# Custom GB Pistol (Work in progress) **URL:** \ **Category:** Other Props\ **Created:** [February 19, 2018, 5:55pm UTC](https://forum.gbfans.com/t/custom-gb-pistol-work-in-progress/10604 "2018-02-19T17:55:15Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![SedgewickHotel](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/s/b5a626/32.png) [@SedgewickHotel](https://forum.gbfans.com/u/SedgewickHotel)\ **Post date:** [February 19, 2018, 5:55pm UTC](https://forum.gbfans.com/t/custom-gb-pistol-work-in-progress/10604/1 "2018-02-19T17:55:15Z")
Hi all - I hit a snag in my current project and was hoping for some community help. I’m building a custom pistol for my dark ride, and it uses a GBFans light kit. However, the [bar graph](https://www.gbfans.com/wiki/equipment/proton-pack/bar-graph) is a few extra inches away from where I needed to mount the board itself, so the “flat flex cable” won’t reach. I’ve never seen a cable like this, so I don’t know where to even begin looking for a longer one with the right number of pins. I should note I have spent some time researching, and I tent to _think_ this is a 16pin flat flex cable, and I’m thinking I need something in the 4-6 inch range. I’m thinking something like this might work, but I feel like I’m guessing. [https://www.mouser.com/ProductDetail/Wurth-Electronics/687616100002?qs=sGAEpiMZZMvyL%252b65tEJ%2FL5oVExxJ5OkqvKwPMzLsRR9C3o7GXD0yhA%3D%3D](https://www.mouser.com/ProductDetail/Wurth-Electronics/687616100002?qs=sGAEpiMZZMvyL%252b65tEJ%2fL5oVExxJ5OkqvKwPMzLsRR9C3o7GXD0yhA%3d%3d) Anyone have any ideas? Thanks, Jake ---
**Author:** ![SedgewickHotel](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/s/b5a626/32.png) [@SedgewickHotel](https://forum.gbfans.com/u/SedgewickHotel)\ **Post date:** [February 28, 2018, 4:25am UTC](https://forum.gbfans.com/t/custom-gb-pistol-work-in-progress/10604/2 "2018-02-28T04:25:30Z")
I got the shorter cable to work… For anyone interested: [https://youtu.be/H-llnVgwwn8](https://youtu.be/H-llnVgwwn8)