# Finding stl's for a full sized spirit pack.

**URL:** <https://forum.gbfans.com/t/finding-stls-for-a-full-sized-spirit-pack/21071>\
**Category:** Proton Packs\
**Created:** [June 28, 2024, 10:04am UTC](https://forum.gbfans.com/t/finding-stls-for-a-full-sized-spirit-pack/21071 "2024-06-28T10:04:12Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![RageQuitDad](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/r/b782af/32.png) [@RageQuitDad](https://forum.gbfans.com/u/RageQuitDad)\
**Post date:** [June 28, 2024, 10:04am UTC](https://forum.gbfans.com/t/finding-stls-for-a-full-sized-spirit-pack/21071/1 "2024-06-28T10:04:12Z")

</div>

So I want to upgrade my spirit pack, and can find a few items online but not all.

I bought the STL’s for the [cyclotron](https://www.gbfans.com/wiki/equipment/proton-pack/cyclotron) upgrade with [bumper](https://www.gbfans.com/wiki/equipment/proton-pack/bumper), and have printed some of the parts I need by buying the stl’s on Etsy.

I am currently trying to find a complete booster upgrade (Tube and frame, I already found a ladder stl), and the HGA.

I can find them already printed, but the cost of having them shipped to the UK is insane! And the only stl’s I can find are for the 80% pack.

Any advice on where I can buy the stl’s I am looking for?

---

<div class="post-metadata">

**Author:** ![jtysonlambert](https://forum.gbfans.com/user_avatar/forum.gbfans.com/jtysonlambert/32/187369_2.png) [@jtysonlambert](https://forum.gbfans.com/u/jtysonlambert)\
**Post date:** [June 28, 2024, 1:48pm UTC](https://forum.gbfans.com/t/finding-stls-for-a-full-sized-spirit-pack/21071/2 "2024-06-28T13:48:47Z")

</div>

I’m not too familiar with the Spirit packs, but I don’t see a reason why the TacoBelli Q-Pack parts wouldn’t be compatible with little to no problems if you’re modding the 100% pack.

> **[GitHub - mr-kiou/q-pack: Open source version of the proton pack from the...](https://github.com/mr-kiou/q-pack)**
>
> Open source version of the proton pack from the Ghostbusters movies

---

<div class="post-metadata">

**Author:** ![tobycj](https://forum.gbfans.com/user_avatar/forum.gbfans.com/tobycj/32/186876_2.png) [@tobycj](https://forum.gbfans.com/u/tobycj)\
**Post date:** [June 28, 2024, 5:15pm UTC](https://forum.gbfans.com/t/finding-stls-for-a-full-sized-spirit-pack/21071/3 "2024-06-28T17:15:52Z")

</div>

Just make the [booster tube](https://www.gbfans.com/wiki/equipment/proton-pack/booster-tube) yourself. You can either use aluminium tube off ebay, or use PVC tubing you can probably get at B&Q or Homebase. Then all you need to do is cut to length, and cut the angle with a mitre saw.