# Any help would be helpful

**URL:** <https://forum.gbfans.com/t/any-help-would-be-helpful/219083>\
**Category:** Tutorials & Guides\
**Created:** [May 15, 2026, 9:07pm UTC](https://forum.gbfans.com/t/any-help-would-be-helpful/219083 "2026-05-15T21:07:15Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![beany302006](https://forum.gbfans.com/user_avatar/forum.gbfans.com/beany302006/32/130935_2.png) [@beany302006](https://forum.gbfans.com/u/beany302006)\
**Post date:** [May 15, 2026, 9:07pm UTC](https://forum.gbfans.com/t/any-help-would-be-helpful/219083/1 "2026-05-15T21:07:15Z")

</div>

Where can I find the micro toggle switch with the 2 pin jst connectors the wires on mine came off :sigh:

---

<div class="post-metadata">

**Author:** ![thatcrazysquidguy](https://forum.gbfans.com/user_avatar/forum.gbfans.com/thatcrazysquidguy/32/186191_2.png) [@thatcrazysquidguy](https://forum.gbfans.com/u/thatcrazysquidguy)\
**Post date:** [May 16, 2026, 12:52am UTC](https://forum.gbfans.com/t/any-help-would-be-helpful/219083/2 "2026-05-16T00:52:37Z")

</div>

Did the wires separate from the switch or the connector?

---

<div class="post-metadata">

**Author:** ![beany302006](https://forum.gbfans.com/user_avatar/forum.gbfans.com/beany302006/32/130935_2.png) [@beany302006](https://forum.gbfans.com/u/beany302006)\
**Post date:** [May 16, 2026, 10:36am UTC](https://forum.gbfans.com/t/any-help-would-be-helpful/219083/3 "2026-05-16T10:36:22Z")

</div>

The wires came off of the toggle switch

---

<div class="post-metadata">

**Author:** ![beany302006](https://forum.gbfans.com/user_avatar/forum.gbfans.com/beany302006/32/130935_2.png) [@beany302006](https://forum.gbfans.com/u/beany302006)\
**Post date:** [May 16, 2026, 10:38am UTC](https://forum.gbfans.com/t/any-help-would-be-helpful/219083/4 "2026-05-16T10:38:47Z")

</div>

I bought new micro toggle switches from Walmart and had to grind thown the connector to fit inside the pin holder

---

<div class="post-metadata">

**Author:** ![beany302006](https://forum.gbfans.com/user_avatar/forum.gbfans.com/beany302006/32/130935_2.png) [@beany302006](https://forum.gbfans.com/u/beany302006)\
**Post date:** [May 16, 2026, 10:43am UTC](https://forum.gbfans.com/t/any-help-would-be-helpful/219083/5 "2026-05-16T10:43:27Z")

</div>

:sigh: I bought new micro toggle switches from Walmart and had to grind down the connector to fit inside the pin holder

---

<div class="post-metadata">

**Author:** ![beany302006](https://forum.gbfans.com/user_avatar/forum.gbfans.com/beany302006/32/130935_2.png) [@beany302006](https://forum.gbfans.com/u/beany302006)\
**Post date:** [May 16, 2026, 10:50am UTC](https://forum.gbfans.com/t/any-help-would-be-helpful/219083/6 "2026-05-16T10:50:10Z")

</div>

I dont have a tabletop repair kit to solder the wires back on and I accidentally cut the connector off very close to the connector by accident

---

<div class="post-metadata">

**Author:** ![thatcrazysquidguy](https://forum.gbfans.com/user_avatar/forum.gbfans.com/thatcrazysquidguy/32/186191_2.png) [@thatcrazysquidguy](https://forum.gbfans.com/u/thatcrazysquidguy)\
**Post date:** [May 16, 2026, 7:00pm UTC](https://forum.gbfans.com/t/any-help-would-be-helpful/219083/7 "2026-05-16T19:00:22Z")

</div>

You can get some solder, a soldering iron, and some heat shrink tubing from Walmart. If there is any of the metal post left you should be able to solder the wire to it.