# attaching resin knobs

**URL:** <https://forum.gbfans.com/t/attaching-resin-knobs/33858>\
**Category:** Ghost Traps\
**Created:** [March 30, 2010, 12:27am UTC](https://forum.gbfans.com/t/attaching-resin-knobs/33858 "2010-03-30T00:27:44Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![don-69](https://forum.gbfans.com/user_avatar/forum.gbfans.com/don-69/32/5853_2.png) [@don-69](https://forum.gbfans.com/u/don-69)\
**Post date:** [March 30, 2010, 12:27am UTC](https://forum.gbfans.com/t/attaching-resin-knobs/33858/1 "2010-03-30T00:27:44Z")

</div>

hey guys what the best way to you’ve found to attach the resin trap knobs?

---

<div class="post-metadata">

**Author:** ![cpu64](https://forum.gbfans.com/user_avatar/forum.gbfans.com/cpu64/32/104792_2.png) [@cpu64](https://forum.gbfans.com/u/cpu64)\
**Post date:** [March 30, 2010, 1:02am UTC](https://forum.gbfans.com/t/attaching-resin-knobs/33858/2 "2010-03-30T01:02:06Z")

</div>

GOOP is always a winner. It practically glues everything.

---

<div class="post-metadata">

**Author:** ![don-69](https://forum.gbfans.com/user_avatar/forum.gbfans.com/don-69/32/5853_2.png) [@don-69](https://forum.gbfans.com/u/don-69)\
**Post date:** [March 30, 2010, 1:25am UTC](https://forum.gbfans.com/t/attaching-resin-knobs/33858/3 "2010-03-30T01:25:57Z")

</div>

i have some of that i,ll give it a try i just dont what them to get knock off very ez.. thanks

---

<div class="post-metadata">

**Author:** ![cpu64](https://forum.gbfans.com/user_avatar/forum.gbfans.com/cpu64/32/104792_2.png) [@cpu64](https://forum.gbfans.com/u/cpu64)\
**Post date:** [March 30, 2010, 1:27am UTC](https://forum.gbfans.com/t/attaching-resin-knobs/33858/4 "2010-03-30T01:27:35Z")

</div>

you can always use a reinforcement pin with the glue.

---

<div class="post-metadata">

**Author:** ![GB\_Ty](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/g/3da27b/32.png) [@GB\_Ty](https://forum.gbfans.com/u/GB_Ty)\
**Post date:** [March 30, 2010, 3:12am UTC](https://forum.gbfans.com/t/attaching-resin-knobs/33858/5 "2010-03-30T03:12:44Z")

</div>

Sand the surface you want to glue it to, then sand the resin piece. Use two part Epoxy and there you go.

---

<div class="post-metadata">

**Author:** ![ThrowingChicken](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/46a35a/32.png) [@ThrowingChicken](https://forum.gbfans.com/u/ThrowingChicken)\
**Post date:** [March 30, 2010, 3:15am UTC](https://forum.gbfans.com/t/attaching-resin-knobs/33858/6 "2010-03-30T03:15:37Z")

</div>

You could run a recessed screw in from the inside of the trap. If you want to go glue only, you could take the above suggestions a step further and drill little dimples onto the back side of the knob and the area on the trap you want to glue it to. Push the epoxy glue into the dimples then put the pieces together. When it hardens it will be like many tiny fingers holding the knob on.

---

<div class="post-metadata">

**Author:** ![irricanian](https://forum.gbfans.com/user_avatar/forum.gbfans.com/irricanian/32/5887_2.png) [@irricanian](https://forum.gbfans.com/u/irricanian)\
**Post date:** [March 30, 2010, 3:57am UTC](https://forum.gbfans.com/t/attaching-resin-knobs/33858/7 "2010-03-30T03:57:20Z")

</div>

Use set screws, drill and tap, screw into place. Forget the glue

---

<div class="post-metadata">

**Author:** ![spenglerfan](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/s/ea666f/32.png) [@spenglerfan](https://forum.gbfans.com/u/spenglerfan)\
**Post date:** [March 30, 2010, 7:05am UTC](https://forum.gbfans.com/t/attaching-resin-knobs/33858/8 "2010-03-30T07:05:07Z")

</div>

Tension Pins also work really well. They also allow you to turn the knob after its attached 🙂