# Anyone successfully taken apart the Spirit ecto goggles yet?

**URL:** <https://forum.gbfans.com/t/anyone-successfully-taken-apart-the-spirit-ecto-goggles-yet/15457>\
**Category:** Ecto Goggles\
**Created:** [September 2, 2018, 12:59am UTC](https://forum.gbfans.com/t/anyone-successfully-taken-apart-the-spirit-ecto-goggles-yet/15457 "2018-09-02T00:59:08Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![Necronaut](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/n/7c8e57/32.png) [@Necronaut](https://forum.gbfans.com/u/Necronaut)\
**Post date:** [September 2, 2018, 12:59am UTC](https://forum.gbfans.com/t/anyone-successfully-taken-apart-the-spirit-ecto-goggles-yet/15457/1 "2018-09-02T00:59:08Z")

</div>

While I’m pretty happy with these as is, I’d like to give it a once-over and give it a better looking paint treatment. I have removed the rivet looking parts from the side panels of the goggle by just pulling them out. I intend on replacing the hex bolts with real ones and replacing the bolts around the face mask area with big rivets.

I’m a little hesitant to simply pull things apart or off in case they become damaged. Any advice or help would be appreciated.

---

<div class="post-metadata">

**Author:** ![ghostengineer](https://forum.gbfans.com/user_avatar/forum.gbfans.com/ghostengineer/32/178888_2.png) [@ghostengineer](https://forum.gbfans.com/u/ghostengineer)\
**Post date:** [September 2, 2018, 8:18pm UTC](https://forum.gbfans.com/t/anyone-successfully-taken-apart-the-spirit-ecto-goggles-yet/15457/2 "2018-09-02T20:18:00Z")

</div>

I’m still waiting for mine to be delivered sadly. I do want to do some work to them like redo the side winged(for lack of better word) to make it a bit more accurate and the top of the goggles bother me being so flat so trying to figure out what to do with that. I may possibly leave them as is and just repaint them.

---

<div class="post-metadata">

**Author:** ![Veeb0rg](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/v/6a8cbe/32.png) [@Veeb0rg](https://forum.gbfans.com/u/Veeb0rg)\
**Post date:** [September 13, 2018, 3:53am UTC](https://forum.gbfans.com/t/anyone-successfully-taken-apart-the-spirit-ecto-goggles-yet/15457/3 "2018-09-13T03:53:11Z")

</div>

I got mine this afternoon. Haven’t had time to even take them out of the box yet.

---

<div class="post-metadata">

**Author:** ![Reppert7](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/r/9fc348/32.png) [@Reppert7](https://forum.gbfans.com/u/Reppert7)\
**Post date:** [September 29, 2018, 12:58am UTC](https://forum.gbfans.com/t/anyone-successfully-taken-apart-the-spirit-ecto-goggles-yet/15457/4 "2018-09-29T00:58:01Z")

</div>

that’s a good question, ill be waiting to see myself!

---

<div class="post-metadata">

**Author:** ![randomZERO](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/r/bcef8e/32.png) [@randomZERO](https://forum.gbfans.com/u/randomZERO)\
**Post date:** [September 29, 2018, 2:46am UTC](https://forum.gbfans.com/t/anyone-successfully-taken-apart-the-spirit-ecto-goggles-yet/15457/5 "2018-09-29T02:46:09Z")

</div>

I have them completely torn down. The eye pieces on the front were the worst. If I did it again I would use a heat gun to soften the glue. I used a butter knife around the bottoms to pop them off. Check my build thread.

---

<div class="post-metadata">

**Author:** ![hutto](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/h/f9ae1b/32.png) [@hutto](https://forum.gbfans.com/u/hutto)\
**Post date:** [September 29, 2018, 6:11pm UTC](https://forum.gbfans.com/t/anyone-successfully-taken-apart-the-spirit-ecto-goggles-yet/15457/6 "2018-09-29T18:11:28Z")

</div>

I bought these yesterday at a store. The other set had the left eye piece assembled wrong. The one I bought didn’t have any damned stickers!

Spirit has just shrugged at me. I don’t want to pay $12 for that set on eBay.

---

<div class="post-metadata">

**Author:** ![kingpin](https://forum.gbfans.com/user_avatar/forum.gbfans.com/kingpin/32/188026_2.png) [@kingpin](https://forum.gbfans.com/u/kingpin)\
**Post date:** [October 1, 2018, 4:24pm UTC](https://forum.gbfans.com/t/anyone-successfully-taken-apart-the-spirit-ecto-goggles-yet/15457/7 "2018-10-01T16:24:44Z")

</div>

There are some good photos of the Spirit Goggles in various stages of dismantle, here:

[Ghostbusters 2 Ecto Goggles from Spirit Halloween Goggles (3D Printed Upgrades)](https://www.gbfans.com/forum/viewtopic.php?f=12&t=44767)
