# Help connecting neutrona wand to soundboard

**URL:** <https://forum.gbfans.com/t/help-connecting-neutrona-wand-to-soundboard/14251>\
**Category:** Proton Packs\
**Created:** [July 20, 2018, 8:04am UTC](https://forum.gbfans.com/t/help-connecting-neutrona-wand-to-soundboard/14251 "2018-07-20T08:04:01Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![v0cal\_assass1n](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/v/e47774/32.png) [@v0cal\_assass1n](https://forum.gbfans.com/u/v0cal_assass1n)\
**Post date:** [July 20, 2018, 8:04am UTC](https://forum.gbfans.com/t/help-connecting-neutrona-wand-to-soundboard/14251/1 "2018-07-20T08:04:01Z")

</div>

Just received a [proton pack](https://www.gbfans.com/wiki/equipment/proton-pack) from Karnivorous Creations and it came in two pieces: the way itself and the pack. It looks like it’s have to plug the wand into a soundboard inside the pack but I have no way of removing the [motherboard](https://www.gbfans.com/wiki/equipment/proton-pack/motherboard).

---

<div class="post-metadata">

**Author:** ![christof](https://forum.gbfans.com/user_avatar/forum.gbfans.com/christof/32/187349_2.png) [@christof](https://forum.gbfans.com/u/christof)\
**Post date:** [July 20, 2018, 10:18pm UTC](https://forum.gbfans.com/t/help-connecting-neutrona-wand-to-soundboard/14251/2 "2018-07-20T22:18:07Z")

</div>

Weeeeellll

I’ve never handled a Karniverous pack, but I’m gonna make some assumptions based on what I do know!

So the pack as you know, is a [Motherboard](https://www.gbfans.com/wiki/equipment/proton-pack/motherboard) and Shell. The Shell is attached with a set of four socket cap screws. One should be below the [Ion Arm](https://www.gbfans.com/shop/aluminum-welded-ion-arm), one below the Injection block on the side of the [Cyclotron](https://www.gbfans.com/wiki/equipment/proton-pack/cyclotron), one directly to the left of the hose port, and the last one is under the [V-hook](https://www.gbfans.com/wiki/equipment/proton-pack/v-hook) on the gun mount block.

If you carefully remove those four screws, then lift the shell upwards it should come free. I’m gonna repeat myself here, be sure to lift the shell UP, if you don’t know how the motherboard is laid out yet and lift at an angle you could end up damaging light mountings.

---

<div class="post-metadata">

**Author:** ![v0cal\_assass1n](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/v/e47774/32.png) [@v0cal\_assass1n](https://forum.gbfans.com/u/v0cal_assass1n)\
**Post date:** [July 20, 2018, 11:20pm UTC](https://forum.gbfans.com/t/help-connecting-neutrona-wand-to-soundboard/14251/3 "2018-07-20T23:20:22Z")

</div>

> [@Christof](#):
>
> Weeeeellll
> 
> I’ve never handled a Karniverous pack, but I’m gonna make some assumptions based on what I do know!
> 
> So the pack as you know, is a Motherboard and Shell. The Shell is attached with a set of four socket cap screws. One should be below the Ion Arm, one below the Injection block on the side of the Cyclotron, one directly to the left of the hose port, and the last one is under the V-hook on the gun mount block.
> 
> If you carefully remove those four screws, then lift the shell upwards it should come free. I’m gonna repeat myself here, be sure to lift the shell UP, if you don’t know how the motherboard is laid out yet and lift at an angle you could end up damaging light mountings.

I was hoping it wasn’t any of the Allen screws, but I managed to connect them and lights are working fine. The sound, however, has a sputtering to it.

---

<div class="post-metadata">

**Author:** ![crabbo\_1](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/c/e9a140/32.png) [@crabbo\_1](https://forum.gbfans.com/u/crabbo_1)\
**Post date:** [July 22, 2018, 7:37am UTC](https://forum.gbfans.com/t/help-connecting-neutrona-wand-to-soundboard/14251/4 "2018-07-22T07:37:42Z")

</div>

Check all connections would be the first move.
