# Changes to Stefan Plans for Cyclotron/Sync Spacer?

**URL:** <https://forum.gbfans.com/t/changes-to-stefan-plans-for-cyclotron-sync-spacer/10201>\
**Category:** Proton Packs\
**Created:** [February 14, 2018, 3:30pm UTC](https://forum.gbfans.com/t/changes-to-stefan-plans-for-cyclotron-sync-spacer/10201 "2018-02-14T15:30:50Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![notsabbat](https://forum.gbfans.com/user_avatar/forum.gbfans.com/notsabbat/32/188412_2.png) [@notsabbat](https://forum.gbfans.com/u/notsabbat)\
**Post date:** [February 14, 2018, 3:30pm UTC](https://forum.gbfans.com/t/changes-to-stefan-plans-for-cyclotron-sync-spacer/10201/1 "2018-02-14T15:30:50Z")

</div>

Hello all;

Back in October I made this 3d printed pack for Halloween;

 ![hPEQ3Ek](https://discdn.gbfans.com/original/3X/7/f/7fe244e260eb1d8e26d4d071c5fec116557a8a5c.jpeg)  
It was based off of Stefan’s plans (downloaded from Thingaverse, not self made). My goal, like a lot of people, was to try getting as close to screen accurate as possible. However after I had time to really dig into the dimensions of the pack, I realized how much the Stefan plans were from the actual props. I have gotten some good information on most of the parts of the pack from looking at reference pictures and threads such as this one:

> **[Updating Stefan's Plans with new GBFANS Plans](https://forum.gbfans.com/viewtopic.php?f=2&t=34913&hilit=UPDATING+STEFAN&start=300)**
>
> I agree that we should continue to discuss the gearbox … furthermore, I don’t think the gun mount was discussed much at all. Ramjet posted the link to his drawing, but discussion was sidetracked again to the power cell. Here’s Ramjet’s post to...

and this one:

> **[New GBFans Pack Plans](https://forum.gbfans.com/viewtopic.php?f=2&t=36998&p=4892882&hilit=ion+arm+stefan)**
>
> So I have had a pass at the synchronous generator. These are purely based of Stefan’s plans. Does anyone know of any stats, measurements or references that would be of note here?

I am currently building my own set of STLs based on Stefan’s plans and modified from online references. Specifically the pack in the Sony lobby and the measurements they took of said pack. This thread: [Updating Stefan's Plans with new GBFANS Plans - #301 by BSjohnson - Proton Packs - GBFans.com](http://www.gbfans.com/forum/viewtopic.php?f=2&t=34913&hilit=UPDATING+STEFAN&start=300)

This thread: [New GBFans Pack Plans - #63 by alextwigg - Proton Packs - GBFans.com](http://www.gbfans.com/forum/viewtopic.php?f=2&t=36998&p=4892882&hilit=ion+arm+stefan#p4892882)

and the Murray pack images in this thread: [Bill Murray's GB2 Hero Proton Pack Reference Photos - #30 by demon-vice-commander - Proton Packs - GBFans.com](http://www.gbfans.com/forum/viewtopic.php?f=2&t=39517&p=4899193&hilit=murray+pack+hero#p4899193)

My current updated design looks like this (it currently has the double HGA from the comic book)

 ![image](https://discdn.gbfans.com/original/3X/e/b/ebe6e7b38ded0077709661184c6e2cdefcb13e92.jpeg)

Though I haven’t been able to find much information about about the cyclotron/ Sync Generator spacer as far as measurements

Anyone know of any changes to the dimensions of these parts that have been uncovered since Stefan made his plans? I have already added the 14th plate to the Sync spacer.

---

<div class="post-metadata">

**Author:** ![twmedford23](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/48db29/32.png) [@twmedford23](https://forum.gbfans.com/u/twmedford23)\
**Post date:** [February 14, 2018, 9:39pm UTC](https://forum.gbfans.com/t/changes-to-stefan-plans-for-cyclotron-sync-spacer/10201/2 "2018-02-14T21:39:19Z")

</div>

The [cyclotron](https://www.gbfans.com/wiki/equipment/proton-pack/cyclotron) should be 9.5"(not 9") in diameter. The lower rings are slightly smaller than the upper rings but I can’t remember by how much - I have a production lineage shell that I can measure when I get from work tonight if you’d like.

This thread should help fill in the rest of the blanks: [Updating Stefan's Plans with new GBFANS Plans - Proton Packs - GBFans.com](http://www.gbfans.com/forum/viewtopic.php?f=2&t=34913)

---

<div class="post-metadata">

**Author:** ![twmedford23](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/48db29/32.png) [@twmedford23](https://forum.gbfans.com/u/twmedford23)\
**Post date:** [February 14, 2018, 9:42pm UTC](https://forum.gbfans.com/t/changes-to-stefan-plans-for-cyclotron-sync-spacer/10201/3 "2018-02-14T21:42:30Z")

</div>

[http://www.gbfans.com/forum/viewtopic.php?t=25357](http://www.gbfans.com/forum/viewtopic.php?t=25357)

Accurate dimensions for the various parts that are attached to the shell.

---

<div class="post-metadata">

**Author:** ![notsabbat](https://forum.gbfans.com/user_avatar/forum.gbfans.com/notsabbat/32/188412_2.png) [@notsabbat](https://forum.gbfans.com/u/notsabbat)\
**Post date:** [February 15, 2018, 5:44am UTC](https://forum.gbfans.com/t/changes-to-stefan-plans-for-cyclotron-sync-spacer/10201/4 "2018-02-15T05:44:20Z")

</div>

Good information, guys. Thank you.

> [@twmedford23](#):
>
> The cyclotron should be 9.5"(not 9") in diameter. The lower rings are slightly smaller than the upper rings but I can’t remember by how much - I have a production lineage shell that I can measure when I get from work tonight if you’d like.

That would be great thank you. Diameter of the [cyclotron](https://www.gbfans.com/wiki/equipment/proton-pack/cyclotron), diameter of the Sync spacer and The differences between the lower and upper rings are what I have been struggling to find info on.
