# Fully 3D printed Proton Pack **URL:** \ **Category:** Proton Packs\ **Created:** [December 21, 2014, 4:34am UTC](https://forum.gbfans.com/t/fully-3d-printed-proton-pack/22114 "2014-12-21T04:34:42Z")\ **Posts on this page:** 20\ **Page:** 2
**Author:** ![fedebat](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/f/e480ec/32.png) [@fedebat](https://forum.gbfans.com/u/fedebat)\ **Post date:** [December 27, 2014, 9:46am UTC](https://forum.gbfans.com/t/fully-3d-printed-proton-pack/22114/21 "2014-12-27T09:46:40Z")
Great Job! šŸ™‚ ---
**Author:** ![rahum](https://forum.gbfans.com/user_avatar/forum.gbfans.com/rahum/32/5946_2.png) [@rahum](https://forum.gbfans.com/u/rahum)\ **Post date:** [December 27, 2014, 1:28pm UTC](https://forum.gbfans.com/t/fully-3d-printed-proton-pack/22114/22 "2014-12-27T13:28:20Z")
Looks incredible. What 3D printer are you using? ---
**Author:** ![raktageno](https://forum.gbfans.com/user_avatar/forum.gbfans.com/raktageno/32/186341_2.png) [@raktageno](https://forum.gbfans.com/u/raktageno)\ **Post date:** [December 27, 2014, 1:51pm UTC](https://forum.gbfans.com/t/fully-3d-printed-proton-pack/22114/23 "2014-12-27T13:51:02Z")
It seems right to ask who is going to start 3d printing packs, and where does the line start? ---
**Author:** ![tommyb345](https://forum.gbfans.com/user_avatar/forum.gbfans.com/tommyb345/32/4039_2.png) [@tommyb345](https://forum.gbfans.com/u/tommyb345)\ **Post date:** [December 27, 2014, 3:03pm UTC](https://forum.gbfans.com/t/fully-3d-printed-proton-pack/22114/24 "2014-12-27T15:03:54Z")
> [@rahum](#): > > Looks incredible. > > What 3D printer are you using? Makerbot rep 2 ---
**Author:** ![lunchbox739](https://forum.gbfans.com/user_avatar/forum.gbfans.com/lunchbox739/32/6450_2.png) [@lunchbox739](https://forum.gbfans.com/u/lunchbox739)\ **Post date:** [December 27, 2014, 3:43pm UTC](https://forum.gbfans.com/t/fully-3d-printed-proton-pack/22114/25 "2014-12-27T15:43:19Z")
This is fine work. However I think its still a little early for folks to start wanting mass produced 3D packs. As good as this looks I still weep for the many hours that will be spent smoothing all the striations out. At the end of the dayā€¦technology just hasnā€™t caught up to good ole fashioned hand laid fiberglass yet. Excellent work though sirā€¦let me say that againā€¦I think you pack will turn out great once the project is completed. ---
**Author:** ![tommyb345](https://forum.gbfans.com/user_avatar/forum.gbfans.com/tommyb345/32/4039_2.png) [@tommyb345](https://forum.gbfans.com/u/tommyb345)\ **Post date:** [December 27, 2014, 3:44pm UTC](https://forum.gbfans.com/t/fully-3d-printed-proton-pack/22114/26 "2014-12-27T15:44:10Z")
Thanks! ---
**Author:** ![Porturtle](https://forum.gbfans.com/user_avatar/forum.gbfans.com/porturtle/32/4009_2.png) [@Porturtle](https://forum.gbfans.com/u/Porturtle)\ **Post date:** [December 27, 2014, 10:39pm UTC](https://forum.gbfans.com/t/fully-3d-printed-proton-pack/22114/27 "2014-12-27T22:39:02Z")
> [@tommyb345](#): > > Credit to the design of the parts goes to Tony Goacher. And you can search for him on [Thingiverse.com](http://Thingiverse.com) and find all the files there. šŸ˜‰ Awesome thanks! ---
**Author:** ![berk](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/b/7993a0/32.png) [@berk](https://forum.gbfans.com/u/berk)\ **Post date:** [December 27, 2014, 11:10pm UTC](https://forum.gbfans.com/t/fully-3d-printed-proton-pack/22114/28 "2014-12-27T23:10:48Z")
Iā€™d just like to thank tommyb345 for helping me with this project. Would not have been possible without his suggestions/criticisms/pedantry. Great workā€¦and really ā– ā– ā– ā– ā– ā–  that you completed yours before I did! TG ---
**Author:** ![tommyb345](https://forum.gbfans.com/user_avatar/forum.gbfans.com/tommyb345/32/4039_2.png) [@tommyb345](https://forum.gbfans.com/u/tommyb345)\ **Post date:** [December 27, 2014, 11:15pm UTC](https://forum.gbfans.com/t/fully-3d-printed-proton-pack/22114/29 "2014-12-27T23:15:20Z")
> [@berk](#): > > Iā€™d just like to thank tommyb345 for helping me with this project. Would not have been possible without his suggestions/criticisms/pedantry. Great workā€¦and really ā– ā– ā– ā– ā– ā–  that you completed yours before I did! > > TG Thanks buddy, same to you. This project has been totally ā€œPantsā€! ---
**Author:** ![necrosapien87](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/n/c37758/32.png) [@necrosapien87](https://forum.gbfans.com/u/necrosapien87)\ **Post date:** [December 28, 2014, 11:27pm UTC](https://forum.gbfans.com/t/fully-3d-printed-proton-pack/22114/30 "2014-12-28T23:27:52Z")
What printer do you use? ---
**Author:** ![tommyb345](https://forum.gbfans.com/user_avatar/forum.gbfans.com/tommyb345/32/4039_2.png) [@tommyb345](https://forum.gbfans.com/u/tommyb345)\ **Post date:** [December 28, 2014, 11:35pm UTC](https://forum.gbfans.com/t/fully-3d-printed-proton-pack/22114/31 "2014-12-28T23:35:52Z")
> [@necrosapien87](#): > > What printer do you use? Makerbot rep 2 but itā€™s my first printer and Iā€™ve learned much since from using it. Thereā€™s so many great kits you can buy to make your own printer for much cheaper. ---
**Author:** ![berk](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/b/7993a0/32.png) [@berk](https://forum.gbfans.com/u/berk)\ **Post date:** [December 29, 2014, 12:27am UTC](https://forum.gbfans.com/t/fully-3d-printed-proton-pack/22114/32 "2014-12-29T00:27:42Z")
I use a Mendel90 [Mendel90 - RepRap](http://reprap.org/wiki/Mendel90), tommyb345 uses a Makerbot [http://www.makerbot.com/](http://www.makerbot.com/) ---
**Author:** ![Riggs45](https://forum.gbfans.com/user_avatar/forum.gbfans.com/riggs45/32/6571_2.png) [@Riggs45](https://forum.gbfans.com/u/Riggs45)\ **Post date:** [December 30, 2014, 6:39am UTC](https://forum.gbfans.com/t/fully-3d-printed-proton-pack/22114/33 "2014-12-30T06:39:42Z")
Hashtag gamechanger. ---
**Author:** ![tommyb345](https://forum.gbfans.com/user_avatar/forum.gbfans.com/tommyb345/32/4039_2.png) [@tommyb345](https://forum.gbfans.com/u/tommyb345)\ **Post date:** [December 31, 2014, 8:23am UTC](https://forum.gbfans.com/t/fully-3d-printed-proton-pack/22114/34 "2014-12-31T08:23:01Z")
Progress pic ---
**Author:** ![tommyb345](https://forum.gbfans.com/user_avatar/forum.gbfans.com/tommyb345/32/4039_2.png) [@tommyb345](https://forum.gbfans.com/u/tommyb345)\ **Post date:** [December 31, 2014, 10:41am UTC](https://forum.gbfans.com/t/fully-3d-printed-proton-pack/22114/35 "2014-12-31T10:41:43Z")
Fully 3D printed [proton pack](https://www.gbfans.com/wiki/equipment/proton-pack) [Ribbon cable](https://www.gbfans.com/wiki/equipment/proton-pack/ribbon-cable), clamps, sync gen, [cyclotron](https://www.gbfans.com/wiki/equipment/proton-pack/cyclotron), and [bumper](https://www.gbfans.com/wiki/equipment/proton-pack/bumper) installed. And red and blue acrylic lenses installed. ---
**Author:** ![EctoPrimer](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/a87d85/32.png) [@EctoPrimer](https://forum.gbfans.com/u/EctoPrimer)\ **Post date:** [December 31, 2014, 3:20pm UTC](https://forum.gbfans.com/t/fully-3d-printed-proton-pack/22114/36 "2014-12-31T15:20:46Z")
You are convincing me to pick up a printer. Some work to do, but nice ---
**Author:** ![necrosapien87](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/n/c37758/32.png) [@necrosapien87](https://forum.gbfans.com/u/necrosapien87)\ **Post date:** [January 1, 2015, 8:33am UTC](https://forum.gbfans.com/t/fully-3d-printed-proton-pack/22114/37 "2015-01-01T08:33:10Z")
How much of the pack is 3d printed. Percentage wise? ---
**Author:** ![tommyb345](https://forum.gbfans.com/user_avatar/forum.gbfans.com/tommyb345/32/4039_2.png) [@tommyb345](https://forum.gbfans.com/u/tommyb345)\ **Post date:** [January 1, 2015, 2:56pm UTC](https://forum.gbfans.com/t/fully-3d-printed-proton-pack/22114/38 "2015-01-01T14:56:39Z")
Of course itā€™s not 100% printed. I needed it to be sturdy enough to wear time and again. The Mobo is MDF Wood Screws and socket head screws The clippard fittings, tubes, [ribbon cable](https://www.gbfans.com/wiki/equipment/proton-pack/ribbon-cable) and clamps. The pvc on the thrower Acyclic tube Alice frame and straps And lastly the [V-hook](https://www.gbfans.com/wiki/equipment/proton-pack/v-hook) Other than that itā€™s all printed. šŸ™‚ So really 85% printed? Estimated ---
**Author:** ![tommyb345](https://forum.gbfans.com/user_avatar/forum.gbfans.com/tommyb345/32/4039_2.png) [@tommyb345](https://forum.gbfans.com/u/tommyb345)\ **Post date:** [January 1, 2015, 7:30pm UTC](https://forum.gbfans.com/t/fully-3d-printed-proton-pack/22114/39 "2015-01-01T19:30:16Z")
Fully 3D printed [proton pack](https://www.gbfans.com/wiki/equipment/proton-pack) Decals applied Still waiting on the 2 straight clippard fittings to arrive that go next to the PPD ---
**Author:** ![berk](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/b/7993a0/32.png) [@berk](https://forum.gbfans.com/u/berk)\ **Post date:** [January 3, 2015, 9:54pm UTC](https://forum.gbfans.com/t/fully-3d-printed-proton-pack/22114/40 "2015-01-03T21:54:23Z")
Mine is not as complete as tommyb345ā€™s but Iā€™m getting there. The only none 3D print parts are the MB and the thrower barrels. ![image](http://www.imagesup.net/?di=2142032202113) [Previous page](https://forum.gbfans.com/t/fully-3d-printed-proton-pack/22114.md?page=1) [Next page](https://forum.gbfans.com/t/fully-3d-printed-proton-pack/22114.md?page=3)