We’re venturing out today for new chemicals to try out.
There will be recipes and formulas very soon.
StayTuned!
Ok so we managed to get a new non toxic chemical to try with the slime,it’s works just as good as the other chemical we used,so we are now ready to post the ingredients and the recipe for the slime.
Ingredients:
Jello mix- Depends on the color you want,we went with green obviously.
powdered glitter- This is what makes the swirls in the slime itself,we get it at a local costume shop.
Acetone or Isopropryl Alcohol- This is where it gets nasty,Acetone will eat through plastic or rubber,so if you plan on putting the slime in either then you need to use the Isopropryl Alcohol instead of the Acetone.
Everyone getting this so far?
Now onto the actual recipe.
Recipe:
Take whatever container you are putting it in,we use glass pickle jars,and wash the container very well and let it dry.
Then taking a small measuring cup,put in 4 cups of water.
Then open the Jello packet and pour in a 1/4 of the envelope.
Take the powdered glitter and shake in a small dab of glitter.
Finally,put one cup of Acetone or Isopropryl Alcohol into the jar,seal the jar with a lid and shake up,the ingredients will swirl and mix and should give you the results of our slime.
So there you have it,if you have any questions then don’t hesitate to ask.
Here are pics of the slime using the Isopropryl Alcohol:
The other slimes posted were made using Acetone.
DO NOT LEAVE THE SLIME UNCOVERED IF USING ACETONE,IT IS VERY TOXIC!!!
**UltimateGBFan.
Please remove the reference to acetone in your formula.**
Here is the Material Safety Data Sheet information for Acetone.
ACETONE
-
Product Identification
Synonyms: Dimethylketone; 2-propanone; dimethylketal
CAS No.: 67-64-1
Molecular Weight: 58.08
Chemical Formula: (CH3)2CO
Product Codes:
J.T. Baker: 5008, 5018, 5356, 5580, 5965, 5975, 9001, 9002, 9003, 9004, 9005, 9006, 9007, 9008, 9009, 9010, 9015, 9024, 9036, 9125, 9254, 9271, A134, V655
Mallinckrodt: 0018, 2432, 2435, 2437, 2438, 2440, 2443, 2850, H451, H580, H981
-
Composition/Information on Ingredients
Ingredient CAS No Percent Hazardous
Acetone 67-64-1 99 - 100% Yes
-
Hazards Identification
Emergency Overview
DANGER! EXTREMELY FLAMMABLE LIQUID AND VAPOR. VAPOR MAY CAUSE FLASH FIRE. HARMFUL IF SWALLOWED OR INHALED. CAUSES IRRITATION TO SKIN, EYES AND RESPIRATORY TRACT. AFFECTS CENTRAL NERVOUS SYSTEM.
SAF-T-DATA™ Ratings (Provided here for your convenience)
Health Rating: 2 - Moderate
Flammability Rating: 3 - Severe (Flammable)
Reactivity Rating: 0 - None
Contact Rating: 3 - Severe
Lab Protective Equip: GOGGLES & SHIELD; LAB COAT & APRON; VENT HOOD; PROPER GLOVES; CLASS B EXTINGUISHER
Storage Color Code: Red (Flammable)
Potential Health Effects
Inhalation:
Inhalation of vapors irritates the respiratory tract. May cause coughing, dizziness, dullness, and headache. Higher concentrations can produce central nervous system depression, narcosis, and unconsciousness.
Ingestion:
Swallowing small amounts is not likely to produce harmful effects. Ingestion of larger amounts may produce abdominal pain, nausea and vomiting. Aspiration into lungs can produce severe lung damage and is a medical emergency. Other symptoms are expected to parallel inhalation.
Skin Contact:
Irritating due to defatting action on skin. Causes redness, pain, drying and cracking of the skin.
Eye Contact:
Vapors are irritating to the eyes. Splashes may cause severe irritation, with stinging, tearing, redness and pain.
Chronic Exposure:
Prolonged or repeated skin contact may produce severe irritation or dermatitis.
Aggravation of Pre-existing Conditions:
Use of alcoholic beverages enhances toxic effects. Exposure may increase the toxic potential of chlorinated hydrocarbons, such as chloroform, trichloroethane.
-
First Aid Measures
Inhalation:
Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion:
Aspiration hazard. If swallowed, vomiting may occur spontaneously, but DO NOT INDUCE. If vomiting occurs, keep head below hips to prevent aspiration into lungs. Never give anything by mouth to an unconscious person. Call a physician immediately.
Skin Contact:
Immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact:
Immediately flush eyes with plenty of water for at least 15 minutes, lifting upper and lower eyelids occasionally. Get medical attention.
-
Fire Fighting Measures
Fire:
Flash point: -20C (-4F) CC
Autoignition temperature: 465C (869F)
Flammable limits in air % by volume:
lel: 2.5; uel: 12.8
Extremely Flammable Liquid and Vapor! Vapor may cause flash fire.
Explosion:
Above flash point, vapor-air mixtures are explosive within flammable limits noted above. Vapors can flow along surfaces to distant ignition source and flash back. Contact with strong oxidizers may cause fire. Sealed containers may rupture when heated. This material may produce a floating fire hazard. Sensitive to static discharge.
Fire Extinguishing Media:
Dry chemical, alcohol foam or carbon dioxide. Water may be ineffective. Water spray may be used to keep fire exposed containers cool, dilute spills to nonflammable mixtures, protect personnel attempting to stop leak and disperse vapors.
Special Information:
In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full facepiece operated in the pressure demand or other positive pressure mode.
-
Accidental Release Measures
Ventilate area of leak or spill. Remove all sources of ignition. Wear appropriate personal protective equipment as specified in Section 8. Isolate hazard area. Keep unnecessary and unprotected personnel from entering. Contain and recover liquid when possible. Use non-sparking tools and equipment. Collect liquid in an appropriate container or absorb with an inert material (e. g., vermiculite, dry sand, earth), and place in a chemical waste container. Do not use combustible materials, such as saw dust. Do not flush to sewer! If a leak or spill has not ignited, use water spray to disperse the vapors, to protect personnel attempting to stop leak, and to flush spills away from exposures. US Regulations (CERCLA) require reporting spills and releases to soil, water and air in excess of reportable quantities. The toll free number for the US Coast Guard National Response Center is (800) 424-8802.
J. T. Baker SOLUSORB® solvent adsorbent is recommended for spills of this product.
-
Handling and Storage
Protect against physical damage. Store in a cool, dry well-ventilated location, away from any area where the fire hazard may be acute. Outside or detached storage is preferred. Separate from incompatibles. Containers should be bonded and grounded for transfers to avoid static sparks. Storage and use areas should be No Smoking areas. Use non-sparking type tools and equipment, including explosion proof ventilation. Containers of this material may be hazardous when empty since they retain product residues (vapors, liquid); observe all warnings and precautions listed for the product.
-
Exposure Controls/Personal Protection
Airborne Exposure Limits:
Acetone:
-OSHA Permissible Exposure Limit (PEL):
1000 ppm (TWA)
-ACGIH Threshold Limit Value (TLV):
500 ppm (TWA), 750 ppm (STEL) A4 - not classifiable as a human carcinogen
Ventilation System:
A system of local and/or general exhaust is recommended to keep employee exposures below the Airborne Exposure Limits. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for details.
Personal Respirators (NIOSH Approved):
If the exposure limit is exceeded and engineering controls are not feasible, a half-face organic vapor respirator may be worn for up to ten times the exposure limit, or the maximum use concentration specified by the appropriate regulatory agency or respirator supplier, whichever is lowest. A full-face piece organic vapor respirator may be worn up to 50 times the exposure limit, or the maximum use concentration specified by the appropriate regulatory agency or respirator supplier, whichever is lowest. For emergencies or instances where the exposure levels are not known, use a full-face piece positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection:
Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection:
Use chemical safety goggles and/or a full face shield where splashing is possible. Maintain eye wash fountain and quick-drench facilities in work area.
-
Physical and Chemical Properties
Appearance:
Clear, colorless, volatile liquid.
Odor:
Fragrant, mint-like
Solubility:
Miscible in all proportions in water.
Specific Gravity:
0.79 @ 20C/4C
pH:
No information found.
% Volatiles by volume @ 21C (70F):
100
Boiling Point:
56.5C (133F) @ 760 mm Hg
Melting Point:
-95C (-139F)
Vapor Density (Air=1):
2.0
Vapor Pressure (mm Hg):
400 @ 39.5C (104F)
Evaporation Rate (BuAc=1):
ca. 7.7
-
Stability and Reactivity
Stability:
Stable under ordinary conditions of use and storage.
Hazardous Decomposition Products:
Carbon dioxide and carbon monoxide may form when heated to decomposition.
Hazardous Polymerization:
Will not occur.
Incompatibilities:
Concentrated nitric and sulfuric acid mixtures, oxidizing materials, chloroform, alkalis, chlorine compounds, acids, potassium t-butoxide.
Conditions to Avoid:
Heat, flames, ignition sources and incompatibles.
-
Toxicological Information
Oral rat LD50: 5800 mg/kg; Inhalation rat LC50: 50,100mg/m3; Irritation eye rabbit, Standard Draize, 20 mg severe; investigated as a tumorigen, mutagen, reproductive effector.
--------\Cancer Lists------------------------------------------------------
---NTP Carcinogen---
Ingredient Known Anticipated IARC Category
Acetone (67-64-1) No No None
-
Ecological Information
Environmental Fate:
When released into the soil, this material is expected to readily biodegrade. When released into the soil, this material is expected to leach into groundwater. When released into the soil, this material is expected to quickly evaporate. When released into water, this material is expected to readily biodegrade. When released to water, this material is expected to quickly evaporate. This material has a log octanol-water partition coefficient of less than 3.0. This material is not expected to significantly bioaccumulate. When released into the air, this material may be moderately degraded by reaction with photochemically produced hydroxyl radicals. When released into the air, this material may be moderately degraded by photolysis. When released into the air, this material is expected to be readily removed from the atmosphere by wet deposition.
Environmental Toxicity:
This material is not expected to be toxic to aquatic life. The LC50/96-hour values for fish are over 100 mg/l.
-
Disposal Considerations
Whatever cannot be saved for recovery or recycling should be handled as hazardous waste and sent to a RCRA approved incinerator or disposed in a RCRA approved waste facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements.
-
Transport Information
Domestic (Land, D.O.T.)
Proper Shipping Name: ACETONE
Hazard Class: 3
UN/NA: UN1090
Packing Group: II
Information reported for product/size: 188L
International (Water, I.M.O.)
Proper Shipping Name: ACETONE
Hazard Class: 3
UN/NA: UN1090
Packing Group: II
Information reported for product/size: 188L
-
Regulatory Information
--------\Chemical Inventory Status - Part 1---------------------------------
Ingredient TSCA EC Japan Australia
Acetone (67-64-1) Yes Yes Yes Yes
--------\Chemical Inventory Status - Part 2---------------------------------
--Canada--
Ingredient Korea DSL NDSL Phil.
Acetone (67-64-1) Yes Yes No Yes
--------\Federal, State & International Regulations - Part 1----------------
-SARA 302- ------SARA 313------
Ingredient RQ TPQ List Chemical Catg.
Acetone (67-64-1) No No Yes No
--------\Federal, State & International Regulations - Part 2----------------
-RCRA- -TSCA-
Ingredient CERCLA 261.33 8(d)
Acetone (67-64-1) 5000 U002 No
Chemical Weapons Convention: No TSCA 12(b): No CDTA: Yes
SARA 311/312: Acute: Yes Chronic: No Fire: Yes Pressure: No
Reactivity: No (Pure / Liquid)
Australian Hazchem Code: 2[Y]E
Poison Schedule: None allocated.
WHMIS:
This MSDS has been prepared according to the hazard criteria of the Controlled Products Regulations (CPR) and the MSDS contains all of the information required by the CPR.
-
Other Information
NFPA Ratings: Health: 1 Flammability: 3 Reactivity: 0
Label Hazard Warning:
DANGER! EXTREMELY FLAMMABLE LIQUID AND VAPOR. VAPOR MAY CAUSE FLASH FIRE. HARMFUL IF SWALLOWED OR INHALED. CAUSES IRRITATION TO SKIN, EYES AND RESPIRATORY TRACT. AFFECTS CENTRAL NERVOUS SYSTEM.
Label Precautions:
Keep away from heat, sparks and flame.
Keep container closed.
Use only with adequate ventilation.
Wash thoroughly after handling.
Avoid breathing vapor.
Avoid contact with eyes, skin and clothing.
Label First Aid:
Aspiration hazard. If swallowed, vomiting may occur spontaneously, but DO NOT INDUCE. If vomiting occurs, keep head below hips to prevent aspiration into lungs. Never give anything by mouth to an unconscious person. Call a physician immediately. If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. In case of contact, immediately flush eyes or skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Wash clothing before reuse. In all cases, get medical attention.
Product Use:
Laboratory Reagent.
Revision Information:
No Changes.
Disclaimer:
Mallinckrodt Baker, Inc. provides the information contained herein in good faith but makes no representation as to its comprehensiveness or accuracy. This document is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose. MALLINCKRODT BAKER, INC. MAKES NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE INFORMATION SET FORTH HEREIN OR THE PRODUCT TO WHICH THE INFORMATION REFERS. ACCORDINGLY, MALLINCKRODT BAKER, INC. WILL NOT BE RESPONSIBLE FOR DAMAGES RESULTING FROM USE OF OR RELIANCE UPON THIS INFORMATION.
Prepared by: Environmental Health & Safety
Phone Number: (314) 654-1600 (U.S.A.)
Was that really effing needed?
I’ll answer
No
Spooky, if you want to poison yourself with acetone, which accumulates in the body and does not flush easily, go ahead.
The formula was posted as being non toxic, so yes, it was needed.
Yeah but you didn’t need to tell them to remove it; its what they did to make it.
Also we didn’t need the fucking wall of txt, you learned how to summarize in school fucking use it.
You’re right, no point arguing with a fool.
Let’s just put it this way…
Don’t use Acetone.
Isopropyl Alcohol is a better choice for a number of reasons.
It’s cheaper, less dangerous to the human body, and won’t damage as many materials.
I’m sure the majority of people who decide to get involved with chemicals are wise enough recognize a
potentially dangerous substance.
Anybody who catches that first wiff of those chemicals, as they first open the containers, will get the hint, quick.
We know you guys are smart.
So be very careful, goodluck, and enjoy.
Oh good we are in agreement then. I was certainly hoping we wouldn’t have to drag this out and keep waiting for your foolish brain to tick away for another answer.
As Dralin said just be careful with what ever method you use
Guys, this is slime we’re talking about. Take it easy. Acetone is dangerous, we get it. Just say it’s way too toxic for this purpose and move on.
Kev, he was just trying to help, don’t bust his balls.
Just being the voice of reason.
Oh, what % alcohol do you use and how much of it per jar?
We also stated much further up that it was toxic and not to be used on the human body,so chill dude.
Dan,it was 91%,you can get it at Wal Mart.
The original formula i was told was 1 part acetone, 2 parts water.
I pushed it to more than just 2 parts water and it looks just as good.
Same goes for the Isoprople. In that mixture i pushed beyond a 1 to 4 combination.
Just keep in mind the amount of jello mix and glitter.
It’s the glitter that gives the contrast and accents the ripples.
Just reiterate what I have said before,THIS SLIME IS FOR DISPLAY USE ONLY,DO NOT USE ON YOUR COSTUME OR BODY.
The best and safest way to go about this is using the Isopropryl Alcohol,it gives the exact same effect that the acetone does.
good stuff.
If you want to make slime on your suits, Just mix green bubble bath with the glitter they used here.
What color jello did you guys end up using for the Black Slime?
My guess would be Black Cherry, but I figured I’d go to the source so I can whip up all 3 colors in one fell swoop 
Yeah, we used black cherry. but we didn’t have any black glitter to use, so used the green.
I still plan on making a ton of different combinations with jellos and glitters and see what comes out.
The black cherry gave a deep red color.
Pardon my bump (and pardon my fail if this has been suggested and/or tried with less-than-acceptable results elsewhere on the forum) but have you considered vodka instead of isopropyl alcohol? And I know I’ve seen food-safe pearlescent powder in the cake decorating section at Michael’s…
One might still not want to eat such a slime, but at least it would be made entirely of things that are more or less safe to put in your mouth. 
I just used this recipe today, but mine did not come out like yours did 
i used a ratio of 1part 50% alc to 3 parts water. about 2 tbsp of glitter and half the packet of jello mix…what happened?