# Event Horizon's proton pack - from start to finish

**URL:** <https://forum.gbfans.com/t/event-horizons-proton-pack-from-start-to-finish/31840>\
**Category:** Proton Packs\
**Created:** [September 1, 2009, 7:03pm UTC](https://forum.gbfans.com/t/event-horizons-proton-pack-from-start-to-finish/31840 "2009-09-01T19:03:48Z")\
**Posts on this page:** 10\
**Page:** 1

<div class="post-metadata">

**Author:** ![EventHorizon5](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/46a35a/32.png) [@EventHorizon5](https://forum.gbfans.com/u/EventHorizon5)\
**Post date:** [September 1, 2009, 7:03pm UTC](https://forum.gbfans.com/t/event-horizons-proton-pack-from-start-to-finish/31840/1 "2009-09-01T19:03:48Z")

</div>

First I just want to say Hi to everyone because this is my first post. I’ve been using this site as a resource for my [proton pack](https://www.gbfans.com/wiki/equipment/proton-pack) build and not once did I need to ask a question, found everything through the search. Horray for newbies who can use the search function!

It was the end of June and with another whole month to go before school starts back up, I was dying for something productive to do. I’m a laser engineering student and originally my plan was to construct a portable CO2 laser with a backpack mounted power system so I could take it outside and set beehives on fire and the like. I was searching “ghostbusters backpack mount” on Google because I figured I’d use the same system for my own project. When I found this site, I not only found what I was looking for but I was also inspired to build a replica proton pack as well simply because of how cool it looked. So I borrowed my dad’s jigsaw, hauled an old sheet of 3/4 inch plywood out of the shed and set to work.

It was about this point where I completely lost interest in my original idea and started working on the proton pack exclusively. At wal-mart I found the requisite turntable, but I couldn’t find the cake pan needed. I instead went with a similar pie pan but the edges have a more gradual slope and as such the [cyclotron](https://www.gbfans.com/wiki/equipment/proton-pack/cyclotron) is a bit smaller.

I went out to home depot for some MDF, but the only mdf they had in a size that could fit into my little Cavalier were pre-primered MDF shelves, 3/4 inch thick! So I spent about an hour a day working on the pack and little by little it came together.

I didn’t realize until it was too late that I glued the [ion arm](https://www.gbfans.com/shop/aluminum-welded-ion-arm) down backwards. Oh well, not many people will notice! The [synchronous generator](https://www.gbfans.com/wiki/equipment/proton-pack/synchronous-generator) is made of a large corrugated plastic sign, the rest is made of the 3/4 inch MDF on a plywood [motherboard](https://www.gbfans.com/wiki/equipment/proton-pack/motherboard) with various PVC pipes.

Officially this is a test fit…

… but let’s not ■■■■ ourselves. I just wanted an excuse to wear it.

I put a first coat on the cyclotron, and used some old trailer brake light lenses for the lights. It was around this time I realized that a totally movie-accurate build was going to be impossible, considering this had been the first time I actually built anything more than a simple box from scratch. The [bumper](https://www.gbfans.com/wiki/equipment/proton-pack/bumper) isn’t anything special, but to spice it up a little bit I decided to leave the metal L brackets exposed. I also ended up making the gun mount box out of three failed ion arm cuts out of MDF, with the nicest one on top and the others underneath. The EDA is screwed into the motherboard from the back to house the electronics. By this time I was so tired of cutting wood that I skipped the cosmetic plating on both sides of the synchronous gen and just cut out an L-shaped piece of styrofoam and glued it into the middle. The [injectors](https://www.gbfans.com/wiki/equipment/proton-pack/injectors) are capped with duct-tape and electrical tape. The fins on the gearbox and [power cell](https://www.gbfans.com/wiki/equipment/proton-pack/power-cell) are strips cut from wooden paint stirrers that you get for free when you buy paint from home depot. I had to modify the fin design on the gearbox to hide the gaps in the box which resulted from shoddy cuts. I used some old putty to fill in the many cracks and gaps all over. The brass rod on the ion arm is actually a copper rod. Since brass rods go for $15 at home depot I just cut up an old copper lawn ornament and used it instead.

I built the electronics package from scratch.

What I have here is a PIC18F4552 microcontroller which is directly driving blue LEDs, all of which have a common ground through 160 ohm resistance. They only light up one at a time, starting from the bottom and moving up to the top, then repeating. The micro is running on its internal 4MHz clock. The cyclotron lights are red LEDs that are also directly driven in a similar fashion. The whole package is powered through a 5V regulator connected to a 12V 4.5Ah lead acid battery. I also ran 12v power to the proton gun which contains the master switch and also some constant-on lights. Overall the entire electrical draw is no more than 45mA which gives me about 100 straight hours (4 straight days) of running time.

After a quick coat of primer

The pack was finally starting to look good. I then painted the whole thing, by hand, with a half inch wide paint brush. I used acrylic paint from the dollar store and frankly, it doesn’t even look that bad, despite taking a long time to paint.

Ad this point I decided I was finished fiddling around inside and glued down the cyclotron and started on the finishing details.

Just as I was finishing up the pack my order from MMM came in with my resin gun parts, and so I set to work getting that together.

I actually went from that stage pictured above to essentially finished in one sitting, so I don’t have any further intermediate pictures. And so without further ado, the finished pack.

As far as the proton gun is concerned I didn’t spend nearly as much time on it as the rest of the pack. I used a different style heatsink, the business end uses a copper pipe instead of a clear one (I kinda like how it looks). It doesn’t even have a [trigger box](https://www.gbfans.com/wiki/equipment/proton-pack/trigger-box), only a single switch. I used only red [cliplites](https://www.gbfans.com/shop/led-cliplites) and only one coat of paint.

There actually isn’t any one part of the pack that is actually movie accurate, for instance the label placement isn’t right, the HGA wires are swapped, the [booster frame](https://www.gbfans.com/wiki/equipment/proton-pack/booster-frame) isn’t correct, ion arm is backwards, [ribbon cable](https://www.gbfans.com/wiki/equipment/proton-pack/ribbon-cable) doesn’t go to quite the right place, etc. But I still think it looks pretty good.

Also, being made almost entirely of 3/4inch MDF, the pack is _heavy!_ I weighed it, just under 30 pounds, making it by far the largest, heaviest thing I have ever made.

I guess the pack isn’t really finished. I plan to upgrade it, bit by bit, over the coming months (years?) with things like a proper bumper, better paint job, more accurate parts, etc. But for all intents and purposes the hard work is done. I’ve already got a tan flightsuit and my mom is in the process of sewing the no ghost patch on it as I type this. Next up, [ecto goggles](https://www.gbfans.com/shop/mattel-ecto-goggles), then maybe a [ghost trap](https://www.gbfans.com/wiki/equipment/ghost-trap), and I also might get no ghost decals for my car…

---

<div class="post-metadata">

**Author:** ![Gareee](https://forum.gbfans.com/user_avatar/forum.gbfans.com/gareee/32/5994_2.png) [@Gareee](https://forum.gbfans.com/u/Gareee)\
**Post date:** [September 1, 2009, 7:20pm UTC](https://forum.gbfans.com/t/event-horizons-proton-pack-from-start-to-finish/31840/2 "2009-09-01T19:20:07Z")

</div>

Don’t love looking at it hanging on the wall?

Are you coming with it to dragoncon this week, or will halloween be your first main “dry run” in public?

---

<div class="post-metadata">

**Author:** ![EventHorizon5](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/46a35a/32.png) [@EventHorizon5](https://forum.gbfans.com/u/EventHorizon5)\
**Post date:** [September 1, 2009, 7:26pm UTC](https://forum.gbfans.com/t/event-horizons-proton-pack-from-start-to-finish/31840/3 "2009-09-01T19:26:10Z")

</div>

Yes, it looks great up on the wall! I’ll be forever worried about it falling though. Not only will it be smashed up pretty good but it will also wreck my guitar hero drums!

Originally my plan was to have it done in time for the Fan Expo in Toronto last weekend. But I didn’t actually finish until last night. I still went though, just without a costume. I’m sure I’ll wear it somewhere before Halloween but I won’t be attending Dragoncon.

I also forgot to mention that I attached a rubber foot to the very bottom of the [motherboard](https://www.gbfans.com/wiki/equipment/proton-pack/motherboard). All throughout construction I could never stand the pack up without the bottom slipping out from underneath. The rubber foot solves that problem admirably and it doesn’t even look out of place. Just a tip.

---

<div class="post-metadata">

**Author:** ![Gareee](https://forum.gbfans.com/user_avatar/forum.gbfans.com/gareee/32/5994_2.png) [@Gareee](https://forum.gbfans.com/u/Gareee)\
**Post date:** [September 2, 2009, 2:30am UTC](https://forum.gbfans.com/t/event-horizons-proton-pack-from-start-to-finish/31840/4 "2009-09-02T02:30:41Z")

</div>

Good idea!

---

<div class="post-metadata">

**Author:** ![EventHorizon5](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/46a35a/32.png) [@EventHorizon5](https://forum.gbfans.com/u/EventHorizon5)\
**Post date:** [September 2, 2009, 3:57am UTC](https://forum.gbfans.com/t/event-horizons-proton-pack-from-start-to-finish/31840/5 "2009-09-02T03:57:52Z")

</div>

For anyone that’s interested here are some higher resolution pictures (clickable thumbnails)

The rubber bumper/foot I was talking about:

The side of the pack (you can also see the set of six washers per bolt being used as a spacer from the alice frame)

Close up of the gearbox so you can see what I did with it

[Ion arm](https://www.gbfans.com/shop/aluminum-welded-ion-arm) is thinner than it’s supposed to be, and also backwards, so the resistors are sideways

Overall pics

EDIT: Also another thing I forgot to mention is with regards to the microcontroller. I also programmed it myself (in assembly no less!). I know that in the movies the lights stay lit while progressing up to the top and then they all go off and start again, and I wrote the code to do just that, but some of the I/O ports I had wired the lights to would only allow one output to be on at a time. My next build will not have this issue.

---

<div class="post-metadata">

**Author:** ![EventHorizon5](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/46a35a/32.png) [@EventHorizon5](https://forum.gbfans.com/u/EventHorizon5)\
**Post date:** [September 3, 2009, 5:21am UTC](https://forum.gbfans.com/t/event-horizons-proton-pack-from-start-to-finish/31840/6 "2009-09-03T05:21:19Z")

</div>

So today I brought the pack to work to show to a friend. When I was pulling it out of the trunk the [ion arm](https://www.gbfans.com/shop/aluminum-welded-ion-arm) fell off! How embarassing!

I fixed this problem with four giant wood screws.

The moral of the story being that hot glue definitely isn’t enough for an ion arm.

I’m beginning to question how long the rest of the pack will hold up. The gearbox, eda, and gun mount block are all screwed in, as well as the proton gun handles, but the synchronous gen, booster, [injectors](https://www.gbfans.com/wiki/equipment/proton-pack/injectors), [cyclotron](https://www.gbfans.com/wiki/equipment/proton-pack/cyclotron), gun grips, clippards and gun details are only glued in place. Also some things are only friction fitted, like the copper pipe on the gun and the vacuum hose. It seems pretty awkward not being able to lift the pack by the bottom of the synchronous gen since that seems like a pretty intuitive place to grab. Also, my friend was about to lift the pack by the [bumper](https://www.gbfans.com/wiki/equipment/proton-pack/bumper), which I had to stop him from doing, since it’s only screwed into the [motherboard](https://www.gbfans.com/wiki/equipment/proton-pack/motherboard) with one screw on each side and a single third screw attaching it to a glued-down clock of wood in the synchronous gen to hold it straight outwards.

I’m pretty sure my next one is going to be built almost completely differently.

Edit: Wow, its incredible how bad the flash can make everything look. It looks better in person! Especially in the dark!

---

<div class="post-metadata">

**Author:** ![Nerdy\_NotionZ](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/n/e8c25b/32.png) [@Nerdy\_NotionZ](https://forum.gbfans.com/u/Nerdy_NotionZ)\
**Post date:** [September 3, 2009, 5:33am UTC](https://forum.gbfans.com/t/event-horizons-proton-pack-from-start-to-finish/31840/7 "2009-09-03T05:33:23Z")

</div>

> [@EventHorizon5](#):
>
> The moral of the story being that hot glue definitely isn’t enough for an ion arm.

Not always true. My [proton pack](https://www.gbfans.com/wiki/equipment/proton-pack) is held together with northing but hotglue.

XD

Only the powercell falls off, but that is because I have a slime tank and stuff glue to it…and people keep hitting it when i have it hung in my room…

---

<div class="post-metadata">

**Author:** ![Gareee](https://forum.gbfans.com/user_avatar/forum.gbfans.com/gareee/32/5994_2.png) [@Gareee](https://forum.gbfans.com/u/Gareee)\
**Post date:** [September 3, 2009, 6:09am UTC](https://forum.gbfans.com/t/event-horizons-proton-pack-from-start-to-finish/31840/8 "2009-09-03T06:09:25Z")

</div>

> [@EventHorizon5](#):
>
> So today I brought the pack to work to show to a friend. When I was pulling it out of the trunk the ion arm fell off! How embarassing!
> 
> The moral of the story being that hot glue definitely isn’t enough for an ion arm.

Thats why I secured as much as possible with wood screws into the back of the mb, and have been slowly replacing hot glued parts with very small amounts of gorilla glue.

After reading about “mozerella packs” down in Texas for the game release, I got a bit more concerned as well about durability.

For the bottom of the sync generator, I made a wooden block slightly larger then it should be, and secured that with liquid nails, and again 2 wood screws put into predrilled pilot holes in that block. Our Mb also has a slightly larger bottom block extension on it as well for the same reason.

Not as accurate, but a “practical design” improvement.

I just 2 days ago accidently popped the cover off my N filters with my shoe… and realized it was never seated properly on my own pack. I had to cut the inner pringles can insert down a little, and then secured that this time with a few drops of gorilla glue. A little goes a LONG way with that stuff. 4 drops of it is a stronger bond then the entire cap circumference done with hot glue.

I think there is an “art” to using gorilla glue, and a learning curve. I hated it during my original construction, but now that I’m familiar with it, I know how to use it properly.

---

<div class="post-metadata">

**Author:** ![OhioGhostbusters](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/o/dbc845/32.png) [@OhioGhostbusters](https://forum.gbfans.com/u/OhioGhostbusters)\
**Post date:** [September 4, 2009, 12:53am UTC](https://forum.gbfans.com/t/event-horizons-proton-pack-from-start-to-finish/31840/9 "2009-09-04T00:53:59Z")

</div>

cool like the [bumper](https://www.gbfans.com/wiki/equipment/proton-pack/bumper)

---

<div class="post-metadata">

**Author:** ![EventHorizon5](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/46a35a/32.png) [@EventHorizon5](https://forum.gbfans.com/u/EventHorizon5)\
**Post date:** [October 20, 2009, 3:14am UTC](https://forum.gbfans.com/t/event-horizons-proton-pack-from-start-to-finish/31840/10 "2009-10-20T03:14:00Z")

</div>

Since I finished the pack I’ve been slowly working fixing up the small mistakes and adding new stuff.

The [bumper](https://www.gbfans.com/wiki/equipment/proton-pack/bumper) used to be attached using only a single screw into the [motherboard](https://www.gbfans.com/wiki/equipment/proton-pack/motherboard) on each side with a third screw into a glued-down block of wood inside the synchronous gen to keep it straight. Needless to say this setup was pretty fragile, and it would never hold up to any actual bumping. I removed this old setup and replaced it with two additional L brackets attaching it to the back of the motherboard. The thing it rock solid now and will easily support the weight of the entire 35lb pack.

The hose running from the pack to the gun was far too long before, and the internal hose was pretty stiff so it didn’t flop down when it came out of the gun, instead it would arch forward and the whole thing stuck out almost a foot infront of me before. I shortened the hose by about 15 inches and cut a slit in the internal hose to let it sharply bend downwards. This design is much better but the hose is still a bit stiff overall.

At first the gunbox just had a pair of red lights that were always on, but it seemed too plain. I made one of the red lights orange and I added a third flashing red light. Looks much more interesting now.

My ALICE frame came with black straps and they just didn’t really look right. I since bought a second frame (eventually for a second pack) with green straps. I swapped the straps out and now it looks a lot better.

I also gave most of the pack a second coat of paint. There were alot of spots I missed last time and now it looks much better. I opted to not go for the weathered look on purpose, because A) I’m lazy, and B) I’d prefer to have a new one!

Finally you may or may not have noticed the red wire on the tip of the proton gun was only connected on one end. I glued that back on so it’s nice looking again.

I wore it outside in my driveway last week without the jumpsuit and an old lady was walking down the street. She stared for at least 30 solid seconds before walking away much faster than she was going when she came. Either she recognized what it was and thought there was a ghost around, or she thought it was a bomb and high-tailed it outta there. Either way, it worked!
