# Any Trap Holster Plans, pref GB1?

**URL:** <https://forum.gbfans.com/t/any-trap-holster-plans-pref-gb1/25717>\
**Category:** Ghost Traps\
**Created:** [September 23, 2025, 11:00am UTC](https://forum.gbfans.com/t/any-trap-holster-plans-pref-gb1/25717 "2025-09-23T11:00:50Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![galeap](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/g/dbc845/32.png) [@galeap](https://forum.gbfans.com/u/galeap)\
**Post date:** [September 23, 2025, 11:00am UTC](https://forum.gbfans.com/t/any-trap-holster-plans-pref-gb1/25717/1 "2025-09-23T11:00:50Z")

</div>

Hi All,

Its been a long time since I posted here, but recently I have become active again looking to finish off builds that have been on pause for years.

I’m about to finish off a composite aluminum, 3d printed scratch built GB1 trap and am looking for any plans that exist for the trap hoslter, prefereably for a GB1 holster. Does anyone know if these exist?

I found plans for a GB2 holster ([JairusWhitley.com](http://jairuswhitley.com/download.html)), but I dont know how much they differ in comparision to GB1 ones.

Any help on this is much appreciated.

P.

---

<div class="post-metadata">

**Author:** ![jtysonlambert](https://forum.gbfans.com/user_avatar/forum.gbfans.com/jtysonlambert/32/187369_2.png) [@jtysonlambert](https://forum.gbfans.com/u/jtysonlambert)\
**Post date:** [September 23, 2025, 11:34am UTC](https://forum.gbfans.com/t/any-trap-holster-plans-pref-gb1/25717/2 "2025-09-23T11:34:09Z")

</div>

I was in the same boat several months ago, and, after much research, decided there were no definitive plans or solid reference to extrapolate any accurate measurements for GB1 holsters.

Here’s where I asked in the Spengler’s 1984 Workbench group on Facebook. There’s also a link in the replies for a previous discussion thread on the subject.

> **[Facebook](https://www.facebook.com/groups/460627574616892/posts/829569534389359)**

---

<div class="post-metadata">

**Author:** ![galeap](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/g/dbc845/32.png) [@galeap](https://forum.gbfans.com/u/galeap)\
**Post date:** [September 23, 2025, 11:51am UTC](https://forum.gbfans.com/t/any-trap-holster-plans-pref-gb1/25717/3 "2025-09-23T11:51:07Z")

</div>

Thanks for the super-fast reply, and the FB link.

So, the GB1 trap holster details is one of the few remaining areas of total unknown from the original movie.

I’ve been searching the forum threads and googling away and have come up with nothing that clearly links back to the original prop. I was hoping one may have been through the Hollywood type auction houses by now but no joy on that investigative path either. And most of the 3D print model sites (Thingiverse etc) only seem to have ‘interpreted’ designs that my OCD would have some issues with 😊.

Will read through the FB discussion and continue the search.

Thanks again.

P.

---

<div class="post-metadata">

**Author:** ![galeap](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/g/dbc845/32.png) [@galeap](https://forum.gbfans.com/u/galeap)\
**Post date:** [September 24, 2025, 10:37am UTC](https://forum.gbfans.com/t/any-trap-holster-plans-pref-gb1/25717/4 "2025-09-24T10:37:15Z")

</div>

Read through the FB thread, which had the best level of discussion I have found so far about the trap holsters online.

It inspired me to go through the 4K version of the original movie and play spot the holster :)~ ,and after doing that I’m now in the camp of thinking the GB1 holster is only thick leather without a full aluminium backing.

I did notice that it doesnt seem to have the leather strap that wraps around the trap like on the GB2 ones. In a few scenes, you can see Ray has one hand on/near the trap as he is walking/jogging, which I am assume is to make sure it doesnt come off the [V-hook](https://www.gbfans.com/wiki/equipment/proton-pack/v-hook).

Anyway I will keep searching the web and share any new findings I stumble across.

---

<div class="post-metadata">

**Author:** ![tobycj](https://forum.gbfans.com/user_avatar/forum.gbfans.com/tobycj/32/186876_2.png) [@tobycj](https://forum.gbfans.com/u/tobycj)\
**Post date:** [September 25, 2025, 12:00am UTC](https://forum.gbfans.com/t/any-trap-holster-plans-pref-gb1/25717/5 "2025-09-25T00:00:03Z")

</div>

There were two different holsters, Ray’s and Venkman had one too. Very different shapes from each other. Neither had a strap, both appear to be thick leather with no aluminium backing, and used black rivets (?), and the [v-hooks](https://www.gbfans.com/wiki/equipment/proton-pack/v-hook) were painted black too.

---

<div class="post-metadata">

**Author:** ![prodestrian](https://forum.gbfans.com/user_avatar/forum.gbfans.com/prodestrian/32/186836_2.png) [@prodestrian](https://forum.gbfans.com/u/prodestrian)\
**Post date:** [September 25, 2025, 8:14am UTC](https://forum.gbfans.com/t/any-trap-holster-plans-pref-gb1/25717/6 "2025-09-25T08:14:49Z")

</div>

Has anyone managed to figure out what the stamped/embossed text on Venkman’s holster says?

 ![image](https://discdn.gbfans.com/original/3X/f/0/f0583b5a5d927ade9a08560c8e9cf4cf38ea0c37.jpeg)

 ![image](https://discdn.gbfans.com/original/3X/3/f/3ff0e1b98d3209fd3a80582cbcf38f9eee457bd4.jpeg)

 ![image](https://discdn.gbfans.com/original/3X/b/7/b7f898617270eb8f47fb0e5a0927eb550428d965.jpeg)

 ![image](https://discdn.gbfans.com/original/3X/d/a/da35408d4b8ed19b0cb00641835e350a344ee44e.jpeg)

 ![image](https://discdn.gbfans.com/original/3X/b/e/be7148467f046a3c3ab0181bc6d2d00445d3a80e.jpeg)

Personally I think the second line of text says PROTECTED but maybe someone else can see something different (posted inside Spoiler tag so my guess doesn’t influence anyone before they’ve looked at it).

Can’t tell what the top line says. Also can’t tell if there’s a shape/logo on the top-right side of the text (beneath the rivet) or if it’s just dirt or a crease in the leather.

And I’m not sure what the circular pattern behind the [V-hook](https://www.gbfans.com/wiki/equipment/proton-pack/v-hook) is, whether it’s another stamp or if they removed something (like a tape measure/hammer/wrench holder or a pistol quick release).

I’m also convinced that there’s no backing behind the leather, which would explain why the holster seems to bend backwards when there’s a trap hanging off it:

 ![image](https://discdn.gbfans.com/original/3X/9/9/99563ea0b501a334ec40e87f771244d861a9dd38.png)

Presumably the weight of the trap left it permanently bent out of shape:

 ![image](https://discdn.gbfans.com/original/3X/9/8/98934ae2edf690675a3e388d299d50958939ed9d.png)

I don’t think we ever see Venkman with a trap on his holster, and I don’t think we ever get any good closeups of Ray’s holster (not close enough to see if there’s any text). The clearest shots all seem to be publicity photos (and I can’t find any good high-res versions):

 ![image](https://discdn.gbfans.com/original/3X/5/d/5d7a90288b052525dba4d897a479c73c072734a3.png)

 ![image](https://discdn.gbfans.com/original/3X/2/1/2153b6b66b755ab02d2535683e8bfd64c39792f6.png)

---

<div class="post-metadata">

**Author:** ![galeap](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/g/dbc845/32.png) [@galeap](https://forum.gbfans.com/u/galeap)\
**Post date:** [September 25, 2025, 9:05am UTC](https://forum.gbfans.com/t/any-trap-holster-plans-pref-gb1/25717/7 "2025-09-25T09:05:26Z")

</div>

Hi prodestrian, thats some great content, thanks.

I’m of the same belief that they are both leather holsters, and I cant make out the embosed words, but I think there is an icon image of some sort near the words, plus there is some larger circular one under the [v-hook](https://www.gbfans.com/wiki/equipment/proton-pack/v-hook). I’m not as sure that the shapes of Rays is al that different to Peter’s, I think with the belt scrunched up in some of the shots it makes teh slots look longer than they are, plus I agree it looks like the leather has been stretched out of shape from the weight of the trap in the other shots.

I was just about to start a search for old tool holsters to see if I spot anything similar, maybe with text and rivets in the same spots. I was actually going to try an AI tool (GPT, Claude) to see if there is enough there for it to make a match.

Anyway, in my searching last night I found another trap holster discussion thread on Facebook that I wanted to share here to start grouping up info. Unfortunately nothing new specific about GB1 holsters, but does have a good image of a GB2 belt and holster. [https://www.facebook.com/share/p/17LBqmTy4R/](https://www.facebook.com/share/p/17LBqmTy4R/)

P.
