# Conduit from Pack to wand . . . what length?

**URL:** <https://forum.gbfans.com/t/conduit-from-pack-to-wand-what-length/38853>\
**Category:** Proton Packs\
**Created:** [August 5, 2011, 2:04pm UTC](https://forum.gbfans.com/t/conduit-from-pack-to-wand-what-length/38853 "2011-08-05T14:04:17Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![Quagmire9](https://forum.gbfans.com/user_avatar/forum.gbfans.com/quagmire9/32/6315_2.png) [@Quagmire9](https://forum.gbfans.com/u/Quagmire9)\
**Post date:** [August 5, 2011, 2:04pm UTC](https://forum.gbfans.com/t/conduit-from-pack-to-wand-what-length/38853/1 "2011-08-05T14:04:17Z")

</div>

Hi Guys,

I know that somewhere this is probably already on here and discussed at length, but man alive, there are just threads everywhere and i couldn’t find it :walterpeck: obviously there has to be a quantity of hose (cable conduit) either end for ancoring to the pack AND the wand, but what i would love to know is the basic length of the hose from the point it leaves the pack, and joins the wand. any help would be greatly appreciated 😃

thanks in advance guys 😃

---

<div class="post-metadata">

**Author:** ![demon-vice-commander](https://forum.gbfans.com/user_avatar/forum.gbfans.com/demon-vice-commander/32/186000_2.png) [@demon-vice-commander](https://forum.gbfans.com/u/demon-vice-commander)\
**Post date:** [August 5, 2011, 2:17pm UTC](https://forum.gbfans.com/t/conduit-from-pack-to-wand-what-length/38853/2 "2011-08-05T14:17:26Z")

</div>

**3/4" Split Loom**

Gun to Pack: 5 ft.

Gear Box to Vacuum Tube: 2 ft.

**1/4" Split Loom**

HGA to [Filler Tube](https://www.gbfans.com/shop/aluminum-welded-filler-tube) (also called the “[Beam Line](https://www.gbfans.com/shop/aluminum-welded-beam-line)”): 2 ft.

Boots for [Injectors](https://www.gbfans.com/wiki/equipment/proton-pack/injectors) & Sage M50W Resistor to PPD: 1-1.25" (six needed)

> **[Split Loom Tubing - GBFans.com Wiki | GBFans.com](http://www.gbfans.com/wiki/equipment/proton-pack/split-loom)**
>
> There is also split loom or corrugated tubing (shielding) used on the pack. A 1/4\\" ID split loom is used to cover the red tubing from the beam line to the bras

---

<div class="post-metadata">

**Author:** ![Quagmire9](https://forum.gbfans.com/user_avatar/forum.gbfans.com/quagmire9/32/6315_2.png) [@Quagmire9](https://forum.gbfans.com/u/Quagmire9)\
**Post date:** [August 5, 2011, 2:20pm UTC](https://forum.gbfans.com/t/conduit-from-pack-to-wand-what-length/38853/3 "2011-08-05T14:20:32Z")

</div>

> [@Demon Vice Commander](#):
>
> **3/4" Split Loom**
> 
> Gun to Pack: 5 ft.
> 
> Gear Box to Vacuum Tube: 2 ft.
> 
> **1/4" Split Loom**
> 
> HGA to Filler Tube (also called the “Beam Line”): 2 ft.
> 
> Boots for Injectors & Sage M50W Resistor to PPD: 1-1.25" (six needed)
> 
> [http://www.gbfans.com/equipment/proton-pack/split-loom/](http://www.gbfans.com/equipment/proton-pack/split-loom/)

thank you very much 😃 and thanks for such a speedy response 😉 awesome 😃

---

<div class="post-metadata">

**Author:** ![demon-vice-commander](https://forum.gbfans.com/user_avatar/forum.gbfans.com/demon-vice-commander/32/186000_2.png) [@demon-vice-commander](https://forum.gbfans.com/u/demon-vice-commander)\
**Post date:** [August 5, 2011, 2:31pm UTC](https://forum.gbfans.com/t/conduit-from-pack-to-wand-what-length/38853/4 "2011-08-05T14:31:12Z")

</div>

No problem; there’s a wealth of information on this site. Don’t be afraid to browse through the equipment section.

---

<div class="post-metadata">

**Author:** ![Lewis\_S](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/l/a87d85/32.png) [@Lewis\_S](https://forum.gbfans.com/u/Lewis_S)\
**Post date:** [January 2, 2012, 11:17am UTC](https://forum.gbfans.com/t/conduit-from-pack-to-wand-what-length/38853/5 "2012-01-02T11:17:21Z")

</div>

Sorry to bump an old thread but when the diameter of the conduit is shown, is that ID or OD?

I only ask as I’ve managed to find a UK seller who does all conduits in either split or non split.

Many thanks guys and girls

---

<div class="post-metadata">

**Author:** ![janderson0719](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/j/e36b37/32.png) [@janderson0719](https://forum.gbfans.com/u/janderson0719)\
**Post date:** [January 2, 2012, 6:23pm UTC](https://forum.gbfans.com/t/conduit-from-pack-to-wand-what-length/38853/6 "2012-01-02T18:23:26Z")

</div>

Those lengths are too long.

5 + 2 = 7 and sellers on here only provide 6ft worth of hose.

It really varies, but if there must be an answer, I would say 4 ft from pack to thrower and 18 inches from crank gen to vacuum tube.

---

<div class="post-metadata">

**Author:** ![aj-quick](https://forum.gbfans.com/user_avatar/forum.gbfans.com/aj-quick/32/188008_2.png) [@aj-quick](https://forum.gbfans.com/u/aj-quick)\
**Post date:** [January 2, 2012, 6:25pm UTC](https://forum.gbfans.com/t/conduit-from-pack-to-wand-what-length/38853/7 "2012-01-02T18:25:44Z")

</div>

Typically for length you want to put on as much as you feel comfortable with given your arm length.

---

<div class="post-metadata">

**Author:** ![Lewis\_Tully](https://forum.gbfans.com/user_avatar/forum.gbfans.com/lewis_tully/32/5930_2.png) [@Lewis\_Tully](https://forum.gbfans.com/u/Lewis_Tully)\
**Post date:** [January 2, 2012, 8:07pm UTC](https://forum.gbfans.com/t/conduit-from-pack-to-wand-what-length/38853/8 "2012-01-02T20:07:46Z")

</div>

Yeah, I didn’t want my tubing to loop over my arm, so I made it shorter. I feel like for practicality reasons this is up to the individual wearer. Of course there will always be screen accurate choices, but for someone who takes their packs out to an event I think practicality and functionality over accuracy is always the answer.

BTW: Quagmire, can’t wait to see the 84 Original Nightmare Silicone! Do you have any progress pics? This was always my favorite version of Fred. Can’t wait to see someone do it right!

---

<div class="post-metadata">

**Author:** ![KagaSakai](https://forum.gbfans.com/user_avatar/forum.gbfans.com/kagasakai/32/6197_2.png) [@KagaSakai](https://forum.gbfans.com/u/KagaSakai)\
**Post date:** [January 3, 2012, 3:47am UTC](https://forum.gbfans.com/t/conduit-from-pack-to-wand-what-length/38853/9 "2012-01-03T03:47:39Z")

</div>

I think that 13" total from the gear box to the vacuum tube looks the best. I originally had my thrower hose at 5’ total, but found that to be too long, so I trimmed it down to 4’, and after installing there is only about 3.5’ exposed from [cyclotron](https://www.gbfans.com/wiki/equipment/proton-pack/cyclotron) to thrower. But like AJ said, whatever works best for you.
