# Another noob-pack in progress (pic heavy)

**URL:** <https://forum.gbfans.com/t/another-noob-pack-in-progress-pic-heavy/2810>\
**Category:** Proton Packs\
**Created:** [September 10, 2007, 11:00pm UTC](https://forum.gbfans.com/t/another-noob-pack-in-progress-pic-heavy/2810 "2007-09-10T23:00:00Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![bigi71](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/b/bbce88/32.png) [@bigi71](https://forum.gbfans.com/u/bigi71)\
**Post date:** [September 10, 2007, 11:00pm UTC](https://forum.gbfans.com/t/another-noob-pack-in-progress-pic-heavy/2810/1 "2007-09-10T23:00:00Z")

</div>

Hello folks

First of all I have to thank everybody who is contributing the lots of information, plans and pictures to this site.

I´m scratchbuilding the whole pack (which is my first) out of styrene, and it´s a pleasure to work with this material. Can´t imagine better stuff for constructing something comlpex like the [proton pack](https://www.gbfans.com/wiki/equipment/proton-pack).

But enough said for now…I´ll go on and post some pics:

[V-Hook](https://www.gbfans.com/wiki/equipment/proton-pack/v-hook) built from steel and aluminum. It was hard for me to get the right shapes but when I look at the finished parts I can say that it was worth a few tries.

The metal assembly of the Ion-arm was also made by myself in the garage of my dad with pretty primitive tools but I think it came out very nice.

Hope you like the weathering. Maybe I went a little bit crazy with this…

Two beauty-shots of the crank-generator:

[Power cell](https://www.gbfans.com/wiki/equipment/proton-pack/power-cell) again:

These parts are also selfmade (except for the screws and red plastic rings on my [nycoil](https://www.gbfans.com/wiki/equipment/proton-pack/nycoil) replicas):

And a pic of all the bought greeblies etc:

the piece I´m now working on:

So I hope you like the first pics of my stuff. Please feel free to make comments.

As I make progress and new pictures I will keep updating this thread until the whole pack and thrower are finished.

Best regards from Germany

bfo

---

<div class="post-metadata">

**Author:** ![PeteVenkman\_Jedi](https://forum.gbfans.com/user_avatar/forum.gbfans.com/petevenkman_jedi/32/5868_2.png) [@PeteVenkman\_Jedi](https://forum.gbfans.com/u/PeteVenkman_Jedi)\
**Post date:** [September 10, 2007, 11:03pm UTC](https://forum.gbfans.com/t/another-noob-pack-in-progress-pic-heavy/2810/2 "2007-09-10T23:03:15Z")

</div>

Fantastic!! Another beautiful, clean, first time pack!! Great job so far. Welcome aboard.

---

<div class="post-metadata">

**Author:** ![bigi71](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/b/bbce88/32.png) [@bigi71](https://forum.gbfans.com/u/bigi71)\
**Post date:** [September 10, 2007, 11:22pm UTC](https://forum.gbfans.com/t/another-noob-pack-in-progress-pic-heavy/2810/3 "2007-09-10T23:22:35Z")

</div>

Thank you very much PVJ.

Really means a lot when you say this, because I carefully studied every single picture of your pack and it gave me the inspiration I needed for mine…and the final push to start this project.

I don´t know how often you already heard something like this, but its the truth 🙂

---

<div class="post-metadata">

**Author:** ![Andy\_2\_cool](https://forum.gbfans.com/user_avatar/forum.gbfans.com/andy_2_cool/32/5866_2.png) [@Andy\_2\_cool](https://forum.gbfans.com/u/Andy_2_cool)\
**Post date:** [September 10, 2007, 11:39pm UTC](https://forum.gbfans.com/t/another-noob-pack-in-progress-pic-heavy/2810/4 "2007-09-10T23:39:40Z")

</div>

:shock: super crisp !Awesome work !

---

<div class="post-metadata">

**Author:** ![CAZAFANTASMA](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/c/a6a055/32.png) [@CAZAFANTASMA](https://forum.gbfans.com/u/CAZAFANTASMA)\
**Post date:** [September 11, 2007, 12:26am UTC](https://forum.gbfans.com/t/another-noob-pack-in-progress-pic-heavy/2810/5 "2007-09-11T00:26:57Z")

</div>

I love the [ion arm](https://www.gbfans.com/shop/aluminum-welded-ion-arm), [power cell](https://www.gbfans.com/wiki/equipment/proton-pack/power-cell) and your gun mount!!! Looks awsome all together!!!

Sal.

---

<div class="post-metadata">

**Author:** ![frankfish01](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/f/ea5d25/32.png) [@frankfish01](https://forum.gbfans.com/u/frankfish01)\
**Post date:** [September 11, 2007, 12:42am UTC](https://forum.gbfans.com/t/another-noob-pack-in-progress-pic-heavy/2810/6 "2007-09-11T00:42:39Z")

</div>

So when are you gonna come clean and tell us that this is actually your 20th pack…BECAUSE IT DOESN’T LOOK LIKE IT WAS MADE BY A “NOOB” !!! :shock: :shock: :shock: so nice, man!

---

<div class="post-metadata">

**Author:** ![bradboss12](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/b/a88e4f/32.png) [@bradboss12](https://forum.gbfans.com/u/bradboss12)\
**Post date:** [September 11, 2007, 2:23am UTC](https://forum.gbfans.com/t/another-noob-pack-in-progress-pic-heavy/2810/7 "2007-09-11T02:23:53Z")

</div>

You have taken your first step into larger world. Nice work–keep us posted!

---

<div class="post-metadata">

**Author:** ![Shockwave](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/s/8e7dd6/32.png) [@Shockwave](https://forum.gbfans.com/u/Shockwave)\
**Post date:** [September 11, 2007, 4:01am UTC](https://forum.gbfans.com/t/another-noob-pack-in-progress-pic-heavy/2810/8 "2007-09-11T04:01:07Z")

</div>

wow nice.

I’m glad I decided to start using styrene in the future instead of MDF…

---

<div class="post-metadata">

**Author:** ![madmannc](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/m/a9a28c/32.png) [@madmannc](https://forum.gbfans.com/u/madmannc)\
**Post date:** [September 11, 2007, 12:10pm UTC](https://forum.gbfans.com/t/another-noob-pack-in-progress-pic-heavy/2810/9 "2007-09-11T12:10:43Z")

</div>

you make mine look like crap… ☹

---

<div class="post-metadata">

**Author:** ![keoni](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/k/a4c791/32.png) [@keoni](https://forum.gbfans.com/u/keoni)\
**Post date:** [September 11, 2007, 2:13pm UTC](https://forum.gbfans.com/t/another-noob-pack-in-progress-pic-heavy/2810/10 "2007-09-11T14:13:02Z")

</div>

great job man. further proof that any one can hammer out a kick ass pack whether its the first one of not. again, great job

---

<div class="post-metadata">

**Author:** ![footree](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/f/e36b37/32.png) [@footree](https://forum.gbfans.com/u/footree)\
**Post date:** [September 11, 2007, 2:38pm UTC](https://forum.gbfans.com/t/another-noob-pack-in-progress-pic-heavy/2810/11 "2007-09-11T14:38:56Z")

</div>

Where is a good place to pick up styrene? i’m about to build my first accurate pack (if all goes well that is).

---

<div class="post-metadata">

**Author:** ![Luke\_R](https://forum.gbfans.com/user_avatar/forum.gbfans.com/luke_r/32/5911_2.png) [@Luke\_R](https://forum.gbfans.com/u/Luke_R)\
**Post date:** [September 11, 2007, 5:28pm UTC](https://forum.gbfans.com/t/another-noob-pack-in-progress-pic-heavy/2810/12 "2007-09-11T17:28:01Z")

</div>

Thats flawlessly put together.

Inspiring to see both yours and DooMs both constructed in styrene looking so sharp.

Damn fine work.

---

<div class="post-metadata">

**Author:** ![Spare](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/s/41988e/32.png) [@Spare](https://forum.gbfans.com/u/Spare)\
**Post date:** [September 11, 2007, 6:06pm UTC](https://forum.gbfans.com/t/another-noob-pack-in-progress-pic-heavy/2810/13 "2007-09-11T18:06:18Z")

</div>

All I can say is WOW, this looks awesome.

I just started my first pack and I can say after seeing your items I am reconsidering using Styrene for parts of the pack.

Looking great so far, good job

---

<div class="post-metadata">

**Author:** ![bigi71](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/b/bbce88/32.png) [@bigi71](https://forum.gbfans.com/u/bigi71)\
**Post date:** [September 11, 2007, 6:43pm UTC](https://forum.gbfans.com/t/another-noob-pack-in-progress-pic-heavy/2810/14 "2007-09-11T18:43:34Z")

</div>

Thanks so much for all your positive feedback. It´s really cool and motivating to read this from you guys. I´m doing my best to maintain the clean look all over the pack.

Today I´ve cut the Booster-tube to size and now im working on the Booster-Frame again. I´ll post a pic of the finished frame tomorrow.

@footree: Just look out for local plastic suppliers (maybe the yellow pages could help). If you can´t find anything this way go to your local hobby shop and buy it there (this is probably not going to be cheap). Another option is to order it online.

---

<div class="post-metadata">

**Author:** ![frankfish01](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/f/ea5d25/32.png) [@frankfish01](https://forum.gbfans.com/u/frankfish01)\
**Post date:** [September 11, 2007, 8:09pm UTC](https://forum.gbfans.com/t/another-noob-pack-in-progress-pic-heavy/2810/15 "2007-09-11T20:09:35Z")

</div>

where do you get the “brick” looking plastic in the rib portion of the [booster frame](https://www.gbfans.com/wiki/equipment/proton-pack/booster-frame)?

---

<div class="post-metadata">

**Author:** ![DooM1977](https://forum.gbfans.com/user_avatar/forum.gbfans.com/doom1977/32/178_2.png) [@DooM1977](https://forum.gbfans.com/u/DooM1977)\
**Post date:** [September 11, 2007, 9:51pm UTC](https://forum.gbfans.com/t/another-noob-pack-in-progress-pic-heavy/2810/16 "2007-09-11T21:51:33Z")

</div>

Incredible job!! I’ll have to seriously raise my game if I want to have something remotely as good looking as your pack!! I’m glad to see that I’m not the only one who got inspired by PVJ’s wonderful job.

Keep us posted on your progress.. I may have to ask you some pointers in the future.

Take care!

---

<div class="post-metadata">

**Author:** ![Zack](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/z/f6c823/32.png) [@Zack](https://forum.gbfans.com/u/Zack)\
**Post date:** [September 11, 2007, 10:27pm UTC](https://forum.gbfans.com/t/another-noob-pack-in-progress-pic-heavy/2810/17 "2007-09-11T22:27:17Z")

</div>

If by noob, you mean **N** o **O** ther **O** nes **B** etter! :lol: awesome work. Truly inspiring! 🙂 Reminds me to get it in gear…

-Zack

---

<div class="post-metadata">

**Author:** ![UltimateGBfan](https://forum.gbfans.com/user_avatar/forum.gbfans.com/ultimategbfan/32/5863_2.png) [@UltimateGBfan](https://forum.gbfans.com/u/UltimateGBfan)\
**Post date:** [September 12, 2007, 12:49am UTC](https://forum.gbfans.com/t/another-noob-pack-in-progress-pic-heavy/2810/18 "2007-09-12T00:49:04Z")

</div>

Looks great man!

Just a quick question,how easy is it to work with styrene and how well does it hold up?

---

<div class="post-metadata">

**Author:** ![bigi71](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/b/bbce88/32.png) [@bigi71](https://forum.gbfans.com/u/bigi71)\
**Post date:** [September 12, 2007, 1:05am UTC](https://forum.gbfans.com/t/another-noob-pack-in-progress-pic-heavy/2810/19 "2007-09-12T01:05:44Z")

</div>

Humble thanks for your kind words. 🙂

As I said I´m putting loads of effort and time into this. And questions are always welcome of course.

@frankfish:

The bricks were ripped straigt out of the wall of Bahnhof Hintertupfingen. Here is the pic:

Ok to be serious:

This stuff are some remaining pieces from old model railroad buildings in 1:87 scale. I had the luck that my father was a huge model train freak when I was younger, so I found the pieces in a spare parts box in the loft.

I included the photo to show that it can be difficult to get the correct sized pattern because everything in the picture is (or should be) in the 1:87 standard scale. I hope this helps a little bit.

@UltimateGBfan:

Some parts are really difficult to make, of course the best example here is the [bumper](https://www.gbfans.com/wiki/equipment/proton-pack/bumper) which I will build when almost everything else on the pack is finished. Some others are totally easy ([Ion Arm](https://www.gbfans.com/shop/aluminum-welded-ion-arm), EDA box) so it depends on which part you are looking at 😉

Clearly the most important thing is that you take your time and plan everything carefully. It needs also an eye for detail when sanding small parts like the fins on the gearbox.

All in all I would say everything is doable if you have enough patience and are not totally unskilled with your hands.

---

<div class="post-metadata">

**Author:** ![UltimateGBfan](https://forum.gbfans.com/user_avatar/forum.gbfans.com/ultimategbfan/32/5863_2.png) [@UltimateGBfan](https://forum.gbfans.com/u/UltimateGBfan)\
**Post date:** [September 12, 2007, 1:26am UTC](https://forum.gbfans.com/t/another-noob-pack-in-progress-pic-heavy/2810/20 "2007-09-12T01:26:05Z")

</div>

Well that counts me out lol.

No I’m only kidding.I guess I should get some styrene from my hobby shop give it a go.Thanks for the advice.

[Next page](https://forum.gbfans.com/t/another-noob-pack-in-progress-pic-heavy/2810.md?page=2)
