# Homemade Slimer Sculpture!

**URL:** <https://forum.gbfans.com/t/homemade-slimer-sculpture/5298>\
**Category:** Other Props\
**Created:** [February 18, 2012, 3:28pm UTC](https://forum.gbfans.com/t/homemade-slimer-sculpture/5298 "2012-02-18T15:28:21Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![Reav3r66](https://forum.gbfans.com/user_avatar/forum.gbfans.com/reav3r66/32/6364_2.png) [@Reav3r66](https://forum.gbfans.com/u/Reav3r66)\
**Post date:** [February 18, 2012, 3:28pm UTC](https://forum.gbfans.com/t/homemade-slimer-sculpture/5298/1 "2012-02-18T15:28:21Z")

</div>

In between working on my first [proton pack](https://www.gbfans.com/wiki/equipment/proton-pack), [slime blower](https://www.gbfans.com/wiki/equipment/slime-blower) and RGB pack, I decided that it would be a good idea to build a life size [slimer](https://www.gbfans.com/wiki/characters/slimer) sculpture. I’m not quite finished, but I thought I would post my progress up to this point, in case anyone had some tips or suggestions. I am not good at sculpting things and there are people that could do this a lot more justice than I could. Maybe if anything, it will inspire someone to do the same…

I started with a small 5" rubber ball from target. Pretty sure it had princess’s on it (but that detail is not important)

 ![image](https://discdn.gbfans.com/original/3X/8/5/85f9ad8ff34df9ae4cdfc2418d0b140a2ec0b493.jpeg)

Here you can see it starting to take shape. I just kept slapping ■■■■■ of news paper on to the thing and taping them down until I got the shape I wanted.

 ![image](https://discdn.gbfans.com/original/3X/b/8/b89e7cdbe1ae557726cf738117238cc7c0ce5660.jpeg)

My daughter stands next to it so you can see the scale. I also used a wire hanger for the arms and rolled up tape for the fingers.

 ![image](https://discdn.gbfans.com/original/3X/b/b/bb2efa66a04abf0edf0e2da8b244d606eace14c9.jpeg)

Then I used the age old method of paper mache…disgusting blob!

 ![image](https://discdn.gbfans.com/original/3X/f/3/f35eaffb161fd4ef4e7edfa79a110abd25196fbb.jpeg)

 ![image](https://discdn.gbfans.com/original/3X/5/3/531e158696ad3b7b18c4c096d321875eee6f4a45.jpeg)

I used paper towels to form the mouth. They are firmer and easier to shape.

 ![image](https://discdn.gbfans.com/original/3X/8/f/8f791880583fe36d471187c04d99a4917b9b8a91.jpeg)

Afterwards, I used something called paper mache clay to sculpt the face.

 ![image](https://discdn.gbfans.com/original/3X/8/f/8ffc8de8b47040de60e044ec51707f48aec663ba.jpeg)

he had a huge nose, so i fixed it. also I didnt like the teeth…I will fix those in a second

 ![image](https://discdn.gbfans.com/original/3X/b/1/b16132f3201e6dd1889d040fa62e906844151dd5.jpeg)

more paper mache to cover the mouth and some other spots. Also stuffed paper in the gaps of his mouth

 ![image](https://discdn.gbfans.com/original/3X/7/b/7b55e4ef77cd597dd129738d7d6c0daf5822b9dc.jpeg)

More paper mache clay. and you can see the face starting to take shape. now i fix the teeth

 ![image](https://discdn.gbfans.com/original/3X/0/0/00f96dc16f52a352f8d9da4522dcd4a6a19b8fe0.jpeg)

Cover with a mixture of joint compound and elmers glue. He’s drippings with goo

 ![image](https://discdn.gbfans.com/original/3X/a/4/a476a27ca9dc2a6143c029cf0eaf287cc1ca738a.jpeg)

More to come…At this point I think I may need to get bondo involved.

---

<div class="post-metadata">

**Author:** ![goldenhawk](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/g/3ec8ea/32.png) [@goldenhawk](https://forum.gbfans.com/u/goldenhawk)\
**Post date:** [February 18, 2012, 7:31pm UTC](https://forum.gbfans.com/t/homemade-slimer-sculpture/5298/2 "2012-02-18T19:31:42Z")

</div>

Great looking start to the project. Looking forward to see how [Slimer](https://www.gbfans.com/wiki/characters/slimer) turns out.

---

<div class="post-metadata">

**Author:** ![KCGhostbuster](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/k/a9a28c/32.png) [@KCGhostbuster](https://forum.gbfans.com/u/KCGhostbuster)\
**Post date:** [February 18, 2012, 9:47pm UTC](https://forum.gbfans.com/t/homemade-slimer-sculpture/5298/3 "2012-02-18T21:47:04Z")

</div>

Looking good, keep posting your progress.

---

<div class="post-metadata">

**Author:** ![TheRockman](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/71c47a/32.png) [@TheRockman](https://forum.gbfans.com/u/TheRockman)\
**Post date:** [February 19, 2012, 12:06am UTC](https://forum.gbfans.com/t/homemade-slimer-sculpture/5298/4 "2012-02-19T00:06:34Z")

</div>

Wow! That’s really coming together. Can’t wait to see it finished.

---

<div class="post-metadata">

**Author:** ![Gareee](https://forum.gbfans.com/user_avatar/forum.gbfans.com/gareee/32/5994_2.png) [@Gareee](https://forum.gbfans.com/u/Gareee)\
**Post date:** [February 19, 2012, 1:47pm UTC](https://forum.gbfans.com/t/homemade-slimer-sculpture/5298/5 "2012-02-19T13:47:01Z")

</div>

I used paper mache clay on [Samhain](https://www.gbfans.com/wiki/characters/samhain) as well, with his insulation foam base. You can sand paper mache clay, and use a dremel and drill on it as well.

For a hard shell outer coating, you can make a gesso mix of white glue and joint compound, or you could use fiberglass.

You can paint it up using spray, acrylics, or even house paint, which will give it a plastic skin, if layered up.

I think I need that Neca bobble head now as well!

---

<div class="post-metadata">

**Author:** ![Reav3r66](https://forum.gbfans.com/user_avatar/forum.gbfans.com/reav3r66/32/6364_2.png) [@Reav3r66](https://forum.gbfans.com/u/Reav3r66)\
**Post date:** [February 19, 2012, 2:13pm UTC](https://forum.gbfans.com/t/homemade-slimer-sculpture/5298/6 "2012-02-19T14:13:48Z")

</div>

The only trouble I am having is, even after the gesso, I have cracks showing in places. That’s kinda why I was thinking bondo. I havent done any work with fiberglass yet, so maybe I will try that. Thanks!

---

<div class="post-metadata">

**Author:** ![Gareee](https://forum.gbfans.com/user_avatar/forum.gbfans.com/gareee/32/5994_2.png) [@Gareee](https://forum.gbfans.com/u/Gareee)\
**Post date:** [February 19, 2012, 2:19pm UTC](https://forum.gbfans.com/t/homemade-slimer-sculpture/5298/7 "2012-02-19T14:19:20Z")

</div>

I used elmer’s wood putty on cracks, and it worked fine. I’d add a top layer or two of house paint (to get a smooth surface), and then lightly sand that. If you already have gesso on, fiberglass might just be additional overkill work.

EDIT: I didn’t notice your last “cake icing” pic. It looks like you made your gesso much too thick. It shouldn’t be like cake icing, but should be more like a slighty thinned house paint constancy.

That stuff cures like rock, and you might have a tough time dremmelling the teeth to get your detail back.

If that ends up being the case, a possibility might be to cut the teeth out, and then make him sculpey “dentures” so they can have detail. Once cured you can glue em in, and just paint em up, since they will already have a hard surface.

To give him a nice shiny “wet” gloss coat, locate some Johnson and Johnson floor wax “Powered by Future” You can brush or spray that on, and it will add a waterproof VERY wet look once dry. You can even use it as a thinner for waterbased outpaint or water based acrylic paint to add some additional gloss to them as well.

---

<div class="post-metadata">

**Author:** ![adam\_fozz](https://forum.gbfans.com/user_avatar/forum.gbfans.com/adam_fozz/32/5898_2.png) [@adam\_fozz](https://forum.gbfans.com/u/adam_fozz)\
**Post date:** [March 8, 2012, 10:45am UTC](https://forum.gbfans.com/t/homemade-slimer-sculpture/5298/8 "2012-03-08T10:45:04Z")

</div>

Lookin’ Good!

---

<div class="post-metadata">

**Author:** ![TheRockman](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/71c47a/32.png) [@TheRockman](https://forum.gbfans.com/u/TheRockman)\
**Post date:** [March 8, 2012, 8:40pm UTC](https://forum.gbfans.com/t/homemade-slimer-sculpture/5298/9 "2012-03-08T20:40:47Z")

</div>

So how’s progress on this? Would love to see it finished!

---

<div class="post-metadata">

**Author:** ![Reav3r66](https://forum.gbfans.com/user_avatar/forum.gbfans.com/reav3r66/32/6364_2.png) [@Reav3r66](https://forum.gbfans.com/u/Reav3r66)\
**Post date:** [March 8, 2012, 9:05pm UTC](https://forum.gbfans.com/t/homemade-slimer-sculpture/5298/10 "2012-03-08T21:05:04Z")

</div>

Didn’t mean to neglect the topic, i have just been busy and once I actually painted it, i wasn’t thrilled with the result. Here is what I have so far… i first went with the movie style eyes, and then switched to the animated (which I like better). still needs work though

![image](http://www.gbfans.com/images/pb/reav3r66/IMG_0495.jpg)

![image](http://www.gbfans.com/images/pb/reav3r66/IMG_0493.jpg)

---

<div class="post-metadata">

**Author:** ![Gareee](https://forum.gbfans.com/user_avatar/forum.gbfans.com/gareee/32/5994_2.png) [@Gareee](https://forum.gbfans.com/u/Gareee)\
**Post date:** [March 8, 2012, 10:31pm UTC](https://forum.gbfans.com/t/homemade-slimer-sculpture/5298/11 "2012-03-08T22:31:55Z")

</div>

For eyes, maybe pick up a few of those plastic easter eggs that have 1/2 clear, and open the long way. Use th eclear parts as eye outers, maybe add upper or lower lids, and maybe use ping pong balls for the eye centers?

---

<div class="post-metadata">

**Author:** ![ProtonCharger](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/p/e0b2c6/32.png) [@ProtonCharger](https://forum.gbfans.com/u/ProtonCharger)\
**Post date:** [March 9, 2012, 12:21am UTC](https://forum.gbfans.com/t/homemade-slimer-sculpture/5298/12 "2012-03-09T00:21:38Z")

</div>

finally a larger scale [slimer](https://www.gbfans.com/wiki/characters/slimer) sculpt i can see how to make one of my own!

---

<div class="post-metadata">

**Author:** ![WolfShark](https://forum.gbfans.com/user_avatar/forum.gbfans.com/wolfshark/32/5853_2.png) [@WolfShark](https://forum.gbfans.com/u/WolfShark)\
**Post date:** [March 9, 2012, 6:49pm UTC](https://forum.gbfans.com/t/homemade-slimer-sculpture/5298/13 "2012-03-09T18:49:57Z")

</div>

that looks so awesome 🙂

---

<div class="post-metadata">

**Author:** ![xtrmn8r17](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/x/f0a364/32.png) [@xtrmn8r17](https://forum.gbfans.com/u/xtrmn8r17)\
**Post date:** [March 9, 2012, 7:17pm UTC](https://forum.gbfans.com/t/homemade-slimer-sculpture/5298/14 "2012-03-09T19:17:00Z")

</div>

awesome! great work!!

---

<div class="post-metadata">

**Author:** ![KickedInTheVader](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/k/c0e974/32.png) [@KickedInTheVader](https://forum.gbfans.com/u/KickedInTheVader)\
**Post date:** [March 9, 2012, 9:16pm UTC](https://forum.gbfans.com/t/homemade-slimer-sculpture/5298/15 "2012-03-09T21:16:08Z")

</div>

This is a great build, really makes me want to do my own, turn him into a lamp or something lol.

---

<div class="post-metadata">

**Author:** ![gEkX](https://forum.gbfans.com/user_avatar/forum.gbfans.com/gekx/32/6229_2.png) [@gEkX](https://forum.gbfans.com/u/gEkX)\
**Post date:** [March 9, 2012, 10:54pm UTC](https://forum.gbfans.com/t/homemade-slimer-sculpture/5298/16 "2012-03-09T22:54:46Z")

</div>

A lamp with a green bulb would be pretty cool..

---

<div class="post-metadata">

**Author:** ![KickedInTheVader](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/k/c0e974/32.png) [@KickedInTheVader](https://forum.gbfans.com/u/KickedInTheVader)\
**Post date:** [March 9, 2012, 11:03pm UTC](https://forum.gbfans.com/t/homemade-slimer-sculpture/5298/17 "2012-03-09T23:03:00Z")

</div>

Thanks exactly what I was thinking.

---

<div class="post-metadata">

**Author:** ![petevenkmen134](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/p/779978/32.png) [@petevenkmen134](https://forum.gbfans.com/u/petevenkmen134)\
**Post date:** [May 2, 2012, 11:18pm UTC](https://forum.gbfans.com/t/homemade-slimer-sculpture/5298/18 "2012-05-02T23:18:00Z")

</div>

that is cool

---

<div class="post-metadata">

**Author:** ![crusader\_x](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/c/97f17d/32.png) [@crusader\_x](https://forum.gbfans.com/u/crusader_x)\
**Post date:** [May 3, 2012, 4:39am UTC](https://forum.gbfans.com/t/homemade-slimer-sculpture/5298/19 "2012-05-03T04:39:35Z")

</div>

How flexible is it? It there any pose ability at all? I have been working on a project of something similar but have been considered starting with a wire frame in order to be able to pose the hands and fingers a bit.

---

<div class="post-metadata">

**Author:** ![joeghostbuster](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/j/e99b99/32.png) [@joeghostbuster](https://forum.gbfans.com/u/joeghostbuster)\
**Post date:** [May 3, 2012, 2:23pm UTC](https://forum.gbfans.com/t/homemade-slimer-sculpture/5298/20 "2012-05-03T14:23:04Z")

</div>

also I would paint the teeth with a more yellow-ish color, he looks weird with bright white teeth
