# Cheaper parts..

**URL:** <https://forum.gbfans.com/t/cheaper-parts/3969>\
**Category:** Proton Packs\
**Created:** [June 8, 2016, 10:01pm UTC](https://forum.gbfans.com/t/cheaper-parts/3969 "2016-06-08T22:01:42Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![KxngStayPuft](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/k/6bbea6/32.png) [@KxngStayPuft](https://forum.gbfans.com/u/KxngStayPuft)\
**Post date:** [June 8, 2016, 10:01pm UTC](https://forum.gbfans.com/t/cheaper-parts/3969/1 "2016-06-08T22:01:42Z")

</div>

Has anyone either found cheaper parts or even used creativity to find pieces that would work for the hero pack? I got this m&m container from Wal~Mart to use as my [n-filter](https://www.gbfans.com/wiki/equipment/proton-pack/n-filter) on the bottom of the pack. Instead of using a Pringles can. An it looks great. I just wanted to check if anyone’s used anything else, found anything else?

Thanks

---

<div class="post-metadata">

**Author:** ![KoCo](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/k/839c29/32.png) [@KoCo](https://forum.gbfans.com/u/KoCo)\
**Post date:** [June 9, 2016, 2:45am UTC](https://forum.gbfans.com/t/cheaper-parts/3969/2 "2016-06-09T02:45:44Z")

</div>

Don’t tell anyone, but I’m using a [Dale PH-25 resistor](https://www.gbfans.com/shop/dale-ph-25-resistors) with the little ring on top.

They’re much cheaper. 😊

---

<div class="post-metadata">

**Author:** ![thebigone2087](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/d6d6ee/32.png) [@thebigone2087](https://forum.gbfans.com/u/thebigone2087)\
**Post date:** [June 9, 2016, 2:40pm UTC](https://forum.gbfans.com/t/cheaper-parts/3969/3 "2016-06-09T14:40:35Z")

</div>

A lot of people go the PVC route for most of the parts. The plumbing section of Lowes or Home Depot have been very good to a lot of the members here!

---

<div class="post-metadata">

**Author:** ![KxngStayPuft](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/k/6bbea6/32.png) [@KxngStayPuft](https://forum.gbfans.com/u/KxngStayPuft)\
**Post date:** [June 12, 2016, 9:07pm UTC](https://forum.gbfans.com/t/cheaper-parts/3969/4 "2016-06-12T21:07:25Z")

</div>

Well when people use pvc what do they do to cap the pieces off or what? I’ve never built anything with pvc so I don’t really know much about it.

---

<div class="post-metadata">

**Author:** ![thebigone2087](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/d6d6ee/32.png) [@thebigone2087](https://forum.gbfans.com/u/thebigone2087)\
**Post date:** [June 12, 2016, 11:52pm UTC](https://forum.gbfans.com/t/cheaper-parts/3969/5 "2016-06-12T23:52:00Z")

</div>

Ive seen them use PVC endocarps that screw on, or they cover it with smaller pieces of plastic and use epoxy putty to simulate weld lines, or keep it smooth. Alan Hawkins is pretty much the king of the budget pack. Here is one of his threads in which he uses PVC: [http://www.gbfans.com/forum/viewtopic.php?f=2&t=34312](http://www.gbfans.com/forum/viewtopic.php?f=2&t=34312)
