# GBFans Soundboard wiring question

**URL:** <https://forum.gbfans.com/t/gbfans-soundboard-wiring-question/3081>\
**Category:** Proton Packs\
**Created:** [November 15, 2019, 2:44pm UTC](https://forum.gbfans.com/t/gbfans-soundboard-wiring-question/3081 "2019-11-15T14:44:28Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![SpookyDaveG](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/s/ac91a4/32.png) [@SpookyDaveG](https://forum.gbfans.com/u/SpookyDaveG)\
**Post date:** [November 15, 2019, 2:44pm UTC](https://forum.gbfans.com/t/gbfans-soundboard-wiring-question/3081/1 "2019-11-15T14:44:28Z")

</div>

I have a technical question for owners of the GBFans Soundboard.

I have a Spirit Pack that I am planning on using but I changed out my Neutrona Wand for an RGB one. It already has the screen accurate switches installed on it and all I have to do is wire it up. Is there a way to run wires from the RGB Wand directly to the GBFans soundboard (allowing me to keep the existing switches) or would I have to purchase the GBFans Wand Light and Switches Kit and then modify it to allow for me to use the RGB switches?

The board looks like I could just attach a wire then screw it down but I don’t know for sure.

---

<div class="post-metadata">

**Author:** ![hybridflux](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/h/43a26b/32.png) [@hybridflux](https://forum.gbfans.com/u/hybridflux)\
**Post date:** [November 16, 2019, 1:14am UTC](https://forum.gbfans.com/t/gbfans-soundboard-wiring-question/3081/2 "2019-11-16T01:14:14Z")

</div>

So I’m not entirely familiar with the RGB wands BUT I do know that the GBFans Soundboard works on a “grounded switch” setup. IE, if your wand also uses a common ground from the pack you can then piggy back off the switches. May not be pretty, but it would/should work.

---

<div class="post-metadata">

**Author:** ![SpookyDaveG](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/s/ac91a4/32.png) [@SpookyDaveG](https://forum.gbfans.com/u/SpookyDaveG)\
**Post date:** [November 16, 2019, 1:39am UTC](https://forum.gbfans.com/t/gbfans-soundboard-wiring-question/3081/3 "2019-11-16T01:39:52Z")

</div>

Sounds like a plan! Thanks!
