# First uniform build **URL:** \ **Category:** Uniforms\ **Created:** [March 7, 2014, 2:31pm UTC](https://forum.gbfans.com/t/first-uniform-build/13915 "2014-03-07T14:31:48Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![thebigone2087](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/d6d6ee/32.png) [@thebigone2087](https://forum.gbfans.com/u/thebigone2087)\ **Post date:** [March 7, 2014, 2:31pm UTC](https://forum.gbfans.com/t/first-uniform-build/13915/1 "2014-03-07T14:31:48Z")
Welp, since I am about 95% finished my GB1 [proton pack](https://www.gbfans.com/wiki/equipment/proton-pack), I figured I’d like to Con with it or use it for Halloween and other events so I convinced my wife (no small task) to let me put together the uniform. I cannot thank everyone in this community enough for all of the help I have received and the knowledge I have gathered in making this uniform. So here we go… I have just ordered most of the stuff, so I haven’t received anything yet. Here is a rundown of what I have purchased this far: -**Tru-Spec [Flight Suit](https://www.gbfans.com/wiki/equipment/uniform), Khaki** ([www.armysurplusforless.com](http://www.armysurplusforless.com)) $43, not too bad - **Corcoran 985 Jump Boots** ([www.quanticoboot.com](http://www.quanticoboot.com)) $139, best price I found for them. I went with the 985 because of the better sole. It gets snowy here in Maryland, and while the 995 is more screen accurate, I’d rather have the rougher sole. - **GB1 custom name tage and no ghost logo** (Katarra8, [Etsy.com](http://Etsy.com)) -**[Chemical Gloves](https://www.gbfans.com/shop/chemical-gloves)**- GBFans -**Yellow [leg hose](https://www.gbfans.com/wiki/equipment/uniform/yellow-hose)**- GBFans -**[Leg Hose Connector](https://www.gbfans.com/wiki/uncategorized/leg-hose-connector)**- Crix -**[Belt gizmo](https://www.gbfans.com/wiki/equipment/uniform/calculator-circuit-board) holster, Key Fob set, Leg hose fob, and MT500 holster**- Wharin - **Elbow Pads** - Volleyball Knee Pads ([www.cannonsports.com](http://www.cannonsports.com)) $14 I have contacted Spongface for a Belt Gizmo and if he sell just plain-jane MT500’s w/o the bluetooh module or voice module so I’m just waiting to hear back from him. I also missed out on the GBFans khaki belt by only a few hours so once those get back in I’ll order those. I am excited to get started, and will be documenting everything here as I did with my proton pack 🙂 ---
**Author:** ![Higgs1](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/h/ba8739/32.png) [@Higgs1](https://forum.gbfans.com/u/Higgs1)\ **Post date:** [March 7, 2014, 2:47pm UTC](https://forum.gbfans.com/t/first-uniform-build/13915/2 "2014-03-07T14:47:41Z")
If you don’t want to wait for the belt you can get one on ebay super cheap [http://www.ebay.com/itm/161092750715](http://www.ebay.com/itm/161092750715) and use Rit Pearl Gray dye on it to get it to look like a GB1 gray color. I’ve bought two from this guy and ships fast and excellent price. The GB1 belts are more of a gray where as GB2 where khaki, fyi, so if you were going for a GB1 look you’re better off going light gray imo. ---
**Author:** ![thebigone2087](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/d6d6ee/32.png) [@thebigone2087](https://forum.gbfans.com/u/thebigone2087)\ **Post date:** [March 7, 2014, 2:59pm UTC](https://forum.gbfans.com/t/first-uniform-build/13915/3 "2014-03-07T14:59:01Z")
huh… i just might have to do that thanks! ---
**Author:** ![NinePoundHammer](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/n/a87d85/32.png) [@NinePoundHammer](https://forum.gbfans.com/u/NinePoundHammer)\ **Post date:** [March 7, 2014, 3:25pm UTC](https://forum.gbfans.com/t/first-uniform-build/13915/4 "2014-03-07T15:25:09Z")
> [@Higgs1](#): > > If you don’t want to wait for the belt you can get one on ebay super cheap [http://www.ebay.com/itm/161092750715](http://www.ebay.com/itm/161092750715) and use Rit Pearl Gray dye on it to get it to look like a GB1 gray color. > > I’ve bought two from this guy and ships fast and excellent price. > > The GB1 belts are more of a gray where as GB2 where khaki, fyi, so if you were going for a GB1 look you’re better off going light gray imo. Sorry don’t mean to hijack your thread, how adjustable is this belt? I’m a pretty slim guy with about a 30 inch waist would I be able to make this work? ---
**Author:** ![thebigone2087](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/d6d6ee/32.png) [@thebigone2087](https://forum.gbfans.com/u/thebigone2087)\ **Post date:** [March 7, 2014, 3:29pm UTC](https://forum.gbfans.com/t/first-uniform-build/13915/5 "2014-03-07T15:29:55Z")
The listing says its adjustable to 42", I would imagines anything smaller than that would be fine. I could be VERY wrong though :-\ ---
**Author:** ![Higgs1](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/h/ba8739/32.png) [@Higgs1](https://forum.gbfans.com/u/Higgs1)\ **Post date:** [March 7, 2014, 3:48pm UTC](https://forum.gbfans.com/t/first-uniform-build/13915/6 "2014-03-07T15:48:16Z")
> [@NinePoundHammer](#): > > > [@Higgs1](#): > > > > If you don’t want to wait for the belt you can get one on ebay super cheap [http://www.ebay.com/itm/161092750715](http://www.ebay.com/itm/161092750715) and use Rit Pearl Gray dye on it to get it to look like a GB1 gray color. > > > > I’ve bought two from this guy and ships fast and excellent price. > > > > The GB1 belts are more of a gray where as GB2 where khaki, fyi, so if you were going for a GB1 look you’re better off going light gray imo. > > Sorry don’t mean to hijack your thread, how adjustable is this belt? I’m a pretty slim guy with about a 30 inch waist would I be able to make this work? Yeah I bought one for myself and one for my wife. My wife is 4’11" like 115, small. I had to adjust it all the way down to the smallest hook but it fits her well. And it goes up to 42" waist so no issues there either. Should be good to go for 30" waist without issue! ---
**Author:** ![NinePoundHammer](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/n/a87d85/32.png) [@NinePoundHammer](https://forum.gbfans.com/u/NinePoundHammer)\ **Post date:** [March 7, 2014, 4:00pm UTC](https://forum.gbfans.com/t/first-uniform-build/13915/7 "2014-03-07T16:00:07Z")
Nice thanks for the feedback guys, I figured I’d be alright but just wanted to make sure ---
**Author:** ![Heroic35](https://forum.gbfans.com/user_avatar/forum.gbfans.com/heroic35/32/4022_2.png) [@Heroic35](https://forum.gbfans.com/u/Heroic35)\ **Post date:** [March 7, 2014, 9:04pm UTC](https://forum.gbfans.com/t/first-uniform-build/13915/8 "2014-03-07T21:04:03Z")
If you need bigger than 42, hook two together. I’m at 43-44 and it’s…a struggle with one or the opinion to buy two. I have one and 30 should be no problem. ---
**Author:** ![thebigone2087](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/d6d6ee/32.png) [@thebigone2087](https://forum.gbfans.com/u/thebigone2087)\ **Post date:** [March 15, 2014, 7:47pm UTC](https://forum.gbfans.com/t/first-uniform-build/13915/9 "2014-03-15T19:47:44Z")
OK, big update here folks! SO I have been in California for work and just got back to Baltimore yesterday morning (agh the cold), and as I got back my wife proclaims, “More of your ■■■■ showed up when you were gone! Its by the trash can!” Thanks babe 🙂 ![image](https://discdn.gbfans.com/original/1X/397d6ee216d0b09928814ccc829c7f2fdbd8f20e.gif) So, there were a lot of awesome things that arrived and I have another few things that are on the way so lets get started!! First up… the [Flight Suit](https://www.gbfans.com/wiki/equipment/uniform) 🙂 Tru-Spec Khaki suit, 2XL size which actually fits very well and i surprisingly comfortable. ![image](https://discdn.gbfans.com/original/1X/397d6ee216d0b09928814ccc829c7f2fdbd8f20e.gif) Elbow Pads (which are actually knee pads… until I have done with them anyway!) ![image](https://discdn.gbfans.com/original/1X/397d6ee216d0b09928814ccc829c7f2fdbd8f20e.gif) M1936 [Pistol Belt](https://www.gbfans.com/shop/uniform-pistol-belt) ![image](https://discdn.gbfans.com/original/1X/397d6ee216d0b09928814ccc829c7f2fdbd8f20e.gif) [NAME TAG](https://www.gbfans.com/shop/gb1-name-tag-patch)!!! and No Ghost logo (Etsy) ![image](https://discdn.gbfans.com/original/1X/397d6ee216d0b09928814ccc829c7f2fdbd8f20e.gif) and Spongface’s awesome [belt gizmo](https://www.gbfans.com/wiki/equipment/uniform/calculator-circuit-board) kit ![image](https://discdn.gbfans.com/original/1X/397d6ee216d0b09928814ccc829c7f2fdbd8f20e.gif) So I am waiting on the Boots to ship as well as Wharin’s leather fobs, gizmo, and walky holsters. The MT500 is in the mail as are my Gloves and [leg hose](https://www.gbfans.com/wiki/equipment/uniform/yellow-hose) from GBFans. Waiting on Crix to ship the [leg hose connector](https://www.gbfans.com/wiki/uncategorized/leg-hose-connector). SO lets get started on the Gizmo! Here is the main board (back side) in all her glory ![image](https://discdn.gbfans.com/original/1X/397d6ee216d0b09928814ccc829c7f2fdbd8f20e.gif) …and here is the board with all of the basic kit resistors and all laid out ![image](https://discdn.gbfans.com/original/1X/397d6ee216d0b09928814ccc829c7f2fdbd8f20e.gif) Firs resistors soldered in place ![image](https://discdn.gbfans.com/original/1X/397d6ee216d0b09928814ccc829c7f2fdbd8f20e.gif) These are the stand up resistors after I bent the leads and put on the heat shrink ![image](https://discdn.gbfans.com/original/1X/397d6ee216d0b09928814ccc829c7f2fdbd8f20e.gif) Both colors of stand ups soldered in 🙂 ![image](https://discdn.gbfans.com/original/1X/397d6ee216d0b09928814ccc829c7f2fdbd8f20e.gif) Some of the other parts soldered in now ![image](https://discdn.gbfans.com/original/1X/397d6ee216d0b09928814ccc829c7f2fdbd8f20e.gif) Ceramic disks soldered in ![image](https://discdn.gbfans.com/original/1X/397d6ee216d0b09928814ccc829c7f2fdbd8f20e.gif) IC leads in place. I had issues with after I put on the last leads I couldn’t get the black pastil pieces out… so I just filed them flush. ![image](https://discdn.gbfans.com/original/1X/397d6ee216d0b09928814ccc829c7f2fdbd8f20e.gif) Rest of the IC’s installed with dry-rubs and stickers placed. I screwed up the on all the way on the left… oh well ![image](https://discdn.gbfans.com/original/1X/397d6ee216d0b09928814ccc829c7f2fdbd8f20e.gif) …and finally most of the LED kit circuitry installed. ![image](https://discdn.gbfans.com/original/1X/397d6ee216d0b09928814ccc829c7f2fdbd8f20e.gif) So I will probably be working on the LEDs and the Nixie tubes tonight for a little bit, but we will see. So far this kit is AMAZING, and directions couldn’t be simpler. Slowly but surely! ---
**Author:** ![PssdffJay](https://forum.gbfans.com/user_avatar/forum.gbfans.com/pssdffjay/32/6529_2.png) [@PssdffJay](https://forum.gbfans.com/u/PssdffJay)\ **Post date:** [March 15, 2014, 8:04pm UTC](https://forum.gbfans.com/t/first-uniform-build/13915/10 "2014-03-15T20:04:17Z")
Great work on everything so far! Doesn’t your wife understand how import all this is?? ---
**Author:** ![thebigone2087](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/d6d6ee/32.png) [@thebigone2087](https://forum.gbfans.com/u/thebigone2087)\ **Post date:** [March 15, 2014, 8:06pm UTC](https://forum.gbfans.com/t/first-uniform-build/13915/11 "2014-03-15T20:06:43Z")
> [@PssdffJay](#): > > Great work on everything so far! > > Doesn’t your wife understand how import all this is?? Haha, I try and make her understand… its hopeless. Everytime she’s asks me for something I think is slightly expensive I reply with, “well… can I build another pack?” It never goes over well… ---
**Author:** ![thebigone2087](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/d6d6ee/32.png) [@thebigone2087](https://forum.gbfans.com/u/thebigone2087)\ **Post date:** [March 16, 2014, 3:35am UTC](https://forum.gbfans.com/t/first-uniform-build/13915/12 "2014-03-16T03:35:30Z")
So I got a bit more done tonight. I got all the Nixie tubes installed with the LEDs, it was no simple task and was a bit time consuming but I got them all done! ![image](http://www.gbfans.com/images/pb/thebigone2087/E8CB6EBC-0108-4B01-8AB2-145F70A8BBDB_zpsd7xszjws.jpg) And here it is all lot up! Yes… I know the one LED is out, and I don’t know why as it is all wired as it should. Oh well, I’ll take another look and see if I can figure it out. I also have the shelf installed which I think I’ll keep raw. ![image](http://www.gbfans.com/images/pb/thebigone2087/B61BE281-A198-4FCC-92C3-D51142CA2A85_zpssyo9tokc.jpg) Daughter board is next! ---
**Author:** ![PssdffJay](https://forum.gbfans.com/user_avatar/forum.gbfans.com/pssdffjay/32/6529_2.png) [@PssdffJay](https://forum.gbfans.com/u/PssdffJay)\ **Post date:** [March 16, 2014, 4:00am UTC](https://forum.gbfans.com/t/first-uniform-build/13915/13 "2014-03-16T04:00:57Z")
Positive and negative in the right spots? Maybe it’s just a dud led. Don’t quote me, but I think you can test an LED with a button cell battery without blowing it, but don’t quote me. ---
**Author:** ![Wharin](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/w/49beb7/32.png) [@Wharin](https://forum.gbfans.com/u/Wharin)\ **Post date:** [March 16, 2014, 6:32am UTC](https://forum.gbfans.com/t/first-uniform-build/13915/14 "2014-03-16T06:32:22Z")
> [@PssdffJay](#): > > Positive and negative in the right spots? Maybe it’s just a dud led. Don’t quote me, but I think you can test an LED with a button cell battery without blowing it, but don’t quote me. With a regular led yes, but these come with a resistor installed to step down the 9v . Check and make sure the led is installed per polarity. ---
**Author:** ![thebigone2087](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/d6d6ee/32.png) [@thebigone2087](https://forum.gbfans.com/u/thebigone2087)\ **Post date:** [March 16, 2014, 4:01pm UTC](https://forum.gbfans.com/t/first-uniform-build/13915/15 "2014-03-16T16:01:16Z")
So it APPEARS that i severed one of the LED leads while cutting back some of the heat shrink… LAME. I am going to get ahold of Spongface and see if I can get a replacement. ---
**Author:** ![PssdffJay](https://forum.gbfans.com/user_avatar/forum.gbfans.com/pssdffjay/32/6529_2.png) [@PssdffJay](https://forum.gbfans.com/u/PssdffJay)\ **Post date:** [March 16, 2014, 8:22pm UTC](https://forum.gbfans.com/t/first-uniform-build/13915/16 "2014-03-16T20:22:38Z")
Bummer. No way to reattach? ---
**Author:** ![thebigone2087](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/d6d6ee/32.png) [@thebigone2087](https://forum.gbfans.com/u/thebigone2087)\ **Post date:** [March 16, 2014, 8:34pm UTC](https://forum.gbfans.com/t/first-uniform-build/13915/17 "2014-03-16T20:34:52Z")
Doesn’t look like it. I’ll take a closet look when I get home. ---
**Author:** ![thebigone2087](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/d6d6ee/32.png) [@thebigone2087](https://forum.gbfans.com/u/thebigone2087)\ **Post date:** [March 18, 2014, 12:50am UTC](https://forum.gbfans.com/t/first-uniform-build/13915/18 "2014-03-18T00:50:41Z")
So I got a lot of good stuff in the mail today 🙂 I love it when this happens! First up is Crix’s standard [leg hose connector](https://www.gbfans.com/wiki/uncategorized/leg-hose-connector) in brown. Super clean cast, I love Crix’s resin stuff! I also got my MT500 from eBay. It’s the correct 3-knob variant as well as a short antenna also from ebay. Oddly enough, the seller sent me two radios (the other is a 2-knob variant). I gotta get a hold of him and see if that was intentional or not. If it was, I’ll end up selling the 2-knob variant. Lastly, I got my order from the GBFans shop with my gloves and [leg hose](https://www.gbfans.com/wiki/equipment/uniform/yellow-hose). I’ll get my gizmo finished tonight and post photos either late tonight or tomorrow. ---
**Author:** ![thebigone2087](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/d6d6ee/32.png) [@thebigone2087](https://forum.gbfans.com/u/thebigone2087)\ **Post date:** [March 18, 2014, 4:12am UTC](https://forum.gbfans.com/t/first-uniform-build/13915/19 "2014-03-18T04:12:37Z")
Ok, so I didn’t get my Gizmo 100% finished, but I did finish the daughterboard. ![image](http://i796.photobucket.com/albums/yy241/thebigone2087/5F38AA2D-B3E5-486E-8CBC-555D0881DB65_zpsttt95l40.jpg) ![image](http://i796.photobucket.com/albums/yy241/thebigone2087/60938FE8-064E-4C56-822A-94EC1B483268_zpsmec1zzkl.jpg) ![image](http://i796.photobucket.com/albums/yy241/thebigone2087/D718736C-3C10-42E0-BDA0-3D0F6F6F6AF9_zps4aidiezb.jpg) I will get the error box attached tomorrow as well as the ‘pillow looking’ piece, and get the DB attached to the main gizmo. ---
**Author:** ![PssdffJay](https://forum.gbfans.com/user_avatar/forum.gbfans.com/pssdffjay/32/6529_2.png) [@PssdffJay](https://forum.gbfans.com/u/PssdffJay)\ **Post date:** [March 18, 2014, 4:18am UTC](https://forum.gbfans.com/t/first-uniform-build/13915/20 "2014-03-18T04:18:20Z")
Did you figure out if you can save the LED? One thing I did was use a dab of hot glue on the back to secure the 9volt connector wires so that I didn’t accidentally break them or rip them out changing the battery. I glued it off to the left side close to the edge out of the way, not on the spot that they connected to the board. Does that make sense? [Next page](https://forum.gbfans.com/t/first-uniform-build/13915.md?page=2)