# Funkzilla Trap.

**URL:** <https://forum.gbfans.com/t/funkzilla-trap/6009>\
**Category:** Ghost Traps\
**Created:** [January 9, 2008, 6:51am UTC](https://forum.gbfans.com/t/funkzilla-trap/6009 "2008-01-09T06:51:16Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Funkzilla](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/f/8491ac/32.png) [@Funkzilla](https://forum.gbfans.com/u/Funkzilla)\
**Post date:** [January 9, 2008, 6:51am UTC](https://forum.gbfans.com/t/funkzilla-trap/6009/1 "2008-01-09T06:51:16Z")

</div>

I’ve been posting pics of my work all night. So, I figured why not post my latest trap here too?

After building my last two traps (seen here at the bottom of the page)

[http://www.ericboyer.net/props/finished](http://www.ericboyer.net/props/finished)

Everyone jumped on me for not making moulds of them before I “finished” (they’re still not _really_ done) them up.

So, I finally got around to “correcting” this and actually took castings out of the new moulds today. This is actually the fourth trap I’ve built. So, I guess you can say I’m well practiced.

Unfortunately I’ve got no pics of the actual build up ☹ same story as what went down in the [giga meter](https://www.gbfans.com/wiki/equipment/giga-meter) thread :x

> **[Scrubber N Buffer to Giga Meter](https://forum.gbfans.com/viewtopic.php?f=34&t=4639)**
>
> Hey guys, Since there isn’t much in this section I figured I’d present my little adventure into the world of the Giga Meter. Way back in like June, ProtoKev, sent me his Scrubber N’ Buffer that he’d won on e-bay quite a while back. I finally got...

Here’s some pics of the master and some of the first castings:

Not much else to add…so thanks for looking 😁

-Eric

---

<div class="post-metadata">

**Author:** ![Not404Error](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/n/ecb155/32.png) [@Not404Error](https://forum.gbfans.com/u/Not404Error)\
**Post date:** [January 9, 2008, 4:38pm UTC](https://forum.gbfans.com/t/funkzilla-trap/6009/2 "2008-01-09T16:38:42Z")

</div>

God DAMN is that thing spiffy. Nice work man!

---

<div class="post-metadata">

**Author:** ![Funkzilla](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/f/8491ac/32.png) [@Funkzilla](https://forum.gbfans.com/u/Funkzilla)\
**Post date:** [January 9, 2008, 5:40pm UTC](https://forum.gbfans.com/t/funkzilla-trap/6009/3 "2008-01-09T17:40:13Z")

</div>

> [@Not404Error](#):
>
> God DAMN is that thing spiffy. Nice work man!

Thanks! Spiffy is always good.

-Eric

---

<div class="post-metadata">

**Author:** ![loly2kn2](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/l/51bf81/32.png) [@loly2kn2](https://forum.gbfans.com/u/loly2kn2)\
**Post date:** [January 9, 2008, 7:04pm UTC](https://forum.gbfans.com/t/funkzilla-trap/6009/4 "2008-01-09T19:04:50Z")

</div>

Nice trap Funk! Looks great! What did ya make it from initially?

Lawrence

---

<div class="post-metadata">

**Author:** ![Funkzilla](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/f/8491ac/32.png) [@Funkzilla](https://forum.gbfans.com/u/Funkzilla)\
**Post date:** [January 9, 2008, 7:16pm UTC](https://forum.gbfans.com/t/funkzilla-trap/6009/5 "2008-01-09T19:16:06Z")

</div>

MDF (medium density fiberboard) - fast, cheap, and easy to work with.

The only set back was having to use _fair_ bit (not a ton) of spray paint to seal off the wood and then use steel wool to give it a smooth surface. This is opposed to styrene, which is what I usually work with, which already has a perfect surface but is far more expensive.

-Eric

---

<div class="post-metadata">

**Author:** ![CAZAFANTASMA](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/c/a6a055/32.png) [@CAZAFANTASMA](https://forum.gbfans.com/u/CAZAFANTASMA)\
**Post date:** [January 31, 2008, 7:28pm UTC](https://forum.gbfans.com/t/funkzilla-trap/6009/6 "2008-01-31T19:28:53Z")

</div>

You had me at hello!!!