# GBFans Ghost Trap Holster V-Hook question.

**URL:** <https://forum.gbfans.com/t/gbfans-ghost-trap-holster-v-hook-question/10921>\
**Category:** Ghost Traps\
**Created:** [February 15, 2020, 11:50pm UTC](https://forum.gbfans.com/t/gbfans-ghost-trap-holster-v-hook-question/10921 "2020-02-15T23:50:06Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![cristovalc](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/c/898d66/32.png) [@cristovalc](https://forum.gbfans.com/u/cristovalc)\
**Post date:** [February 15, 2020, 11:50pm UTC](https://forum.gbfans.com/t/gbfans-ghost-trap-holster-v-hook-question/10921/1 "2020-02-15T23:50:06Z")

</div>

Hey guys, I’m currently building a [Ghost Trap](https://www.gbfans.com/wiki/equipment/ghost-trap), but before I put it all together I’m wondering if you all could help me find the measurements for the placement of the screw holes for the [V-hook](https://www.gbfans.com/wiki/equipment/proton-pack/v-hook) on the underside of the trap? I won’t be getting the holster for another few months, but would like to pre-drill the holes so I don’t have to take it apart again and do so in the future. I’ll probably be buying the one available on the GBFans website, so if anyone is currently that model could you help a guy out? Thanks!

---

<div class="post-metadata">

**Author:** ![mike\_waclo](https://forum.gbfans.com/user_avatar/forum.gbfans.com/mike_waclo/32/12039_2.png) [@mike\_waclo](https://forum.gbfans.com/u/mike_waclo)\
**Post date:** [February 16, 2020, 1:15pm UTC](https://forum.gbfans.com/t/gbfans-ghost-trap-holster-v-hook-question/10921/2 "2020-02-16T13:15:17Z")

</div>

> [@cristovalc post\_id=4931142 time=1581810606 user\_id=52328](#):
>
> Hey guys, I’m currently building a Ghost Trap, but before I put it all together I’m wondering if you all could help me find the measurements for the placement of the screw holes for the V-hook on the underside of the trap? I won’t be getting the holster for another few months, but would like to pre-drill the holes so I don’t have to take it apart again and do so in the future. I’ll probably be buying the one available on the GBFans website, so if anyone is currently that model could you help a guy out? Thanks!

I just measured mine… The first hole is 1/2" from the edge of the back wheel truck, and the holes are 1" apart. I don’t know if that’s “screen accurate” but putting the hook as far back as possible gave me the most room ahead of it to hook it onto the plate on the uniform.

Can I ask what kit you’re building from? I built a Benofkent trap, and because of the height of the wheel trucks, I had to use a small square of acrylic as a standoff for the hook to allow it to reach the belt plate. If you’re running into that same issue, I can dig back through emails and find exactly where I got that acrylic from, and the exact thickness.

 ![image](https://discdn.gbfans.com/original/3X/6/f/6fbd570c1d9189ec373e32cd8511bce34db8c07f.jpeg)

---

<div class="post-metadata">

**Author:** ![cristovalc](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/c/898d66/32.png) [@cristovalc](https://forum.gbfans.com/u/cristovalc)\
**Post date:** [February 16, 2020, 9:08pm UTC](https://forum.gbfans.com/t/gbfans-ghost-trap-holster-v-hook-question/10921/3 "2020-02-16T21:08:34Z")

</div>

Awesome, thanks a bunch!

I’m building Sean Charlesworth’s trap, so not to sure what the differences are, but from looking at the photos I think the wheels recess a bit more into the bottom on his?

---

<div class="post-metadata">

**Author:** ![phatbeazie](https://forum.gbfans.com/user_avatar/forum.gbfans.com/phatbeazie/32/12784_2.png) [@phatbeazie](https://forum.gbfans.com/u/phatbeazie)\
**Post date:** [February 17, 2021, 3:54pm UTC](https://forum.gbfans.com/t/gbfans-ghost-trap-holster-v-hook-question/10921/4 "2021-02-17T15:54:09Z")

</div>

Mike, Can you tell me what thickness and where you sourced the hook extension standoff?

“I built a Benofkent trap, and because of the height of the wheel trucks, I had to use a small square of acrylic as a standoff for the hook to allow it to reach the belt plate. If you’re running into that same issue, I can dig back through emails and find exactly where I got that acrylic from, and the exact thickness.”

> [@mike\_waclo post\_id=4931150 time=1581858917 user\_id=46878](#):
>
> > [@cristovalc post\_id=4931142 time=1581810606 user\_id=52328](#):
> >
> > Hey guys, I’m currently building a Ghost Trap, but before I put it all together I’m wondering if you all could help me find the measurements for the placement of the screw holes for the V-hook on the underside of the trap? I won’t be getting the holster for another few months, but would like to pre-drill the holes so I don’t have to take it apart again and do so in the future. I’ll probably be buying the one available on the GBFans website, so if anyone is currently that model could you help a guy out? Thanks!
> 
> I just measured mine… The first hole is 1/2" from the edge of the back wheel truck, and the holes are 1" apart. I don’t know if that’s “screen accurate” but putting the hook as far back as possible gave me the most room ahead of it to hook it onto the plate on the uniform.
> 
> Can I ask what kit you’re building from?
> 
> ![image](https://discdn.gbfans.com/original/3X/6/f/6fbd570c1d9189ec373e32cd8511bce34db8c07f.jpeg)

---

<div class="post-metadata">

**Author:** ![imperialwalker](https://forum.gbfans.com/user_avatar/forum.gbfans.com/imperialwalker/32/188109_2.png) [@imperialwalker](https://forum.gbfans.com/u/imperialwalker)\
**Post date:** [February 17, 2021, 7:32pm UTC](https://forum.gbfans.com/t/gbfans-ghost-trap-holster-v-hook-question/10921/5 "2021-02-17T19:32:34Z")

</div>

When did you print your trap? The 3D files have the holes predrilled for the hook.

I suggest downloading the newest version and reprinting the bottom, but if that isn’t possible let me know and I will measure mine for you.

---

<div class="post-metadata">

**Author:** ![mike\_waclo](https://forum.gbfans.com/user_avatar/forum.gbfans.com/mike_waclo/32/12039_2.png) [@mike\_waclo](https://forum.gbfans.com/u/mike_waclo)\
**Post date:** [February 18, 2021, 11:25am UTC](https://forum.gbfans.com/t/gbfans-ghost-trap-holster-v-hook-question/10921/6 "2021-02-18T11:25:31Z")

</div>

> [@Phatbeazie post\_id=4946013 time=1613577249 user\_id=51597](#):
>
> Mike, Can you tell me what thickness and where you sourced the hook extension standoff?

Check your PMs… I replied to you with some details about what I ordered.

---

<div class="post-metadata">

**Author:** ![cristovalc](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/c/898d66/32.png) [@cristovalc](https://forum.gbfans.com/u/cristovalc)\
**Post date:** [February 19, 2021, 1:30am UTC](https://forum.gbfans.com/t/gbfans-ghost-trap-holster-v-hook-question/10921/7 "2021-02-19T01:30:45Z")

</div>

I got mine printed from Sean Charlesworth himself, since getting it 3D printed from anywhere around me would have been a little cost prohibitive (at the time anyway, lord knows how much money I sunk into this whole project in the end).

Those measurements ended up being perfect anyway, thanks! The clip sat a bit too low originally though, so I boosted it up with two squares cut from the spare leather I used on the holster, and screwed it on to that like a sort of padding. Worked like a charm!
