# Alternatives to using conventional split loom **URL:** \ **Category:** Proton Packs\ **Created:** [April 13, 2023, 1:26am UTC](https://forum.gbfans.com/t/alternatives-to-using-conventional-split-loom/4681 "2023-04-13T01:26:31Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![KingTorg](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/k/53a042/32.png) [@KingTorg](https://forum.gbfans.com/u/KingTorg)\ **Post date:** [April 13, 2023, 1:26am UTC](https://forum.gbfans.com/t/alternatives-to-using-conventional-split-loom/4681/1 "2023-04-13T01:26:31Z")
I’ve been considering using a different kind of tubing or material for the connector hose that runs from the pack to the neutrona wand. Most automotive-type loom is pretty stiff and tends to get in the way, especially when trying to go through doors, etc. I was trying to do some research on what other hoses or materials might make for good-looking and good-functioning substitutes, ideally something more supple/flexible and maybe with a little heft to it so that it hangs more naturally when holstered. I’m not concerned about movie accuracy. I just want to consider some fun options for customization. For the experienced pack builders out there, has anyone experimented with other materials and have feedback or photos on the results? Thanks! ---
**Author:** ![prodestrian](https://forum.gbfans.com/user_avatar/forum.gbfans.com/prodestrian/32/186836_2.png) [@prodestrian](https://forum.gbfans.com/u/prodestrian)\ **Post date:** [April 13, 2023, 5:20am UTC](https://forum.gbfans.com/t/alternatives-to-using-conventional-split-loom/4681/2 "2023-04-13T05:20:34Z")
I’ve been very happy with the [splitless loom](https://www.gbfans.com/shop/34-splitless-wire-loom) that gbfans offers, it feels more flexible than split loom and with just a few wires running through it there’s a definite weight to add realism. Never had a problem with it sticking out like split loom sometimes does. You also don’t get the annoying “plastic rubbing together” sound from splitloom. Closest thing I can compare it to is the grey output hose from a washing machine. ![image](https://discdn.gbfans.com/original/3X/d/5/d5f42620bba5b1b6716d3cd6386b4e6bb275286e.jpeg) ---
**Author:** ![KingTorg](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/k/53a042/32.png) [@KingTorg](https://forum.gbfans.com/u/KingTorg)\ **Post date:** [April 13, 2023, 2:55pm UTC](https://forum.gbfans.com/t/alternatives-to-using-conventional-split-loom/4681/3 "2023-04-13T14:55:54Z")
Thank you, Prod. I’ll have to take a look into it! ---
**Author:** ![Ectotainment](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/b19c9b/32.png) [@Ectotainment](https://forum.gbfans.com/u/Ectotainment)\ **Post date:** [April 13, 2023, 7:22pm UTC](https://forum.gbfans.com/t/alternatives-to-using-conventional-split-loom/4681/4 "2023-04-13T19:22:56Z")
I’m also very happy with the [splitless loom](https://www.gbfans.com/shop/34-splitless-wire-loom) from the GBFans store. To give mine some additional weight and stability, I added a silicone tube running through the inside of it and I absolutely love the way it feels. The silicone is super flexible compared to standard aquarium type tubing so it has more of a rope like feel to it than a stiff cable. ---
**Author:** ![KingTorg](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/k/53a042/32.png) [@KingTorg](https://forum.gbfans.com/u/KingTorg)\ **Post date:** [April 13, 2023, 7:36pm UTC](https://forum.gbfans.com/t/alternatives-to-using-conventional-split-loom/4681/5 "2023-04-13T19:36:13Z")
Thanks, Ecto. Where did you pick up the silicone tubing? Was it just from your local hardware store or did you have to source it from elsewhere? ---
**Author:** ![Ectotainment](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/b19c9b/32.png) [@Ectotainment](https://forum.gbfans.com/u/Ectotainment)\ **Post date:** [April 14, 2023, 12:16am UTC](https://forum.gbfans.com/t/alternatives-to-using-conventional-split-loom/4681/6 "2023-04-14T00:16:34Z")
I got it from Amazon, you’ll want 5/8" ID x 3/4" OD.