# Attaching motherboard to pack shell w/pics **URL:** \ **Category:** Tutorials & Guides\ **Created:** [May 16, 2009, 4:32am UTC](https://forum.gbfans.com/t/attaching-motherboard-to-pack-shell-w-pics/18650 "2009-05-16T04:32:44Z")\ **Posts on this page:** 20\ **Page:** 3
**Author:** ![GhostGuy](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/g/9fc29f/32.png) [@GhostGuy](https://forum.gbfans.com/u/GhostGuy)\ **Post date:** [August 12, 2009, 6:34pm UTC](https://forum.gbfans.com/t/attaching-motherboard-to-pack-shell-w-pics/18650/41 "2009-08-12T18:34:07Z")
Oh damn, is that how speed nuts work? I had a hardware guy suggest them to me when I was looking for a bracket, but I looked at them and couldn’t figure out how they were supposed to help. I thought they were just weird nuts that maybe were designed to lock into square slots. 🙂 ---
**Author:** ![tigerkhanLV](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/71e660/32.png) [@tigerkhanLV](https://forum.gbfans.com/u/tigerkhanLV)\ **Post date:** [August 14, 2009, 11:03am UTC](https://forum.gbfans.com/t/attaching-motherboard-to-pack-shell-w-pics/18650/42 "2009-08-14T11:03:44Z")
good tips, this will help me mount my shell on my [motherboard](https://www.gbfans.com/wiki/equipment/proton-pack/motherboard) soon. ---
**Author:** ![Adam\_Bestler](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/a/3d9bf3/32.png) [@Adam\_Bestler](https://forum.gbfans.com/u/Adam_Bestler)\ **Post date:** [August 17, 2009, 4:20pm UTC](https://forum.gbfans.com/t/attaching-motherboard-to-pack-shell-w-pics/18650/43 "2009-08-17T16:20:39Z")
Here’s a nice informative video. https://www.youtube.com/embed/p7wd2Lenmlo?feature=oembed&wmode=opaque It’s a good idea to show the process than to write it down. ---
**Author:** ![Chrisakamagic83](https://forum.gbfans.com/user_avatar/forum.gbfans.com/chrisakamagic83/32/5861_2.png) [@Chrisakamagic83](https://forum.gbfans.com/u/Chrisakamagic83)\ **Post date:** [August 27, 2009, 7:21pm UTC](https://forum.gbfans.com/t/attaching-motherboard-to-pack-shell-w-pics/18650/44 "2009-08-27T19:21:15Z")
Awesome. Thanks Kind. You have been most helpful with helping me “authentisize” my pack. 🆒 ---
**Author:** ![BSjohnson](https://forum.gbfans.com/user_avatar/forum.gbfans.com/bsjohnson/32/115_2.png) [@BSjohnson](https://forum.gbfans.com/u/BSjohnson)\ **Post date:** [September 22, 2009, 8:02pm UTC](https://forum.gbfans.com/t/attaching-motherboard-to-pack-shell-w-pics/18650/45 "2009-09-22T20:02:04Z")
> [@CPU64](#): > > Like mentioned, I also don’t trust the threads on aluminum brackets, they strip easily. > > This is what I use. > > They clip onto the bracket over the hole. Also available for sheet metal screws. CPU - could you specify which part number clip you use? And is it from [http://www.fastener-world.com.tw](http://www.fastener-world.com.tw) like the image url suggests? ---
**Author:** ![cpu64](https://forum.gbfans.com/user_avatar/forum.gbfans.com/cpu64/32/104792_2.png) [@cpu64](https://forum.gbfans.com/u/cpu64)\ **Post date:** [October 3, 2009, 4:44pm UTC](https://forum.gbfans.com/t/attaching-motherboard-to-pack-shell-w-pics/18650/46 "2009-10-03T16:44:00Z")
The ones I recommend are called U-Nuts > **[allproduct.com - The World's Best Products Directory for Volume Buyers](https://www.allproducts.com/404.html)** > > All Products Online is the most complete product directory for volume buyers to find suppliers, exporters and OEM manufacturers. Database contains over 70,000 products on computers, electronics, machinery, etc. Databases are published on CD-ROMs and... If you scroll down, you’ll see a link to U Clips which work as well. These types of nuts are mainly used in securing automotive body panels when assembling cars. You can find them at any hardware store or auto parts store like autozone or discount auto parts. Just make sure to look for the smaller sizes since most auto applications use size 6 or 8 bolts. Here’s another list with prices. [http://www.autobodysupplies.com/BodyBoltsNuts&ClipsPage1.htm](http://www.autobodysupplies.com/BodyBoltsNuts&ClipsPage1.htm) ---
**Author:** ![BSjohnson](https://forum.gbfans.com/user_avatar/forum.gbfans.com/bsjohnson/32/115_2.png) [@BSjohnson](https://forum.gbfans.com/u/BSjohnson)\ **Post date:** [October 3, 2009, 7:30pm UTC](https://forum.gbfans.com/t/attaching-motherboard-to-pack-shell-w-pics/18650/47 "2009-10-03T19:30:50Z")
Thanks a lot! I’ll look for some this weekend! ---
**Author:** ![xtrmn8r17](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/x/f0a364/32.png) [@xtrmn8r17](https://forum.gbfans.com/u/xtrmn8r17)\ **Post date:** [October 4, 2009, 6:27pm UTC](https://forum.gbfans.com/t/attaching-motherboard-to-pack-shell-w-pics/18650/48 "2009-10-04T18:27:52Z")
Thanks for this tutorial Vinny! I will be doing this daunting task tomorrow probably after ive sanded down my pack and all my resin parts. 🆒 ---
**Author:** ![Outer\_Arrowhead](https://forum.gbfans.com/user_avatar/forum.gbfans.com/outer_arrowhead/32/6094_2.png) [@Outer\_Arrowhead](https://forum.gbfans.com/u/Outer_Arrowhead)\ **Post date:** [October 12, 2009, 11:45pm UTC](https://forum.gbfans.com/t/attaching-motherboard-to-pack-shell-w-pics/18650/49 "2009-10-12T23:45:36Z")
what side should i rivet from? does it matter? using mmm board and rivets ---
**Author:** ![kind2311](https://forum.gbfans.com/user_avatar/forum.gbfans.com/kind2311/32/187468_2.png) [@kind2311](https://forum.gbfans.com/u/kind2311)\ **Post date:** [October 13, 2009, 12:18am UTC](https://forum.gbfans.com/t/attaching-motherboard-to-pack-shell-w-pics/18650/50 "2009-10-13T00:18:21Z")
rivet from the outside, so the ■■■■■■ faces outward. ---
**Author:** ![Outer\_Arrowhead](https://forum.gbfans.com/user_avatar/forum.gbfans.com/outer_arrowhead/32/6094_2.png) [@Outer\_Arrowhead](https://forum.gbfans.com/u/Outer_Arrowhead)\ **Post date:** [October 15, 2009, 11:26pm UTC](https://forum.gbfans.com/t/attaching-motherboard-to-pack-shell-w-pics/18650/51 "2009-10-15T23:26:51Z")
vant rivet if i cant get the holes drilled, i am having the damndest time getting just one drilled. any suggestions? I’ve clamped the bracket in place as well as used loctite a week in advance to get the brackets into position… is it possible the loctite is acting a lubricant, preventing my drill from going any further? ---
**Author:** ![Outer\_Arrowhead](https://forum.gbfans.com/user_avatar/forum.gbfans.com/outer_arrowhead/32/6094_2.png) [@Outer\_Arrowhead](https://forum.gbfans.com/u/Outer_Arrowhead)\ **Post date:** [October 15, 2009, 11:41pm UTC](https://forum.gbfans.com/t/attaching-motherboard-to-pack-shell-w-pics/18650/52 "2009-10-15T23:41:43Z")
OKAY! managed to send the bit flying from the drill as i was attempting to finish a hole. Got sparks and the whole shebang. I am at a loss, not sure how mangled i can let the back (exterior) of one bracket “area” become before i have to replace it. ---
**Author:** ![kind2311](https://forum.gbfans.com/user_avatar/forum.gbfans.com/kind2311/32/187468_2.png) [@kind2311](https://forum.gbfans.com/u/kind2311)\ **Post date:** [October 16, 2009, 12:37am UTC](https://forum.gbfans.com/t/attaching-motherboard-to-pack-shell-w-pics/18650/53 "2009-10-16T00:37:52Z")
sounds like your bit has had it. get a new one and try again. a good tip to drilling metal, keep your drill on the highest torque setting and keep it at full speed. apply pressure so the drill starts cutting, then let off slightly, apply pressure, let off. repeat that pattern until you have your clean hole drilled. ---
**Author:** ![irricanian](https://forum.gbfans.com/user_avatar/forum.gbfans.com/irricanian/32/5887_2.png) [@irricanian](https://forum.gbfans.com/u/irricanian)\ **Post date:** [October 16, 2009, 2:04am UTC](https://forum.gbfans.com/t/attaching-motherboard-to-pack-shell-w-pics/18650/54 "2009-10-16T02:04:24Z")
> [@Outer\_Arrowhead](#): > > OKAY! managed to send the bit flying from the drill as i was attempting to finish a hole. Got sparks and the whole shebang. > > I am at a loss, not sure how mangled i can let the back (exterior) of one bracket “area” become before i have to replace it. I sent you an email with some suggestions, a sharp bit should cut aluminum like a hot knife thru butter. Center punching is the key to successful drilling. ---
**Author:** ![Outer\_Arrowhead](https://forum.gbfans.com/user_avatar/forum.gbfans.com/outer_arrowhead/32/6094_2.png) [@Outer\_Arrowhead](https://forum.gbfans.com/u/Outer_Arrowhead)\ **Post date:** [October 16, 2009, 5:26am UTC](https://forum.gbfans.com/t/attaching-motherboard-to-pack-shell-w-pics/18650/55 "2009-10-16T05:26:48Z")
> [@kind2311](#): > > sounds like your bit has had it. > > get a new one and try again. a good tip to drilling metal, keep your drill on the highest torque setting and keep it at full speed. apply pressure so the drill starts cutting, then let off slightly, apply pressure, let off. > > repeat that pattern until you have your clean hole drilled. This thing WAS new, right off the shelf. ---
**Author:** ![kind2311](https://forum.gbfans.com/user_avatar/forum.gbfans.com/kind2311/32/187468_2.png) [@kind2311](https://forum.gbfans.com/u/kind2311)\ **Post date:** [October 16, 2009, 5:31am UTC](https://forum.gbfans.com/t/attaching-motherboard-to-pack-shell-w-pics/18650/56 "2009-10-16T05:31:50Z")
im sure it was, but you can ruin a new bit very quickly if youre not using it properly. if you’re using a cordless drill, it’s gotta have a full or near full charge in order to put out the proper amount of torque. ---
**Author:** ![Outer\_Arrowhead](https://forum.gbfans.com/user_avatar/forum.gbfans.com/outer_arrowhead/32/6094_2.png) [@Outer\_Arrowhead](https://forum.gbfans.com/u/Outer_Arrowhead)\ **Post date:** [October 16, 2009, 11:45pm UTC](https://forum.gbfans.com/t/attaching-motherboard-to-pack-shell-w-pics/18650/57 "2009-10-16T23:45:26Z")
> [@irricanian](#): > > > [@Outer\_Arrowhead](#): > > > > OKAY! managed to send the bit flying from the drill as i was attempting to finish a hole. Got sparks and the whole shebang. > > > > I am at a loss, not sure how mangled i can let the back (exterior) of one bracket “area” become before i have to replace it. > > I sent you an email with some suggestions, a sharp bit should cut aluminum like a hot knife thru butter. Center punching is the key to successful drilling. wont using a larger bit allow the rivets to slide around? ---
**Author:** ![irricanian](https://forum.gbfans.com/user_avatar/forum.gbfans.com/irricanian/32/5887_2.png) [@irricanian](https://forum.gbfans.com/u/irricanian)\ **Post date:** [October 16, 2009, 11:47pm UTC](https://forum.gbfans.com/t/attaching-motherboard-to-pack-shell-w-pics/18650/58 "2009-10-16T23:47:23Z")
> [@Outer\_Arrowhead](#): > > wont using a larger bit allow the rivets to slide around? No not if they are properly installed, the slightly larger hole will allow you some leeway should your holes be off slightly…room to adjust 😉 ---
**Author:** ![cpu64](https://forum.gbfans.com/user_avatar/forum.gbfans.com/cpu64/32/104792_2.png) [@cpu64](https://forum.gbfans.com/u/cpu64)\ **Post date:** [October 17, 2009, 12:36am UTC](https://forum.gbfans.com/t/attaching-motherboard-to-pack-shell-w-pics/18650/59 "2009-10-17T00:36:58Z")
And don’t go fast when drilling metals. Slow drilling keeps your bits from losing temper from high temps. Use some WD-40 also. ---
**Author:** ![Outer\_Arrowhead](https://forum.gbfans.com/user_avatar/forum.gbfans.com/outer_arrowhead/32/6094_2.png) [@Outer\_Arrowhead](https://forum.gbfans.com/u/Outer_Arrowhead)\ **Post date:** [October 17, 2009, 8:17am UTC](https://forum.gbfans.com/t/attaching-motherboard-to-pack-shell-w-pics/18650/60 "2009-10-17T08:17:14Z")
> [@CPU64](#): > > And don’t go fast when drilling metals. Slow drilling keeps your bits from losing temper from high temps. > > Use some WD-40 also. seriously? and when should that be applied? [Previous page](https://forum.gbfans.com/t/attaching-motherboard-to-pack-shell-w-pics/18650.md?page=2) [Next page](https://forum.gbfans.com/t/attaching-motherboard-to-pack-shell-w-pics/18650.md?page=4)