# 64 herse/ambulace headliner

**URL:** <https://forum.gbfans.com/t/64-herse-ambulace-headliner/26262>\
**Category:** Ectomobiles\
**Created:** [September 20, 2013, 2:16pm UTC](https://forum.gbfans.com/t/64-herse-ambulace-headliner/26262 "2013-09-20T14:16:21Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![nitro\_6009](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/n/ba9def/32.png) [@nitro\_6009](https://forum.gbfans.com/u/nitro_6009)\
**Post date:** [September 20, 2013, 2:16pm UTC](https://forum.gbfans.com/t/64-herse-ambulace-headliner/26262/1 "2013-09-20T14:16:21Z")

</div>

After putting in all the lights and rack on this 64 the headliner looks like something from a slasher film .I sewed it up what could with fishing line but still looks bad is there anyone here who has replaced their headliner with lauan board and moleskin or other materials and if so could you walk me through the process.

Thank you much Darren

---

<div class="post-metadata">

**Author:** ![Boomerjinks](https://forum.gbfans.com/user_avatar/forum.gbfans.com/boomerjinks/32/128_2.png) [@Boomerjinks](https://forum.gbfans.com/u/Boomerjinks)\
**Post date:** [September 20, 2013, 7:45pm UTC](https://forum.gbfans.com/t/64-herse-ambulace-headliner/26262/2 "2013-09-20T19:45:39Z")

</div>

Sounds like it’s werse for were.

---

<div class="post-metadata">

**Author:** ![DefenderDarko](https://forum.gbfans.com/user_avatar/forum.gbfans.com/defenderdarko/32/6506_2.png) [@DefenderDarko](https://forum.gbfans.com/u/DefenderDarko)\
**Post date:** [September 20, 2013, 11:46pm UTC](https://forum.gbfans.com/t/64-herse-ambulace-headliner/26262/3 "2013-09-20T23:46:49Z")

</div>

Did you cut through the headliner to mount everything instead of removing it first?

---

<div class="post-metadata">

**Author:** ![nitro\_6009](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/n/ba9def/32.png) [@nitro\_6009](https://forum.gbfans.com/u/nitro_6009)\
**Post date:** [September 21, 2013, 4:43am UTC](https://forum.gbfans.com/t/64-herse-ambulace-headliner/26262/4 "2013-09-21T04:43:54Z")

</div>

Yes I did not remove it I just drilled and cut where I needed to get at bolts and wires.

---

<div class="post-metadata">

**Author:** ![DefenderDarko](https://forum.gbfans.com/user_avatar/forum.gbfans.com/defenderdarko/32/6506_2.png) [@DefenderDarko](https://forum.gbfans.com/u/DefenderDarko)\
**Post date:** [September 21, 2013, 4:50am UTC](https://forum.gbfans.com/t/64-herse-ambulace-headliner/26262/5 "2013-09-21T04:50:21Z")

</div>

I guess you could try to track another one down or line the ceiling if you destroyed it that badly.

My headliner in my Jeep was falling down from age. I just tore the fabric off, sanded the shell clean, and then sprayed it black with several coats of plastidip and spraypaint to give it a sort of black rhino-lined texture. It’s done well since then…

Other than that, I’m not sure what to tell you. I think you already know it either needs replacing or the roof needs coating. Or maybe just leave it bare metal? assuming it’s not Fiberglass…
