# Bringing the pack even more life...

**URL:** <https://forum.gbfans.com/t/bringing-the-pack-even-more-life/1077>\
**Category:** Proton Packs\
**Created:** [August 24, 2006, 3:47pm UTC](https://forum.gbfans.com/t/bringing-the-pack-even-more-life/1077 "2006-08-24T15:47:16Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![ice11red](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/i/45deac/32.png) [@ice11red](https://forum.gbfans.com/u/ice11red)\
**Post date:** [August 24, 2006, 3:47pm UTC](https://forum.gbfans.com/t/bringing-the-pack-even-more-life/1077/1 "2006-08-24T15:47:16Z")

</div>

OK, well I have a pack with hyperdyne lab lights and sound kit. I was looking at it the other day and thought I would bring it some more life by adding true part to the pack.

I was looking up some prices and stuff and itll cost me another couple hundred dollars to get the clippard valves, and brass connectors, I also ordered the metal gun hooks from Rhett and aluminum [Ion Knob](https://www.gbfans.com/wiki/equipment/proton-pack/ion-knob) from Namebrand, etc. I figure it will give it a more realistic look and hold up a little better.

My question is, for those that have these items already, is it worth it? Because the resin copies look really good. I am just curioum how they compare since its difficult to give that visual of metal and brass just using paint and resin.. And also how much of a weight difference is there from the resin copies and the true metal parts? Since I have a vaccformed pack I dont want to put too much stress on it.

---

<div class="post-metadata">

**Author:** ![Ecto96](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/919ad9/32.png) [@Ecto96](https://forum.gbfans.com/u/Ecto96)\
**Post date:** [August 24, 2006, 4:48pm UTC](https://forum.gbfans.com/t/bringing-the-pack-even-more-life/1077/2 "2006-08-24T16:48:59Z")

</div>

I honestly don’t know, but I’m willing to bet those clippards could be up to a pound each, they look like the real thing is heavy.

---

<div class="post-metadata">

**Author:** ![irricanian](https://forum.gbfans.com/user_avatar/forum.gbfans.com/irricanian/32/5887_2.png) [@irricanian](https://forum.gbfans.com/u/irricanian)\
**Post date:** [August 24, 2006, 5:15pm UTC](https://forum.gbfans.com/t/bringing-the-pack-even-more-life/1077/3 "2006-08-24T17:15:52Z")

</div>

I have real Clippard valves and fittings (Brass) on mine and am in process of putting my brass Alkon fittings and real [Legris](https://www.gbfans.com/wiki/equipment/proton-pack/legris) elbows on to switch out my resin ones. The weight is not that bad \<less than 1 lb\>

---

<div class="post-metadata">

**Author:** ![Radar](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/r/d9b06d/32.png) [@Radar](https://forum.gbfans.com/u/Radar)\
**Post date:** [August 24, 2006, 5:46pm UTC](https://forum.gbfans.com/t/bringing-the-pack-even-more-life/1077/4 "2006-08-24T17:46:36Z")

</div>

There’s no way the Clippards weigh anywhere near that much, given their size. As for the real parts vs. resin parts, there’s several factors to consider. Sure, you can’t beat using the real thing, but 99.999% of people aren’t going to notice that your pack was built using real parts. (However, 100% of people will notice that you have a cool pack, regardless of what kind of parts you go with.) Heck, the [Nycoil](https://www.gbfans.com/wiki/equipment/proton-pack/nycoil) banjo elbows on the tip of my wand are made of finely-sanded and puttied wood and almost everyone that’s seen them thinks they’re real metal. Most people just don’t look real hard at stuff like that.

Also, there’s the cost issue. Money is no object to some people here (and it makes me worry about them a little bit :? ) and the cost of buying real parts is above and beyond anything resin. I don’t know how much propfan or the others charge for their resin copies of stuff, but I’ve got a pretty good idea that a [resin crank knob](https://www.gbfans.com/shop/resin-crank-knob) sells for alot lower than $65, which is what a real [crank knob](https://www.gbfans.com/shop/crank-knob) goes for these days. It depends on how much dough you’re willing to drop on this thing.

Then there’s the problem of the weight of the parts on top of the thin plastic shell. If you reinforced the shell in the right places I don’t think it would be a problem. Stick a wood block under the places that are going to be under the most stress and you might even want to use a solid wood block for mounting the wand to the pack.

So I guess this is what it boils down to: most people are never going to notice whether your parts are real or resin so I wouldn’t worry too much about the look. However, don’t buy real parts if you’re working on a small budget. Finally, regardless of which parts you buy, reinforcing the pack might be a good idea.

---

<div class="post-metadata">

**Author:** ![GB\_Ash](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/g/cab0a1/32.png) [@GB\_Ash](https://forum.gbfans.com/u/GB_Ash)\
**Post date:** [August 24, 2006, 6:29pm UTC](https://forum.gbfans.com/t/bringing-the-pack-even-more-life/1077/5 "2006-08-24T18:29:44Z")

</div>

I have a vacuformed pack with a combination of real and resin parts. Can you tell the difference between the two?

![image](http://users.adelphia.net/~pzoda/ghostbuster.jpg)

---

<div class="post-metadata">

**Author:** ![Master\_Taran](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/m/e95f7d/32.png) [@Master\_Taran](https://forum.gbfans.com/u/Master_Taran)\
**Post date:** [August 25, 2006, 11:59pm UTC](https://forum.gbfans.com/t/bringing-the-pack-even-more-life/1077/6 "2006-08-25T23:59:36Z")

</div>

Hard to say…the pic is a bit fuzzy. Off hand, though, I don’t think I’d be able to tell a difference if I wasn’t closely examining any given part.

Anyway, my opinion on the matter is that the people who like to go with real parts probably aren’t doing it so that people will look at it and say, “WOW! You used real parts,” because I that isn’t something anyone in the general public (or even the propping community for that matter), is likely to say. They probably do it because for them, having real parts makes the prop feel more “real”. I think it really boils down to a personal feeling of satisfaction, of knowing that your pack is that much closer to the real deal. That, and model paint can’t compare to real metal close up.

---

<div class="post-metadata">

**Author:** ![gbmatt](https://forum.gbfans.com/user_avatar/forum.gbfans.com/gbmatt/32/5875_2.png) [@gbmatt](https://forum.gbfans.com/u/gbmatt)\
**Post date:** [August 26, 2006, 12:29am UTC](https://forum.gbfans.com/t/bringing-the-pack-even-more-life/1077/7 "2006-08-26T00:29:51Z")

</div>

besides most ppl are in shock at it and dont look really close at that type of stuff.. or if they do they probably dont know the difference unless they know about the parts and all

---

<div class="post-metadata">

**Author:** ![RoboProp](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/r/b77776/32.png) [@RoboProp](https://forum.gbfans.com/u/RoboProp)\
**Post date:** [August 26, 2006, 3:52am UTC](https://forum.gbfans.com/t/bringing-the-pack-even-more-life/1077/8 "2006-08-26T03:52:03Z")

</div>

True dat!

Darrin

---

<div class="post-metadata">

**Author:** ![Radar](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/r/d9b06d/32.png) [@Radar](https://forum.gbfans.com/u/Radar)\
**Post date:** [August 26, 2006, 8:06am UTC](https://forum.gbfans.com/t/bringing-the-pack-even-more-life/1077/9 "2006-08-26T08:06:37Z")

</div>

> [@samhain18](#):
>
> besides most ppl are in shock at it and dont look really close at that type of stuff..

Absolutely right. Most people at costume parties will go “Hey, you’ve got the backpack and everything!”, not “Say, are those Clippard R-701’s? You sly devil!” 8)

If it’s a matter of personal satisfaction and you can afford it, go for the real parts by all means. If it’s a matter of just wanting to have a cool pack for Halloween, you could have a Buzz Lightyear backpack with an old umbrella chained to it for all most people care. As long as you’ve got the arm patch and a tan (or grey, for you purists) [flight suit](https://www.gbfans.com/wiki/equipment/uniform), you’re a Ghostbuster to the general public.
