# Fiberglass vs 3d print

**URL:** <https://forum.gbfans.com/t/fiberglass-vs-3d-print/6070>\
**Category:** General Ghostbusters Discussion\
**Created:** [August 2, 2015, 3:30pm UTC](https://forum.gbfans.com/t/fiberglass-vs-3d-print/6070 "2015-08-02T15:30:54Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![Kelvin\_Shackelford](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/k/c77e96/32.png) [@Kelvin\_Shackelford](https://forum.gbfans.com/u/Kelvin_Shackelford)\
**Post date:** [August 2, 2015, 3:30pm UTC](https://forum.gbfans.com/t/fiberglass-vs-3d-print/6070/1 "2015-08-02T15:30:54Z")

</div>

I’m in the process of buying a commission build, and I have the decision of buying a original fiberglass build or a 3d printed pack. I know one is more cost effective that the other, but I do want quality and durability. Would a 3d printed pack hold up and long as far as durability as a fiberglass pack. I’m willing to pay the money for a great build, but I’m also willing to save a buck if I can. I’m torn between the two and don’t know what would be the best route.

---

<div class="post-metadata">

**Author:** ![Tyrael](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/a6a055/32.png) [@Tyrael](https://forum.gbfans.com/u/Tyrael)\
**Post date:** [August 2, 2015, 4:17pm UTC](https://forum.gbfans.com/t/fiberglass-vs-3d-print/6070/2 "2015-08-02T16:17:15Z")

</div>

It depends on how the pack is printed and the quality of the fiberglass shell. Any fiberglass from people on this site will be great and durable, but that usually comes at the cost of increased weight.

If you can find someone to do tge printing of the lack for you, you’ll need to choose what material it’s made from. Avoid PLA as it has a low melting temperature. The structure of the pack will vary based on how big the person’s printer is. Most home-use printers have a bed far too small to print a full pack, so it will have to be done in parts and assembled, which can be structurally weaker than a shell that is all one piece.

---

<div class="post-metadata">

**Author:** ![Kelvin\_Shackelford](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/k/c77e96/32.png) [@Kelvin\_Shackelford](https://forum.gbfans.com/u/Kelvin_Shackelford)\
**Post date:** [August 2, 2015, 4:25pm UTC](https://forum.gbfans.com/t/fiberglass-vs-3d-print/6070/3 "2015-08-02T16:25:29Z")

</div>

I see what your saying…hmm that seem to be the case.

---

<div class="post-metadata">

**Author:** ![Tyrael](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/a6a055/32.png) [@Tyrael](https://forum.gbfans.com/u/Tyrael)\
**Post date:** [August 2, 2015, 4:37pm UTC](https://forum.gbfans.com/t/fiberglass-vs-3d-print/6070/4 "2015-08-02T16:37:07Z")

</div>

One of the worst things you can do for yourself is try and cut corners on the main shell. If you go fiberglass, get one from a seller on this site. Avoid eBay like the plague. It is rife with shoddy second-hand knockoff shells and kits sold by douchebags and scam artists like VideoBob.

---

<div class="post-metadata">

**Author:** ![Kelvin\_Shackelford](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/k/c77e96/32.png) [@Kelvin\_Shackelford](https://forum.gbfans.com/u/Kelvin_Shackelford)\
**Post date:** [August 2, 2015, 5:04pm UTC](https://forum.gbfans.com/t/fiberglass-vs-3d-print/6070/5 "2015-08-02T17:04:54Z")

</div>

Yea I agree, definitely would buy from someone other than on gbfans. I think I will go fiberglass, just seems like a better and more durable product even if I have to shed out extra money, I think it will be worth it. Thanks for that info.

---

<div class="post-metadata">

**Author:** ![cprich22](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/c/49beb7/32.png) [@cprich22](https://forum.gbfans.com/u/cprich22)\
**Post date:** [September 29, 2015, 6:13pm UTC](https://forum.gbfans.com/t/fiberglass-vs-3d-print/6070/6 "2015-09-29T18:13:05Z")

</div>

i printed my pack, ive had no problems with it, its strong and alot lighter than somem of the fiberglass packs ive tried on thanks to the honey come structure of the walls. its all modular too so if a part gets damaged i can unscrew it print a new one paint it and slap it back on without having to deal with scars or fiberglass repair. it is an extreamly tough pack while being light weight and looks accurate. Id reccomend 3d printed

---

<div class="post-metadata">

**Author:** ![Alan\_Hawkins](https://forum.gbfans.com/user_avatar/forum.gbfans.com/alan_hawkins/32/4015_2.png) [@Alan\_Hawkins](https://forum.gbfans.com/u/Alan_Hawkins)\
**Post date:** [September 29, 2015, 6:32pm UTC](https://forum.gbfans.com/t/fiberglass-vs-3d-print/6070/7 "2015-09-29T18:32:17Z")

</div>

Has someone released the files for a build? I know there have been a few..

---

<div class="post-metadata">

**Author:** ![TheKevinShow](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/ecd19e/32.png) [@TheKevinShow](https://forum.gbfans.com/u/TheKevinShow)\
**Post date:** [September 29, 2015, 7:37pm UTC](https://forum.gbfans.com/t/fiberglass-vs-3d-print/6070/8 "2015-09-29T19:37:03Z")

</div>

> [@Alan Hawkins](#):
>
> Has someone released the files for a build? I know there have been a few..

I’d like to know this as well, since while my current packs are scratch built, I am planning to buy a Dremel 3D printer to print some packs in the future.

---

<div class="post-metadata">

**Author:** ![LandoSystem](https://forum.gbfans.com/user_avatar/forum.gbfans.com/landosystem/32/6436_2.png) [@LandoSystem](https://forum.gbfans.com/u/LandoSystem)\
**Post date:** [September 29, 2015, 10:25pm UTC](https://forum.gbfans.com/t/fiberglass-vs-3d-print/6070/9 "2015-09-29T22:25:31Z")

</div>

> [@Alan Hawkins](#):
>
> Has someone released the files for a build? I know there have been a few..

There are a few different files on Thingiverse. A few are comprehensive with the shell and mobo and others concentrate on specific parts.
