# GB2 gray suit dye receipe (Tru-Spec Only) **URL:** \ **Category:** Uniforms\ **Created:** [December 21, 2008, 3:04am UTC](https://forum.gbfans.com/t/gb2-gray-suit-dye-receipe-tru-spec-only/11146 "2008-12-21T03:04:29Z")\ **Posts on this page:** 15\ **Page:** 1
**Author:** ![azspidey](https://forum.gbfans.com/user_avatar/forum.gbfans.com/azspidey/32/186112_2.png) [@azspidey](https://forum.gbfans.com/u/azspidey)\ **Post date:** [December 21, 2008, 3:04am UTC](https://forum.gbfans.com/t/gb2-gray-suit-dye-receipe-tru-spec-only/11146/1 "2008-12-21T03:04:29Z")
I see on here different receipes for the rothco suits for the dark gray, but never for the Tru-Spec suits. A lot of people I suppose are affraid because the Tru-Spec suit is 65% poly and 35% cotton. Well I managed to pull it off, here are some pictures of how it came out. ![image](http://www.gbfans.com/images/pb/supra_clipse/suit1.jpg) ![image](http://www.gbfans.com/images/pb/supra_clipse/suit3.jpg) And in different lighting. ![image](http://www.gbfans.com/images/pb/supra_clipse/suit2.jpg) Here is how I did it: I color stripped a black suit with two boxes of color remover for 1 1/2 hours in the small load in the washer (hot water). Then in a small load again (about 11 gallons in my washer) I mixed one powdered package of black and one package of royal blue and a cup of salt. (hot water) I wet down the suit and put it in the wash for about 5-7 minutes. Then I took it out, rinsed the extra color out in the bath tub, and that is the color I ended up with. The next day I did wash it in cold water with no soap, and the color didnt change. The color in the pictures are accurate to the color in real life. Good luck everyone!!! ---
**Author:** ![thor2015](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/3be4f8/32.png) [@thor2015](https://forum.gbfans.com/u/thor2015)\ **Post date:** [December 23, 2008, 6:34pm UTC](https://forum.gbfans.com/t/gb2-gray-suit-dye-receipe-tru-spec-only/11146/2 "2008-12-23T18:34:45Z")
Nice work! That’s about the color gray that I got with the Rothco suit but of course the quality of the Rothco is often frowned upon by others. At least we know it can also be done with the Tru-Spec suits. Once again, great job and nice write up! ---
**Author:** ![loly2kn2](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/l/51bf81/32.png) [@loly2kn2](https://forum.gbfans.com/u/loly2kn2)\ **Post date:** [December 23, 2008, 6:59pm UTC](https://forum.gbfans.com/t/gb2-gray-suit-dye-receipe-tru-spec-only/11146/3 "2008-12-23T18:59:12Z")
Great job on this!! looks well good Lawrence ---
**Author:** ![Krenzy](https://forum.gbfans.com/user_avatar/forum.gbfans.com/krenzy/32/5873_2.png) [@Krenzy](https://forum.gbfans.com/u/Krenzy)\ **Post date:** [December 23, 2008, 7:03pm UTC](https://forum.gbfans.com/t/gb2-gray-suit-dye-receipe-tru-spec-only/11146/4 "2008-12-23T19:03:50Z")
Quick question: did it dye the interior of your washing machine? I want to do the same wiht my GB1 color, but I don’t want to ruin my washer…or next load of laundry. ---
**Author:** ![azspidey](https://forum.gbfans.com/user_avatar/forum.gbfans.com/azspidey/32/186112_2.png) [@azspidey](https://forum.gbfans.com/u/azspidey)\ **Post date:** [December 23, 2008, 7:18pm UTC](https://forum.gbfans.com/t/gb2-gray-suit-dye-receipe-tru-spec-only/11146/5 "2008-12-23T19:18:28Z")
I have dyed many items in my washer without it ever staining the washer. I usually run it once empty after I dye something just to make sure there is none left that could get on my clothes. ---
**Author:** ![JackIvyGB](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/j/958977/32.png) [@JackIvyGB](https://forum.gbfans.com/u/JackIvyGB)\ **Post date:** [December 23, 2008, 7:23pm UTC](https://forum.gbfans.com/t/gb2-gray-suit-dye-receipe-tru-spec-only/11146/6 "2008-12-23T19:23:37Z")
That looks awesome man! Well done! ---
**Author:** ![loly2kn2](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/l/51bf81/32.png) [@loly2kn2](https://forum.gbfans.com/u/loly2kn2)\ **Post date:** [December 23, 2008, 7:53pm UTC](https://forum.gbfans.com/t/gb2-gray-suit-dye-receipe-tru-spec-only/11146/7 "2008-12-23T19:53:44Z")
> [@Krenzy](#): > > Quick question: did it dye the interior of your washing machine? I want to do the same wiht my GB1 color, but I don’t want to ruin my washer…or next load of laundry. Some dyes I’ve seen are for front load washing machines only. So if you ave a toploader you should always check if its ok to use as well. Lawrence ---
**Author:** ![azspidey](https://forum.gbfans.com/user_avatar/forum.gbfans.com/azspidey/32/186112_2.png) [@azspidey](https://forum.gbfans.com/u/azspidey)\ **Post date:** [December 23, 2008, 8:15pm UTC](https://forum.gbfans.com/t/gb2-gray-suit-dye-receipe-tru-spec-only/11146/8 "2008-12-23T20:15:49Z")
Yeah mine is a top loader washer. ---
**Author:** ![Zack](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/z/f6c823/32.png) [@Zack](https://forum.gbfans.com/u/Zack)\ **Post date:** [December 23, 2008, 9:12pm UTC](https://forum.gbfans.com/t/gb2-gray-suit-dye-receipe-tru-spec-only/11146/9 "2008-12-23T21:12:18Z")
I don’t know about other dyes, but yeah you’re right, the package of RIT dye gives instructions on how to run a load of hot water and bleach after to avoid staining. I don’t even think the plastic parts or anything was tinted as long as you do it right after. On topic, the color looks great! I finally got a Lifegard as well. I had no idea how loud that damn thing was lol :o ---
**Author:** ![Crix](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/c/258eb7/32.png) [@Crix](https://forum.gbfans.com/u/Crix)\ **Post date:** [December 24, 2008, 6:12pm UTC](https://forum.gbfans.com/t/gb2-gray-suit-dye-receipe-tru-spec-only/11146/10 "2008-12-24T18:12:30Z")
> [@Zack](#): > > On topic, the color looks great! I finally got a Lifegard as well. I had no idea how loud that damn thing was lol :o Yeah, kind of painful, eh? :mrgreen: ---
**Author:** ![Man\_of\_Film](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/m/f9ae1b/32.png) [@Man\_of\_Film](https://forum.gbfans.com/u/Man_of_Film)\ **Post date:** [January 29, 2011, 6:34pm UTC](https://forum.gbfans.com/t/gb2-gray-suit-dye-receipe-tru-spec-only/11146/11 "2011-01-29T18:34:19Z")
Would your process also work if I just used a plastic bin instead of a washer or would it better to do it in the washing machine? Thanks ---
**Author:** ![rafj27](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/r/b9bd4f/32.png) [@rafj27](https://forum.gbfans.com/u/rafj27)\ **Post date:** [January 29, 2011, 6:40pm UTC](https://forum.gbfans.com/t/gb2-gray-suit-dye-receipe-tru-spec-only/11146/12 "2011-01-29T18:40:32Z")
i may have to try this… ---
**Author:** ![Man\_of\_Film](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/m/f9ae1b/32.png) [@Man\_of\_Film](https://forum.gbfans.com/u/Man_of_Film)\ **Post date:** [January 30, 2011, 12:54am UTC](https://forum.gbfans.com/t/gb2-gray-suit-dye-receipe-tru-spec-only/11146/13 "2011-01-30T00:54:40Z")
I followed the instructions to the T but my suit looks just as dark as when I started. I think i messed up during the color remover portion. Any advice or do you have any details about that step? Thanks ---
**Author:** ![xhearthrobx](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/x/b38774/32.png) [@xhearthrobx](https://forum.gbfans.com/u/xhearthrobx)\ **Post date:** [March 16, 2018, 5:41am UTC](https://forum.gbfans.com/t/gb2-gray-suit-dye-receipe-tru-spec-only/11146/14 "2018-03-16T05:41:42Z")
hey @AZspidey thanks for your method with the black tru-spec suit i followed the instructions you did and my suit came out great well i hope it did cause it seems charcoal grey to me but thanks cause i really didnt want to get a navy and do that long method but thanks for that ---
**Author:** ![Etigo](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/77aa72/32.png) [@Etigo](https://forum.gbfans.com/u/Etigo)\ **Post date:** [March 20, 2018, 11:57am UTC](https://forum.gbfans.com/t/gb2-gray-suit-dye-receipe-tru-spec-only/11146/15 "2018-03-20T11:57:59Z")
Wow, I think I’m gonna try this!!! 😃