# Ecto46's Super Duper, High Speed, Low Drag, Styrene Pack Build!

**URL:** <https://forum.gbfans.com/t/ecto46s-super-duper-high-speed-low-drag-styrene-pack-build/7861>\
**Category:** Proton Packs\
**Created:** [November 10, 2017, 2:25am UTC](https://forum.gbfans.com/t/ecto46s-super-duper-high-speed-low-drag-styrene-pack-build/7861 "2017-11-10T02:25:20Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![Ecto46](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/3da27b/32.png) [@Ecto46](https://forum.gbfans.com/u/Ecto46)\
**Post date:** [November 10, 2017, 2:25am UTC](https://forum.gbfans.com/t/ecto46s-super-duper-high-speed-low-drag-styrene-pack-build/7861/1 "2017-11-10T02:25:20Z")

</div>

Hello Folk’s…My names Bart, and I wanna be a Ghostbuster when I grow up ( and have for the last 30 odd years or so…)

So yesterday I took the plunge and ordered up some .125 styrene sheets and a couple sizes of acrylic tube. Got the plans printed out and I’m ready to get on with this bad boy.

Heres to getting some templates plotted out and getting ready to slice and dice some styrene when it gets here…

[![image](https://farm5.staticflickr.com/4548/38243633026_a9094f3a80_z.jpg)](https://flic.kr/p/21gsBHd)[pack001](https://flic.kr/p/21gsBHd) by [Bart Salmons](https://www.flickr.com/photos/144112923@N04/), on Flickr

---

<div class="post-metadata">

**Author:** ![nastynoah](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/n/4af34b/32.png) [@nastynoah](https://forum.gbfans.com/u/nastynoah)\
**Post date:** [November 12, 2017, 9:49pm UTC](https://forum.gbfans.com/t/ecto46s-super-duper-high-speed-low-drag-styrene-pack-build/7861/2 "2017-11-12T21:49:05Z")

</div>

Can’t wait to follow this.

---

<div class="post-metadata">

**Author:** ![Ecto46](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/3da27b/32.png) [@Ecto46](https://forum.gbfans.com/u/Ecto46)\
**Post date:** [November 13, 2017, 6:41pm UTC](https://forum.gbfans.com/t/ecto46s-super-duper-high-speed-low-drag-styrene-pack-build/7861/3 "2017-11-13T18:41:35Z")

</div>

Looks like the styrene sheet will be arriving tomorrow so I styed up late last night and laid out the first template.

][![image](https://farm5.staticflickr.com/4542/38340541186_c3616ddca3_z.jpg)](https://flic.kr/p/21q2i8y)[pack002](https://flic.kr/p/21q2i8y) by [Bart Salmons](https://www.flickr.com/photos/144112923@N04/), on Flickr

Also got some components in today. Acrylic tubing for the prton thrower, and a Pilot Plasma tube, The envy of all pack builders!

[![image](https://farm5.staticflickr.com/4537/26619992609_40f5aa29f3_z.jpg)](https://flic.kr/p/GyjqnP)[pack003](https://flic.kr/p/GyjqnP) by [Bart Salmons](https://www.flickr.com/photos/144112923@N04/), on Flickr

---

<div class="post-metadata">

**Author:** ![Ecto46](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/3da27b/32.png) [@Ecto46](https://forum.gbfans.com/u/Ecto46)\
**Post date:** [November 14, 2017, 4:47pm UTC](https://forum.gbfans.com/t/ecto46s-super-duper-high-speed-low-drag-styrene-pack-build/7861/4 "2017-11-14T16:47:25Z")

</div>

Finally!!! the Big Brown Truck rolled up this morning! Theres a [proton pack](https://www.gbfans.com/wiki/equipment/proton-pack) in that there thang…

[![image](https://discdn.gbfans.com/original/3X/f/6/f66480cd6bcfd1ddf247a691b265f4f2d9b0a3ce.jpeg)](https://flic.kr/p/ZrJR8d)[pack004](https://flic.kr/p/ZrJR8d) by [Bart Salmons](https://www.flickr.com/photos/144112923@N04/), on Flickr

---

<div class="post-metadata">

**Author:** ![Batfly](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/b/858c86/32.png) [@Batfly](https://forum.gbfans.com/u/Batfly)\
**Post date:** [November 14, 2017, 8:16pm UTC](https://forum.gbfans.com/t/ecto46s-super-duper-high-speed-low-drag-styrene-pack-build/7861/5 "2017-11-14T20:16:20Z")

</div>

Yeah baby! Subscribed to this thread.

Look into getting a spst or spdt 12v relay, .1uf resitor, and dpdt momentary push button for the plasma tube. That thing throws off crazy emf making things go wonky. I just bought the relay and resistor Sunday and need to get them in line. Shhh, don’t tell my build thread, I haven’t told it yet lol.

---

<div class="post-metadata">

**Author:** ![Ecto46](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/3da27b/32.png) [@Ecto46](https://forum.gbfans.com/u/Ecto46)\
**Post date:** [November 14, 2017, 11:09pm UTC](https://forum.gbfans.com/t/ecto46s-super-duper-high-speed-low-drag-styrene-pack-build/7861/6 "2017-11-14T23:09:23Z")

</div>

Ohh yes…I have already been sourcing that out…read a couple threads with how to wire round that particular problem…and I ain;t gonna reinvent the wheel…y’all done the heavy lifting already…

---

<div class="post-metadata">

**Author:** ![Ecto46](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/3da27b/32.png) [@Ecto46](https://forum.gbfans.com/u/Ecto46)\
**Post date:** [November 16, 2017, 12:03am UTC](https://forum.gbfans.com/t/ecto46s-super-duper-high-speed-low-drag-styrene-pack-build/7861/7 "2017-11-16T00:03:40Z")

</div>

Got to spend a little quality time with the Hprops templates and the bandsaw today!

[![image](https://farm5.staticflickr.com/4568/37558743705_845b6a02ec_z.jpg)](https://flic.kr/p/ZdWnYD)[pack005](https://flic.kr/p/ZdWnYD) by [Bart Salmons](https://www.flickr.com/photos/144112923@N04/), on Flickr

---

<div class="post-metadata">

**Author:** ![Ecto46](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/3da27b/32.png) [@Ecto46](https://forum.gbfans.com/u/Ecto46)\
**Post date:** [November 18, 2017, 12:34am UTC](https://forum.gbfans.com/t/ecto46s-super-duper-high-speed-low-drag-styrene-pack-build/7861/8 "2017-11-18T00:34:20Z")

</div>

OK lets see some REAL progress for a change! I started assembling the gunbox. First up I rough sanded everything to get a good fit. Then I used a heat gun to bend the side /top section, draping it over a piece of pvc pipe to get a uniform radius

[![image](https://farm5.staticflickr.com/4519/38490399751_bac6bd0942_z.jpg)](https://flic.kr/p/21DgmRV)[pack006](https://flic.kr/p/21DgmRV) by [Bart Salmons](https://www.flickr.com/photos/144112923@N04/), on Flickr

I cleaned up the front piece of the curve to make sure everything lined up nicely…

[![image](https://farm5.staticflickr.com/4525/38490399631_87f7a0cdc2_z.jpg)](https://flic.kr/p/21DgmPR)[pack007](https://flic.kr/p/21DgmPR) by [Bart Salmons](https://www.flickr.com/photos/144112923@N04/), on Flickr

Front bits glued up and doing a little rough sanding. Like how everything is fitting together. Note also the tube of Weld On 16. the only glue I will ever use on this kinda project…Fantastic stuff

[![image](https://farm5.staticflickr.com/4576/38490399571_7b6b795a53_z.jpg)](https://flic.kr/p/21DgmNP)[pack008](https://flic.kr/p/21DgmNP) by [Bart Salmons](https://www.flickr.com/photos/144112923@N04/), on Flickr

Also on a different front I repurposed an old jacket (well my Mom did) by sewing a No Ghosts Logo over a Public atey Insignia that I’m no longer associated with…

[![image](https://farm5.staticflickr.com/4571/37603471615_3fabc79654_z.jpg)](https://flic.kr/p/ZhTC2v)[jacket](https://flic.kr/p/ZhTC2v) by [Bart Salmons](https://www.flickr.com/photos/144112923@N04/), on Flickr

---

<div class="post-metadata">

**Author:** ![Batfly](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/b/858c86/32.png) [@Batfly](https://forum.gbfans.com/u/Batfly)\
**Post date:** [November 18, 2017, 11:23am UTC](https://forum.gbfans.com/t/ecto46s-super-duper-high-speed-low-drag-styrene-pack-build/7861/9 "2017-11-18T11:23:30Z")

</div>

Nice, looking good! The thrower is a motivating piece to start with.

---

<div class="post-metadata">

**Author:** ![Ecto46](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/3da27b/32.png) [@Ecto46](https://forum.gbfans.com/u/Ecto46)\
**Post date:** [November 18, 2017, 2:43pm UTC](https://forum.gbfans.com/t/ecto46s-super-duper-high-speed-low-drag-styrene-pack-build/7861/10 "2017-11-18T14:43:40Z")

</div>

Yes it is! I was kinda stressing over getting that bend in, turned out to be super simple…Gonna try to get the handle/barrel on tonight and look at doing the syncgen and [cyclotron](https://www.gbfans.com/wiki/equipment/proton-pack/cyclotron) next week…

---

<div class="post-metadata">

**Author:** ![Ecto46](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/3da27b/32.png) [@Ecto46](https://forum.gbfans.com/u/Ecto46)\
**Post date:** [November 19, 2017, 1:06am UTC](https://forum.gbfans.com/t/ecto46s-super-duper-high-speed-low-drag-styrene-pack-build/7861/11 "2017-11-19T01:06:54Z")

</div>

Didn;t get a whole lot done today. finished putting the back on the gun box and worked on sanding down the seams…hadda use a touch of putty here and there, but I’m sorta pleased with the way its turning out.

[![image](https://farm5.staticflickr.com/4569/24637826128_3e28f1673e_z.jpg)](https://flic.kr/p/DxaikE)[pack009](https://flic.kr/p/DxaikE) by [Bart Salmons](https://www.flickr.com/photos/144112923@N04/), on Flickr

---

<div class="post-metadata">

**Author:** ![Ecto46](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/3da27b/32.png) [@Ecto46](https://forum.gbfans.com/u/Ecto46)\
**Post date:** [November 19, 2017, 11:52pm UTC](https://forum.gbfans.com/t/ecto46s-super-duper-high-speed-low-drag-styrene-pack-build/7861/12 "2017-11-19T23:52:47Z")

</div>

Getting a handle on things…also drilled some pilot holes and cut the window for the bargraph…

[![image](https://farm5.staticflickr.com/4564/38474234306_f8567d31b1_z.jpg)](https://flic.kr/p/21BQvrm)[pack010](https://flic.kr/p/21BQvrm) by [Bart Salmons](https://www.flickr.com/photos/144112923@N04/), on Flickr

---

<div class="post-metadata">

**Author:** ![Ecto46](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/3da27b/32.png) [@Ecto46](https://forum.gbfans.com/u/Ecto46)\
**Post date:** [November 27, 2017, 6:22am UTC](https://forum.gbfans.com/t/ecto46s-super-duper-high-speed-low-drag-styrene-pack-build/7861/13 "2017-11-27T06:22:50Z")

</div>

OK now that the first round of Holiday Silliness has concluded, I can get back to work in the Bartwerx. Tonights silly Bart Trick is the [Instrument bar](https://www.gbfans.com/wiki/equipment/proton-pack/instrument-bar) and trigger bar.

[![image](https://discdn.gbfans.com/original/3X/5/5/550e0085746cf6b396e7c33717db11d1fbc79dd1.jpeg)](https://flic.kr/p/21Vgwj6)[pack011](https://flic.kr/p/21Vgwj6) by [Bart Salmons](https://www.flickr.com/photos/144112923@N04/), on Flickr

Left an opening on the front that will get a cover plate, and drilled through for wire access. theres a cover for the back of the trigger bar too I glued in some lugs to screw the retaining screws into as well.

[![image](https://discdn.gbfans.com/original/3X/5/d/5d1bd56cd126742e92e02332cbb0f7f2f02466d1.jpeg)](https://flic.kr/p/DMp22q)[pack012](https://flic.kr/p/DMp22q) by [Bart Salmons](https://www.flickr.com/photos/144112923@N04/), on Flickr

I was wondering if my handle wasnt a little too long, but now I see it looks alot better with the IB/TB in place…also predrilled some pilot holes for the switches and lights that will get installed eventually

[![image](https://discdn.gbfans.com/original/3X/6/e/6e5f807f38b8eb53935425af70d436597b489caa.jpeg)](https://flic.kr/p/21QimA9)[pack013](https://flic.kr/p/21QimA9) by [Bart Salmons](https://www.flickr.com/photos/144112923@N04/), on Flickr

---

<div class="post-metadata">

**Author:** ![Batfly](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/b/858c86/32.png) [@Batfly](https://forum.gbfans.com/u/Batfly)\
**Post date:** [November 27, 2017, 3:33pm UTC](https://forum.gbfans.com/t/ecto46s-super-duper-high-speed-low-drag-styrene-pack-build/7861/14 "2017-11-27T15:33:38Z")

</div>

Oh yeah, that’s a great, clean looking IB/TB!

I see the hole in the back of the IB, did you also make a hole between that and the TB?

---

<div class="post-metadata">

**Author:** ![Ecto46](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/3da27b/32.png) [@Ecto46](https://forum.gbfans.com/u/Ecto46)\
**Post date:** [November 27, 2017, 9:25pm UTC](https://forum.gbfans.com/t/ecto46s-super-duper-high-speed-low-drag-styrene-pack-build/7861/15 "2017-11-27T21:25:40Z")

</div>

Yep I sure did…but that is something I would ferget to do…lol The TB is bonded to the IB but I think I’m gonna bolt the IB to the gunbox, just in case…

---

<div class="post-metadata">

**Author:** ![Ecto46](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/3da27b/32.png) [@Ecto46](https://forum.gbfans.com/u/Ecto46)\
**Post date:** [November 28, 2017, 7:44am UTC](https://forum.gbfans.com/t/ecto46s-super-duper-high-speed-low-drag-styrene-pack-build/7861/16 "2017-11-28T07:44:16Z")

</div>

Felt like doing something constructive and messy after I got home from work tonight. Why not start cutting out parts for the pack proper? Been anxious about building the syncgen/cyclotron parts So I figgered I’d go ahead and get them out of the way. I have laid out the spcer template on poster board and then used it to trace onto the styrene. then I had to refer to the plans to lay out the cosmetic plates.

[![image](https://discdn.gbfans.com/original/3X/4/6/46e1c37d361942b9d1cc6472f4bb48e1ff4ff17e.jpeg)](https://flic.kr/p/21SowZU)[pack014](https://flic.kr/p/21SowZU) by [Bart Salmons](https://www.flickr.com/photos/144112923@N04/), on Flickr

I used a combination of the jig saw, band saw, mini hacksaw, and just scoring and snapping to get the basics done. yep, they are rough and will need a lot of clean up. Thats why I have several belt sanders…

[![image](https://discdn.gbfans.com/original/3X/d/3/d3007371e410c5698b912eb13226f5bdf01859d6.jpeg)](https://flic.kr/p/21SowY1)[pack015](https://flic.kr/p/21SowY1) by [Bart Salmons](https://www.flickr.com/photos/144112923@N04/), on Flickr

Kept the cutout of the center to help make the top of the [cyclotron](https://www.gbfans.com/wiki/equipment/proton-pack/cyclotron) and cut strips for the sides and reinforecement of the syncgen…

[![image](https://discdn.gbfans.com/original/3X/a/e/ae52a95e098e16fa5b71ada16ec2c602a1017f9e.jpeg)](https://flic.kr/p/21SowWs)[pack016](https://flic.kr/p/21SowWs) by [Bart Salmons](https://www.flickr.com/photos/144112923@N04/), on Flickr

---

<div class="post-metadata">

**Author:** ![Ecto46](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/3da27b/32.png) [@Ecto46](https://forum.gbfans.com/u/Ecto46)\
**Post date:** [November 30, 2017, 3:11am UTC](https://forum.gbfans.com/t/ecto46s-super-duper-high-speed-low-drag-styrene-pack-build/7861/17 "2017-11-30T03:11:13Z")

</div>

So even though I had to attend training, I had the day off. So after knocking out a few chores I decided to assemble some styrene! The girlfriends youngest decided she wanted to hang out with me this evening, so it was styrene, glue and Cutie Cars…

[![image](https://farm5.staticflickr.com/4542/23869981287_3358a0eea4_z.jpg)](https://flic.kr/p/CniTPv)[pack017](https://flic.kr/p/CniTPv) by [Bart Salmons](https://www.flickr.com/photos/144112923@N04/), on Flickr

After I took the manual sharkskin to the jig saw edges, I measured out the individual plates and scored and snapped them. then did the same for some internal bracing so that the construction could begin in earnest. I started at the bottom and added extra bracing there. then began one at a time mitering one edge and assembling the wall…

[![image](https://farm5.staticflickr.com/4553/23869981237_e8a188bd4f_z.jpg)](https://flic.kr/p/CniTND)[pack018](https://flic.kr/p/CniTND) by [Bart Salmons](https://www.flickr.com/photos/144112923@N04/), on Flickr

Getting the individual plated on wasn;t as hard as I thought it would be, so look out boys…Im breaking out the heat gun. I had already glued in the PVC spacers so I used that as a buck to clamp , heat, and bend the styrene around …

[![image](https://farm5.staticflickr.com/4527/23869981167_017c0cb2e1_z.jpg)](https://flic.kr/p/CniTMr)[pack019](https://flic.kr/p/CniTMr) by [Bart Salmons](https://www.flickr.com/photos/144112923@N04/), on Flickr

Wow…sometimes I amaze myself …Getting the last two sections of wall in place were really a piece of cake after that…

[![image](https://farm5.staticflickr.com/4556/23869981107_bf8d17e4f2_z.jpg)](https://flic.kr/p/CniTLp)[pack020](https://flic.kr/p/CniTLp) by [Bart Salmons](https://www.flickr.com/photos/144112923@N04/), on Flickr

And there we have it Ghostheads… a rough syncgen ready for finishing…

[![image](https://farm5.staticflickr.com/4520/23869981047_dc1f38181f_z.jpg)](https://flic.kr/p/CniTKn)[pack021](https://flic.kr/p/CniTKn) by [Bart Salmons](https://www.flickr.com/photos/144112923@N04/), on Flickr

---

<div class="post-metadata">

**Author:** ![Batfly](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/b/858c86/32.png) [@Batfly](https://forum.gbfans.com/u/Batfly)\
**Post date:** [November 30, 2017, 3:15am UTC](https://forum.gbfans.com/t/ecto46s-super-duper-high-speed-low-drag-styrene-pack-build/7861/18 "2017-11-30T03:15:55Z")

</div>

What have I done? You too with the sandpaper synonyms. Lol. Keep it up!

---

<div class="post-metadata">

**Author:** ![Ecto46](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/3da27b/32.png) [@Ecto46](https://forum.gbfans.com/u/Ecto46)\
**Post date:** [November 30, 2017, 9:20pm UTC](https://forum.gbfans.com/t/ecto46s-super-duper-high-speed-low-drag-styrene-pack-build/7861/19 "2017-11-30T21:20:20Z")

</div>

On another modeling forum that I prequent there was a poll on what do you spend the most time doing on a build? Guess what the overwhelming result was!

---

<div class="post-metadata">

**Author:** ![Ecto46](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/3da27b/32.png) [@Ecto46](https://forum.gbfans.com/u/Ecto46)\
**Post date:** [December 3, 2017, 11:16pm UTC](https://forum.gbfans.com/t/ecto46s-super-duper-high-speed-low-drag-styrene-pack-build/7861/20 "2017-12-03T23:16:52Z")

</div>

Got slowed down over this weekend, basically All I did was the cosmetic plating. Thinking I’ll move on to the EDA/PPD assmbly after work tonight…

[![image](https://farm5.staticflickr.com/4541/27041110089_0ec63539bd_z.jpg)](https://flic.kr/p/HcwKW2)[pack022](https://flic.kr/p/HcwKW2) by [Bart Salmons](https://www.flickr.com/photos/144112923@N04/), on Flickr

[Next page](https://forum.gbfans.com/t/ecto46s-super-duper-high-speed-low-drag-styrene-pack-build/7861.md?page=2)
