# hijacking electronics and sound

**URL:** <https://forum.gbfans.com/t/hijacking-electronics-and-sound/21074>\
**Category:** Proton Packs\
**Created:** [December 9, 2020, 1:33am UTC](https://forum.gbfans.com/t/hijacking-electronics-and-sound/21074 "2020-12-09T01:33:29Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![adam\_lavery](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/a/e9bcb4/32.png) [@adam\_lavery](https://forum.gbfans.com/u/adam_lavery)\
**Post date:** [December 9, 2020, 1:33am UTC](https://forum.gbfans.com/t/hijacking-electronics-and-sound/21074/1 "2020-12-09T01:33:29Z")

</div>

hello all

in prep for my first build i have been researching lights and sound of course.

i got a steal on an open box return of the plasma series Spengler wand which has lights and sound and feels like it has a bit of a rumble motor too - it needs a few tweaks such as the brass parts and a bit of detail but its a very solid grounding.

its pretty loud for what it is but i was wondering if it was viable to hijack the sound source and run it to a battery powered amplifier board in the pack and then output that better speakers. then i can just treat the lights as a separate entity without the expenditure of fancy Arduino or similar rigs (yes i know i will have to be able to sequence the pack lights somehow to get them to flash accurately)…

anyone tried this or have any thoughts? having built an arcade cab and several guitars i have learned that electronics are not my strongest suit and soldering is not fun. but for a first pack build i don’t fancy the cost of a full blown setup given i have sounds already in the wand.

---

<div class="post-metadata">

**Author:** ![Rvonvolen](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/r/9de053/32.png) [@Rvonvolen](https://forum.gbfans.com/u/Rvonvolen)\
**Post date:** [December 9, 2020, 2:10am UTC](https://forum.gbfans.com/t/hijacking-electronics-and-sound/21074/2 "2020-12-09T02:10:11Z")

</div>

Check out Shawn Schops on YouTube! He has built a full [afterlife](https://www.gbfans.com/shop/ghostbusters-afterlife) pack and has hooked up an amplifier to the wand by soldering the 2 speaker leads and ran them to an amplifier. You can also go the route that “Peace, Love and Guns” went in his video on YouTube and hook up an audio jack. I’ll be using a GBfans soundboard to run a button to the wand to make the vent sound on my build. I’ll also be able to play the song, another powerup sound with the hum, and the lights from some switches on the pack, I’ll put links for the videos I’m talking about below. Hope this helps!

Peace, Love and guns’s video: [https://youtu.be/eDmHGA3ytjE](https://youtu.be/eDmHGA3ytjE)

Shawn’s video: [https://youtu.be/-\_WK8XPTh-0](https://youtu.be/-_WK8XPTh-0)

---

<div class="post-metadata">

**Author:** ![adam\_lavery](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/a/e9bcb4/32.png) [@adam\_lavery](https://forum.gbfans.com/u/adam_lavery)\
**Post date:** [December 9, 2020, 2:32am UTC](https://forum.gbfans.com/t/hijacking-electronics-and-sound/21074/3 "2020-12-09T02:32:23Z")

</div>

awesome thanks Rvonvolen i will check those out.
