# Attaching wire to the SMC straights/L-fittings

**URL:** <https://forum.gbfans.com/t/attaching-wire-to-the-smc-straights-l-fittings/35231>\
**Category:** Proton Packs\
**Created:** [September 19, 2009, 8:19pm UTC](https://forum.gbfans.com/t/attaching-wire-to-the-smc-straights-l-fittings/35231 "2009-09-19T20:19:11Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mudflaps](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/m/c57346/32.png) [@Mudflaps](https://forum.gbfans.com/u/Mudflaps)\
**Post date:** [September 19, 2009, 8:19pm UTC](https://forum.gbfans.com/t/attaching-wire-to-the-smc-straights-l-fittings/35231/1 "2009-09-19T20:19:11Z")

</div>

Okay, so the pack’s almost finished. I purchased the SMC straights and L-fittings (with the orange plastic tip) and the plastic wire I’m using is too big to connect.

Any tips (or pictures) to attach the wire to the SMC would be appreciated. Thanks!

---

<div class="post-metadata">

**Author:** ![Garvin\_Ghostbuster](https://forum.gbfans.com/user_avatar/forum.gbfans.com/garvin_ghostbuster/32/6039_2.png) [@Garvin\_Ghostbuster](https://forum.gbfans.com/u/Garvin_Ghostbuster)\
**Post date:** [September 19, 2009, 8:42pm UTC](https://forum.gbfans.com/t/attaching-wire-to-the-smc-straights-l-fittings/35231/2 "2009-09-19T20:42:07Z")

</div>

Get yourself some 5/32 hose! It’s for sale here in the shop!

---

<div class="post-metadata">

**Author:** ![jt001](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/j/a3d4f5/32.png) [@jt001](https://forum.gbfans.com/u/jt001)\
**Post date:** [September 19, 2009, 8:48pm UTC](https://forum.gbfans.com/t/attaching-wire-to-the-smc-straights-l-fittings/35231/3 "2009-09-19T20:48:58Z")

</div>

IIRC you push the plastic thingie and put the wire in place. Once you release it, it’ll be secured. Same with the elbows.

For the elbow connector that goes from the [Ion arm](https://www.gbfans.com/shop/aluminum-welded-ion-arm) to the resistor I used a smaller diameter cable. I then cut a piece of the thicker cable and slipped it over.
