# Ghost Trap holder- no mod required

**URL:** <https://forum.gbfans.com/t/ghost-trap-holder-no-mod-required/23137>\
**Category:** Ghost Traps\
**Created:** [October 31, 2011, 3:52am UTC](https://forum.gbfans.com/t/ghost-trap-holder-no-mod-required/23137 "2011-10-31T03:52:37Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![njukgb](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/n/48db29/32.png) [@njukgb](https://forum.gbfans.com/u/njukgb)\
**Post date:** [October 31, 2011, 3:52am UTC](https://forum.gbfans.com/t/ghost-trap-holder-no-mod-required/23137/1 "2011-10-31T03:52:37Z")

</div>

Well seeing as everyone is doing there own [Ghost Trap](https://www.gbfans.com/wiki/equipment/ghost-trap) holder-type-thingy… thought I might as well give you what I worked with this weekend.

Putting the trap into Prop Mode- activating it to the end of the cycle was where it remained so the yellow and both red LEDs remained active.

I then attached the following around the neck of the trap handle;

![image](http://www.elanteluggage.com/images/180.jpg)

…then attached around the belt- total size, once attached, was about 4" to 6".

Afterwhich I attached the trap pedal as in the movie.

This remained with the loop hidden (as it was black and behind the pedal) solidly in place for the entire time out-and-about in mass crowds and drunken idiots.

Cheap, effective, need for a mod to the trap and no need for any other (visible) methods to hold the trap in place.

---

<div class="post-metadata">

**Author:** ![Super\_Sleuth](https://forum.gbfans.com/user_avatar/forum.gbfans.com/super_sleuth/32/5853_2.png) [@Super\_Sleuth](https://forum.gbfans.com/u/Super_Sleuth)\
**Post date:** [October 31, 2011, 7:34am UTC](https://forum.gbfans.com/t/ghost-trap-holder-no-mod-required/23137/2 "2011-10-31T07:34:17Z")

</div>

Mot sure what you mean could we get a pic?

---

<div class="post-metadata">

**Author:** ![thunderstruck507](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/e56c9b/32.png) [@thunderstruck507](https://forum.gbfans.com/u/thunderstruck507)\
**Post date:** [October 31, 2011, 3:09pm UTC](https://forum.gbfans.com/t/ghost-trap-holder-no-mod-required/23137/3 "2011-10-31T15:09:04Z")

</div>

A picture or visual aid would help here.

---

<div class="post-metadata">

**Author:** ![njukgb](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/n/48db29/32.png) [@njukgb](https://forum.gbfans.com/u/njukgb)\
**Post date:** [October 31, 2011, 4:28pm UTC](https://forum.gbfans.com/t/ghost-trap-holder-no-mod-required/23137/4 "2011-10-31T16:28:50Z")

</div>

Will take one- got the gear with me today… be up in a few hours.

---

<div class="post-metadata">

**Author:** ![njukgb](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/n/48db29/32.png) [@njukgb](https://forum.gbfans.com/u/njukgb)\
**Post date:** [October 31, 2011, 10:03pm UTC](https://forum.gbfans.com/t/ghost-trap-holder-no-mod-required/23137/5 "2011-10-31T22:03:02Z")

</div>

In these photos I have locked it around the [belt gizmo](https://www.gbfans.com/wiki/equipment/uniform/calculator-circuit-board) holder- which holds it a little further down the leg. It allowed me to walk a little freer than having it locked around the belt.

Thinking more- I think having a flat side of leather holster but with a lower slot where I could feed through the lock. That way I could also keep the gizmo too and the trap would not hang as far away from the body.

Wider- front-ish photo;

Closer- side-ish photo;