# GBNerds Proton Pack Project

**URL:** <https://forum.gbfans.com/t/gbnerds-proton-pack-project/28940>\
**Category:** Proton Packs\
**Created:** [November 27, 2011, 4:36am UTC](https://forum.gbfans.com/t/gbnerds-proton-pack-project/28940 "2011-11-27T04:36:57Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![postmortem01](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/p/ce73a5/32.png) [@postmortem01](https://forum.gbfans.com/u/postmortem01)\
**Post date:** [November 27, 2011, 4:36am UTC](https://forum.gbfans.com/t/gbnerds-proton-pack-project/28940/1 "2011-11-27T04:36:57Z")

</div>

Slave1pilot and I are working on a [Proton Pack](https://www.gbfans.com/wiki/equipment/proton-pack) that will have the measurements and proportions of the original packs but be as intended as far as finish. We understand that that’s how they were but since there are some exceptional packs available, we want to make this one our own.

---

<div class="post-metadata">

**Author:** ![XxEctOxX](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/x/59ef9b/32.png) [@XxEctOxX](https://forum.gbfans.com/u/XxEctOxX)\
**Post date:** [November 27, 2011, 5:22am UTC](https://forum.gbfans.com/t/gbnerds-proton-pack-project/28940/2 "2011-11-27T05:22:01Z")

</div>

this is gonna be fun

---

<div class="post-metadata">

**Author:** ![postmortem01](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/p/ce73a5/32.png) [@postmortem01](https://forum.gbfans.com/u/postmortem01)\
**Post date:** [November 27, 2011, 5:38pm UTC](https://forum.gbfans.com/t/gbnerds-proton-pack-project/28940/3 "2011-11-27T17:38:43Z")

</div>

I can’t wait to start cnc’ing this sucker. There are a few tweaks left to do but we will start this by next weekend. I’m still adjusting some dimensions. The edge softening will be done by hand. We’re going to machine this from a rigid tooling foam board made by Renshape. We’re being as cautious as possible since the board costs $900 per board. That would be an expensive disaster.

---

<div class="post-metadata">

**Author:** ![ProtonCharger](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/p/e0b2c6/32.png) [@ProtonCharger](https://forum.gbfans.com/u/ProtonCharger)\
**Post date:** [November 27, 2011, 6:30pm UTC](https://forum.gbfans.com/t/gbnerds-proton-pack-project/28940/4 "2011-11-27T18:30:11Z")

</div>

> [@postmortem01](#):
>
> We’re being as cautious as possible since the board costs $900 per board. That would be an expensive disaster.

you dont have 11 tries with this one.

---

<div class="post-metadata">

**Author:** ![ChapterMasterTuShan](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/c/6bbea6/32.png) [@ChapterMasterTuShan](https://forum.gbfans.com/u/ChapterMasterTuShan)\
**Post date:** [November 27, 2011, 8:41pm UTC](https://forum.gbfans.com/t/gbnerds-proton-pack-project/28940/5 "2011-11-27T20:41:57Z")

</div>

You’re going to attempt to cut the whole thing out in one go?

---

<div class="post-metadata">

**Author:** ![postmortem01](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/p/ce73a5/32.png) [@postmortem01](https://forum.gbfans.com/u/postmortem01)\
**Post date:** [November 28, 2011, 6:18am UTC](https://forum.gbfans.com/t/gbnerds-proton-pack-project/28940/6 "2011-11-28T06:18:15Z")

</div>

Oh. Of course not. That would be silly. We’re going to break it into parts and there will be laser cut parts and machined pieces as well

---

<div class="post-metadata">

**Author:** ![JoeLuna33](https://forum.gbfans.com/user_avatar/forum.gbfans.com/joeluna33/32/6280_2.png) [@JoeLuna33](https://forum.gbfans.com/u/JoeLuna33)\
**Post date:** [November 28, 2011, 6:45am UTC](https://forum.gbfans.com/t/gbnerds-proton-pack-project/28940/7 "2011-11-28T06:45:57Z")

</div>

I can’t wait to see this bad boy! I knew you guys were gonna knock it out of the park.

---

<div class="post-metadata">

**Author:** ![postmortem01](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/p/ce73a5/32.png) [@postmortem01](https://forum.gbfans.com/u/postmortem01)\
**Post date:** [November 28, 2011, 7:25am UTC](https://forum.gbfans.com/t/gbnerds-proton-pack-project/28940/8 "2011-11-28T07:25:11Z")

</div>

Well, we haven’t started any cutting yet so there is plenty of time to fail miserably.

Lol. We’re going to be increasing the size from known Gb1/Gb2 casting size to bring it back up to “original” size.

Increase will be approximately 5%+

---

<div class="post-metadata">

**Author:** ![postmortem01](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/p/ce73a5/32.png) [@postmortem01](https://forum.gbfans.com/u/postmortem01)\
**Post date:** [November 28, 2011, 4:55pm UTC](https://forum.gbfans.com/t/gbnerds-proton-pack-project/28940/9 "2011-11-28T16:55:06Z")

</div>

We were fortunate enough to be loaned a descendant casting of a screen used pack. The measurements taken were based on that pack while using a set of calipers. Everything jives with this pack. The reason for using a tangible pack is that there is not sufficient photo reference to make a highly accurate model of the [proton pack](https://www.gbfans.com/wiki/equipment/proton-pack). Using photos leads to just as much errors as measuring a 5 generation down casting.

---

<div class="post-metadata">

**Author:** ![postmortem01](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/p/ce73a5/32.png) [@postmortem01](https://forum.gbfans.com/u/postmortem01)\
**Post date:** [November 28, 2011, 9:02pm UTC](https://forum.gbfans.com/t/gbnerds-proton-pack-project/28940/10 "2011-11-28T21:02:37Z")

</div>

This model is a work in progress and some of the details will be added after the cnc process.

---

<div class="post-metadata">

**Author:** ![postmortem01](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/p/ce73a5/32.png) [@postmortem01](https://forum.gbfans.com/u/postmortem01)\
**Post date:** [November 28, 2011, 9:22pm UTC](https://forum.gbfans.com/t/gbnerds-proton-pack-project/28940/11 "2011-11-28T21:22:39Z")

</div>



---

<div class="post-metadata">

**Author:** ![Vincenzo330](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/v/8c91f0/32.png) [@Vincenzo330](https://forum.gbfans.com/u/Vincenzo330)\
**Post date:** [November 29, 2011, 1:25am UTC](https://forum.gbfans.com/t/gbnerds-proton-pack-project/28940/12 "2011-11-29T01:25:53Z")

</div>

This is fantastic guys! Poor Patrick, I bet he hasn’t seen daylight in weeks 😉 One thing though, aside from the 5% increase that you’ve already accounted for, the center valley of the shell that you’re basing your measurements on is about 1/8" too narrow. If you can accommodate for that on the model the correctly sized accurate parts will fit and look more aesthetically pleasing. As of right now the beam-line/filller tube might not fit.

---

<div class="post-metadata">

**Author:** ![postmortem01](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/p/ce73a5/32.png) [@postmortem01](https://forum.gbfans.com/u/postmortem01)\
**Post date:** [November 29, 2011, 1:30am UTC](https://forum.gbfans.com/t/gbnerds-proton-pack-project/28940/13 "2011-11-29T01:30:45Z")

</div>

Do you happen to know what that measurement should be Vinnie? Currently, with the 5%+ increase, it measures out at 1.78".

---

<div class="post-metadata">

**Author:** ![Vincenzo330](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/v/8c91f0/32.png) [@Vincenzo330](https://forum.gbfans.com/u/Vincenzo330)\
**Post date:** [November 29, 2011, 1:35am UTC](https://forum.gbfans.com/t/gbnerds-proton-pack-project/28940/14 "2011-11-29T01:35:35Z")

</div>

All my reference is in storage right now but I’ll text you this week with an answer 🙂

---

<div class="post-metadata">

**Author:** ![postmortem01](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/p/ce73a5/32.png) [@postmortem01](https://forum.gbfans.com/u/postmortem01)\
**Post date:** [November 29, 2011, 4:44am UTC](https://forum.gbfans.com/t/gbnerds-proton-pack-project/28940/15 "2011-11-29T04:44:46Z")

</div>

Thanks man. I appreciate it

---

<div class="post-metadata">

**Author:** ![slave1pilot](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/s/43a26b/32.png) [@slave1pilot](https://forum.gbfans.com/u/slave1pilot)\
**Post date:** [November 29, 2011, 3:56pm UTC](https://forum.gbfans.com/t/gbnerds-proton-pack-project/28940/16 "2011-11-29T15:56:25Z")

</div>

I like it so far.

postmortem and I will be going over the whole thing Friday night.

Hopefully we can get something started this weekend.

---

<div class="post-metadata">

**Author:** ![postmortem01](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/p/ce73a5/32.png) [@postmortem01](https://forum.gbfans.com/u/postmortem01)\
**Post date:** [December 4, 2011, 1:01am UTC](https://forum.gbfans.com/t/gbnerds-proton-pack-project/28940/17 "2011-12-04T01:01:17Z")

</div>

I’ll post some pictures of the adjusted model tomorrow. Slave1Pilot and I spent a good 6 hours redrawing and reshaping the components to get this where we want it. I think we are pretty much there with the [proton pack](https://www.gbfans.com/wiki/equipment/proton-pack). It’s CNC time!

---

<div class="post-metadata">

**Author:** ![Winston83](https://forum.gbfans.com/user_avatar/forum.gbfans.com/winston83/32/6038_2.png) [@Winston83](https://forum.gbfans.com/u/Winston83)\
**Post date:** [December 6, 2011, 2:17am UTC](https://forum.gbfans.com/t/gbnerds-proton-pack-project/28940/18 "2011-12-06T02:17:22Z")

</div>

Just wow.

---

<div class="post-metadata">

**Author:** ![Lewis\_Tully](https://forum.gbfans.com/user_avatar/forum.gbfans.com/lewis_tully/32/5930_2.png) [@Lewis\_Tully](https://forum.gbfans.com/u/Lewis_Tully)\
**Post date:** [December 6, 2011, 8:16am UTC](https://forum.gbfans.com/t/gbnerds-proton-pack-project/28940/19 "2011-12-06T08:16:14Z")

</div>

This is just… neat… Looking forward to seeing more of this!

---

<div class="post-metadata">

**Author:** ![MRblahface](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/m/5e9695/32.png) [@MRblahface](https://forum.gbfans.com/u/MRblahface)\
**Post date:** [December 6, 2011, 8:20am UTC](https://forum.gbfans.com/t/gbnerds-proton-pack-project/28940/20 "2011-12-06T08:20:32Z")

</div>

i wish I had a cnc/ cnc program knowledge. But that Looks amazing, you guys gonna make shells and such?

[Next page](https://forum.gbfans.com/t/gbnerds-proton-pack-project/28940.md?page=2)
