# Anyone ever made a pack shell using rigid  vinyl?

**URL:** <https://forum.gbfans.com/t/anyone-ever-made-a-pack-shell-using-rigid-vinyl/18159>\
**Category:** Proton Packs\
**Created:** [September 14, 2008, 2:32pm UTC](https://forum.gbfans.com/t/anyone-ever-made-a-pack-shell-using-rigid-vinyl/18159 "2008-09-14T14:32:09Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Coz\_UK](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/c/9fc348/32.png) [@Coz\_UK](https://forum.gbfans.com/u/Coz_UK)\
**Post date:** [September 14, 2008, 2:32pm UTC](https://forum.gbfans.com/t/anyone-ever-made-a-pack-shell-using-rigid-vinyl/18159/1 "2008-09-14T14:32:09Z")

</div>

Just a thought that crossed my mind…

I used to have a large, almost 1:6th scale '66 Batmobile made from thick vinyl - like a garage model kit.

Think it was maybe 3-4mm thick.

It was about the size of a pack, with some pretty good detail. Pretty sure it was not a officially endorsed!

It had an underside that was also detailed - it was all one piece & hollow. Fairly light too.

Pic - that’s a 12" Mego magnetic Batman for scale:

 ![image](https://discdn.gbfans.com/original/3X/7/1/7108c41fe475bbd891a9253de4d38c45fad7dce7.jpeg)

Interior pic to show deep molded detail:

 ![image](https://discdn.gbfans.com/original/3X/c/5/c5d440c85530afebdaedd6793b773d60bbe8903a.jpeg)

I wondered if this stuff would feasably make a good pack shell material? Could be molded with the ‘motherboard’ and shell complete. Even drill & screw into it, & use expanding foam inside. Be more resilient than resin, vacform & fiberglass. Maybe for semi-stunt / ‘walkaround’ packs for shows, etc.

How the heck ya cast that stuff, I dunno.

Coz.

---

<div class="post-metadata">

**Author:** ![Coover5](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/c/a4c791/32.png) [@Coover5](https://forum.gbfans.com/u/Coover5)\
**Post date:** [September 14, 2008, 3:00pm UTC](https://forum.gbfans.com/t/anyone-ever-made-a-pack-shell-using-rigid-vinyl/18159/2 "2008-09-14T15:00:54Z")

</div>

correct me if i’m wrong but weren’t mego figures 8" tall?

---

<div class="post-metadata">

**Author:** ![Coz\_UK](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/c/9fc348/32.png) [@Coz\_UK](https://forum.gbfans.com/u/Coz_UK)\
**Post date:** [September 14, 2008, 3:07pm UTC](https://forum.gbfans.com/t/anyone-ever-made-a-pack-shell-using-rigid-vinyl/18159/3 "2008-09-14T15:07:56Z")

</div>

Yeah, regular Megos were 8" - but they also produced 12" figures, but fewer of 'em.

C.
