# casting help...

**URL:** <https://forum.gbfans.com/t/casting-help/5864>\
**Category:** Proton Packs\
**Created:** [July 30, 2008, 5:22am UTC](https://forum.gbfans.com/t/casting-help/5864 "2008-07-30T05:22:53Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Drew0682](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/d/e56c9b/32.png) [@Drew0682](https://forum.gbfans.com/u/Drew0682)\
**Post date:** [July 30, 2008, 5:22am UTC](https://forum.gbfans.com/t/casting-help/5864/1 "2008-07-30T05:22:53Z")

</div>

I was hoping someone on the board could give me some advice on mold making. I’ve been going by Venkman71’s casting plans, but I’m not sure on which brands, or which types of items I’ll need

i.e. the silicone rubber. Smooth-on brand perhaps, how much will I need of it

the 1638 or 1630 brushable resin. where can I get this from.

I’ve found fiberglass, and resin at meijer in the automotive dept. that stuff should work, but it’s the other products I’m not sure of.

Thanks,

Drew

---

<div class="post-metadata">

**Author:** ![Exoray](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/d26b3c/32.png) [@Exoray](https://forum.gbfans.com/u/Exoray)\
**Post date:** [July 30, 2008, 7:06am UTC](https://forum.gbfans.com/t/casting-help/5864/2 "2008-07-30T07:06:08Z")

</div>

Try reading the forum a bit, I have detailed much of this several times…