# FS: RTV Steel Bumpers - Misc Parts

**URL:** <https://forum.gbfans.com/t/fs-rtv-steel-bumpers-misc-parts/38221>\
**Category:** For Sale\
**Created:** [February 1, 2023, 2:36am UTC](https://forum.gbfans.com/t/fs-rtv-steel-bumpers-misc-parts/38221 "2023-02-01T02:36:51Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![cworthdynamics](https://forum.gbfans.com/user_avatar/forum.gbfans.com/cworthdynamics/32/186072_2.png) [@cworthdynamics](https://forum.gbfans.com/u/cworthdynamics)\
**Post date:** [February 1, 2023, 2:36am UTC](https://forum.gbfans.com/t/fs-rtv-steel-bumpers-misc-parts/38221/1 "2023-02-01T02:36:51Z")

</div>

Sean Charlesworth

Oakland, CA

I have steel RTV bumpers for sale, as well as a few other RTV parts in my shop:

[https://charlesworthdynamics.etsy.com](https://charlesworthdynamics.etsy.com)

**RTV Steel Bumper** - I did a small run of steel bumpers for the RTV to gauge interest. If these sell quickly I will make more.

- Unpainted steel

- Holes and bends sized for movie-accurate Traxxas Stampede 4x4 base

- See shop listing for full info

**$24**

[![image](https://discdn.gbfans.com/original/3X/1/d/1dd95b155592a743eb9c96e86e3beb55df9db15d.jpeg)](https://imgur.com/LYuhzEL)

[![image](https://discdn.gbfans.com/original/3X/8/9/8930b852a0770796301a0a7679e263b013190b1c.jpeg)](https://imgur.com/hWQJ81v)

[![image](https://discdn.gbfans.com/original/3X/5/f/5f6a1cf6d47eb42900ae003a9d5e70f9d9c18447.jpeg)](https://imgur.com/9AKMS4J)

[![image](https://discdn.gbfans.com/original/3X/b/0/b0a8eb4f45bc9343e41a928fd0fec4e24c34c10c.jpeg)](https://imgur.com/bd3GbjX)

**RTV Rear Connector with mounting hardware $24**

[![image](https://discdn.gbfans.com/original/3X/9/3/93e434d87789b01b9664d7e962105705520853d8.jpeg)](https://imgur.com/FPA8YGw)

[![image](https://discdn.gbfans.com/original/3X/0/c/0ce83da0e32202c98b8df9fbbcf491a1409dc21e.jpeg)](https://imgur.com/5NeHwas)

**RTV Transmitter Whip Antenna $11**

Black whip antenna modded to match screen-used version - install with hot glue or epoxy.

[![image](https://discdn.gbfans.com/original/3X/0/a/0a09b6ec581d22f8508a9b95f5575d1f30fdc92c.jpeg)](https://imgur.com/O2rVWZP)

[![image](https://discdn.gbfans.com/original/3X/3/f/3fe1f5b7dc80af40098207137d216564fa3319c4.jpeg)](https://imgur.com/JtwEzzJ)

[![image](https://discdn.gbfans.com/original/3X/c/c/cc50dda9af65e771319f5a383915cd6e2982932d.jpeg)](https://imgur.com/viF42uO)

**I also released free 3D files for some of the RTV greeblies:**

> **[Ghostbusters RTV Parts by countspatula](https://www.thingiverse.com/thing:5635113)**
>
> As of 2026 all my files have been moved to Printables - find me there - https://www.printables.com/@CwthDynamics\_4181414 Here are a few parts for the Ghostbusters Afterlife RTV (Remote Trap Vehicle). For additional parts see my full Ghost Trap -...

**Antenna Swivel**

[![image](https://discdn.gbfans.com/original/3X/c/8/c846ec4f449a488ee2459d6069b6eb65a2d612c2.jpeg)](https://imgur.com/UdMBWuj)

**Steering Arm**

[![image](https://discdn.gbfans.com/original/3X/9/7/97e408374c55e8aa9f3ba71256b348adc83d4509.jpeg)](https://imgur.com/AKfbtI4)

**Transmitter Ribbon Connector**

[![image](https://discdn.gbfans.com/original/3X/2/c/2cc8914ef4593b70d371837364c5275c7c04caf6.jpeg)](https://imgur.com/lTDEZug)

[![image](https://discdn.gbfans.com/original/3X/b/0/b065868889d30a688f0e027cddcaea5ab9398881.jpeg)](https://imgur.com/XJZXozP)

---

<div class="post-metadata">

**Author:** ![mercifull](https://forum.gbfans.com/user_avatar/forum.gbfans.com/mercifull/32/4051_2.png) [@mercifull](https://forum.gbfans.com/u/mercifull)\
**Post date:** [May 22, 2023, 12:36pm UTC](https://forum.gbfans.com/t/fs-rtv-steel-bumpers-misc-parts/38221/2 "2023-05-22T12:36:18Z")

</div>

sorry to bump this thread but I’m looking at your 3d printed greeblies and i can see the square-ish front bump but what about the long skinny ones, is it just scaled to fit? also the ribbon connector for the rear, is the one on the side the same? did you just cut/dremel it out? thnks.

---

<div class="post-metadata">

**Author:** ![cworthdynamics](https://forum.gbfans.com/user_avatar/forum.gbfans.com/cworthdynamics/32/186072_2.png) [@cworthdynamics](https://forum.gbfans.com/u/cworthdynamics)\
**Post date:** [May 22, 2023, 5:21pm UTC](https://forum.gbfans.com/t/fs-rtv-steel-bumpers-misc-parts/38221/3 "2023-05-22T17:21:29Z")

</div>

The long skinny ones are part of the original transmitter so I didn’t model those. Yes - ribbon connectors are the same - there is a hole cut in the side panel.

---

<div class="post-metadata">

**Author:** ![mercifull](https://forum.gbfans.com/user_avatar/forum.gbfans.com/mercifull/32/4051_2.png) [@mercifull](https://forum.gbfans.com/u/mercifull)\
**Post date:** [May 22, 2023, 8:05pm UTC](https://forum.gbfans.com/t/fs-rtv-steel-bumpers-misc-parts/38221/4 "2023-05-22T20:05:53Z")

</div>

Ahh. On mine (which is a close but not exact model) I’ve got more of the knob slider thingies. Can you let me know the dimensions and I’ll just scale the other one to fit. Thanks.