ **Created:** [April 14, 2016, 5:22am UTC](https://forum.gbfans.com/t/3d-printed-trap-kit/30220 "2016-04-14T05:22:03Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![echo419](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/77aa72/32.png) [@echo419](https://forum.gbfans.com/u/echo419)\ **Post date:** [April 14, 2016, 5:22am UTC](https://forum.gbfans.com/t/3d-printed-trap-kit/30220/1 "2016-04-14T05:22:03Z")
![image](https://discdn.gbfans.com/original/3X/b/4/b43ecc088ad6afa29c1ef8e5a180d258055fb04e.jpeg) **Available again as of November 2017.** I have for sale 3d printed ghost trap Kit from Countspatula’s 3d files. These kits include all the plastic parts to build the trap, NO screws or other hardware included. Countspatula sales the hardware. All parts printed using black and silver PLA plastic at 200 microns. Ship US and Canada only. Feel free to ask any questions, I can take orders for parts too. Trap kit $100 plus shipping **For more info on this 3D printed trap see this [thread](http://www.gbfans.com/forum/viewtopic.php?f=3&t=41004).** I start printing these when I receive payment, can take up to 2 weeks to ship, usually faster. Thanks Jason Sanders Riverside, CA, USA **\*\*PSA: The aluminum side plates sold by GBFans here do NOT fit this trap, the holes don’t line up. Understand that 3D printed parts are not smooth like injection molded plastic parts, they are built in layers. So there will be ridges on all sides, in this case the ridges are a 1/5 of a millimeter.** Building Tips: **After building two traps I learned a few things, its best to drill out the holes where the bolts need to slide through instead of forcing them through. Get threading taps for where the bolts need to screw into, makes it much easier and less likely to split the plastic parts. Also if the bolt bottoms out inside the part, it could split it. So get the right length bolts.\*\*** ![image](https://discdn.gbfans.com/original/3X/3/0/30cf0d4834f93c9bb259b6025f56a33372d61c8b.jpeg) ![image](https://discdn.gbfans.com/original/3X/c/3/c3c452b5bc4af36ef0e3c9129da277d063bfc3ff.jpeg) ![image](https://discdn.gbfans.com/original/3X/d/f/dfb1e06f090916988e15ee0ccf4e2acfd482152f.jpeg) ---
**Author:** ![mcreed](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/m/3ab097/32.png) [@mcreed](https://forum.gbfans.com/u/mcreed)\ **Post date:** [April 14, 2016, 10:21am UTC](https://forum.gbfans.com/t/3d-printed-trap-kit/30220/2 "2016-04-14T10:21:37Z")
PMd ---
**Author:** ![echo419](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/77aa72/32.png) [@echo419](https://forum.gbfans.com/u/echo419)\ **Post date:** [April 15, 2016, 4:45am UTC](https://forum.gbfans.com/t/3d-printed-trap-kit/30220/3 "2016-04-15T04:45:14Z")
one sold ---
**Author:** ![Rodimus](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/r/a698b9/32.png) [@Rodimus](https://forum.gbfans.com/u/Rodimus)\ **Post date:** [April 17, 2016, 5:02pm UTC](https://forum.gbfans.com/t/3d-printed-trap-kit/30220/4 "2016-04-17T17:02:30Z")
Dang just missed ---
**Author:** ![echo419](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/77aa72/32.png) [@echo419](https://forum.gbfans.com/u/echo419)\ **Post date:** [April 19, 2016, 3:29pm UTC](https://forum.gbfans.com/t/3d-printed-trap-kit/30220/5 "2016-04-19T15:29:47Z")
another one being printed, can ship next week. ---
**Author:** ![westies14](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/w/13edae/32.png) [@westies14](https://forum.gbfans.com/u/westies14)\ **Post date:** [April 19, 2016, 3:55pm UTC](https://forum.gbfans.com/t/3d-printed-trap-kit/30220/6 "2016-04-19T15:55:15Z")
Is it possible that your electronics components (gears etc) could be printed separately and installed in another trap? The chain drive really gets the doors to snap open! ---
**Author:** ![echo419](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/77aa72/32.png) [@echo419](https://forum.gbfans.com/u/echo419)\ **Post date:** [April 19, 2016, 4:28pm UTC](https://forum.gbfans.com/t/3d-printed-trap-kit/30220/7 "2016-04-19T16:28:02Z")
I’m not the person to designed this trap, thats Countspatula. You’ll have to ask him about the electronics. He said you can get the sprockets and chain from [servocity.com](http://servocity.com) ---
**Author:** ![the0x](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/ebca7d/32.png) [@the0x](https://forum.gbfans.com/u/the0x)\ **Post date:** [May 24, 2016, 5:46am UTC](https://forum.gbfans.com/t/3d-printed-trap-kit/30220/8 "2016-05-24T05:46:19Z")
are these the delux or standard models ---
**Author:** ![echo419](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/77aa72/32.png) [@echo419](https://forum.gbfans.com/u/echo419)\ **Post date:** [May 24, 2016, 2:35pm UTC](https://forum.gbfans.com/t/3d-printed-trap-kit/30220/9 "2016-05-24T14:35:52Z")
This is the standard trap, which comes with the 3d printed side plates which aren’t in the pics above. thanks Jason ---
**Author:** ![J2Metal](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/j/e9a140/32.png) [@J2Metal](https://forum.gbfans.com/u/J2Metal)\ **Post date:** [June 20, 2016, 11:47pm UTC](https://forum.gbfans.com/t/3d-printed-trap-kit/30220/10 "2016-06-20T23:47:55Z")
Is this kit still available for sale? ---
**Author:** ![echo419](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/77aa72/32.png) [@echo419](https://forum.gbfans.com/u/echo419)\ **Post date:** [June 21, 2016, 12:16am UTC](https://forum.gbfans.com/t/3d-printed-trap-kit/30220/11 "2016-06-21T00:16:43Z")
PM sent ---
**Author:** ![Cythusly](https://forum.gbfans.com/user_avatar/forum.gbfans.com/cythusly/32/188_2.png) [@Cythusly](https://forum.gbfans.com/u/Cythusly)\ **Post date:** [July 25, 2016, 6:22pm UTC](https://forum.gbfans.com/t/3d-printed-trap-kit/30220/12 "2016-07-25T18:22:58Z")
Hey, I’m interested in a kit if/when you get another one printed. Thanks! -Tyler ---
**Author:** ![Krieger](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/k/59ef9b/32.png) [@Krieger](https://forum.gbfans.com/u/Krieger)\ **Post date:** [July 26, 2016, 11:01pm UTC](https://forum.gbfans.com/t/3d-printed-trap-kit/30220/13 "2016-07-26T23:01:45Z")
Interested in a trap kit if available ---
**Author:** ![echo419](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/77aa72/32.png) [@echo419](https://forum.gbfans.com/u/echo419)\ **Post date:** [July 27, 2016, 12:09am UTC](https://forum.gbfans.com/t/3d-printed-trap-kit/30220/14 "2016-07-27T00:09:43Z")
PM sent to both of you ---
**Author:** ![Krieger](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/k/59ef9b/32.png) [@Krieger](https://forum.gbfans.com/u/Krieger)\ **Post date:** [July 27, 2016, 1:39pm UTC](https://forum.gbfans.com/t/3d-printed-trap-kit/30220/15 "2016-07-27T13:39:39Z")
thanks - payment sent! ---
**Author:** ![Krieger](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/k/59ef9b/32.png) [@Krieger](https://forum.gbfans.com/u/Krieger)\ **Post date:** [August 16, 2016, 6:34pm UTC](https://forum.gbfans.com/t/3d-printed-trap-kit/30220/16 "2016-08-16T18:34:10Z")
Jason, Thanks again for the trap kit - very clean on some parts, like glass! Will get this one started after this heat wave breaks, got here quicker that I planned to work on it 🙂 Peter ---
**Author:** ![UpperAtmosphere](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/u/d9b06d/32.png) [@UpperAtmosphere](https://forum.gbfans.com/u/UpperAtmosphere)\ **Post date:** [September 5, 2016, 7:02pm UTC](https://forum.gbfans.com/t/3d-printed-trap-kit/30220/17 "2016-09-05T19:02:02Z")
Any more of these available? ---
**Author:** ![echo419](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/77aa72/32.png) [@echo419](https://forum.gbfans.com/u/echo419)\ **Post date:** [September 5, 2016, 11:46pm UTC](https://forum.gbfans.com/t/3d-printed-trap-kit/30220/18 "2016-09-05T23:46:39Z")
Pm sent. ---
**Author:** ![scigro](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/s/a88e57/32.png) [@scigro](https://forum.gbfans.com/u/scigro)\ **Post date:** [September 10, 2016, 1:07am UTC](https://forum.gbfans.com/t/3d-printed-trap-kit/30220/19 "2016-09-10T01:07:55Z")
how about the CAL resistor the side cylinders and the knob ? ---
**Author:** ![echo419](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/77aa72/32.png) [@echo419](https://forum.gbfans.com/u/echo419)\ **Post date:** [September 10, 2016, 5:51am UTC](https://forum.gbfans.com/t/3d-printed-trap-kit/30220/20 "2016-09-10T05:51:18Z")
I print everything for the trap, the pictures don’t show everything though. [Next page](https://forum.gbfans.com/t/3d-printed-trap-kit/30220.md?page=2)