# How to Modify a Thrower

**URL:** <https://forum.gbfans.com/t/how-to-modify-a-thrower/15724>\
**Category:** Proton Packs\
**Created:** [October 5, 2011, 3:38pm UTC](https://forum.gbfans.com/t/how-to-modify-a-thrower/15724 "2011-10-05T15:38:40Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![jmuhobo](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/j/87869e/32.png) [@jmuhobo](https://forum.gbfans.com/u/jmuhobo)\
**Post date:** [October 5, 2011, 3:38pm UTC](https://forum.gbfans.com/t/how-to-modify-a-thrower/15724/1 "2011-10-05T15:38:40Z")

</div>

Hi All,

I am currently in the process of building my [Proton Pack](https://www.gbfans.com/wiki/equipment/proton-pack) Halloween. all my parts are in (except [bumper](https://www.gbfans.com/wiki/equipment/proton-pack/bumper), coming in a week).

I have a question about a thrower part. I bought the thrower gun kit from Multimediamayhem (Colin is a great guy).

The only problem is that the body has no opening for my light kits ( The Yellow bar). What is a good way to cut into Resin without causing damage to it.

This is a link to the gun kit.

[http://www.multimediamayhem.net/protongunkit.htm](http://www.multimediamayhem.net/protongunkit.htm)

Any suggestions is greatly appreciated!

---

<div class="post-metadata">

**Author:** ![jackdoud](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/j/6a8cbe/32.png) [@jackdoud](https://forum.gbfans.com/u/jackdoud)\
**Post date:** [October 5, 2011, 4:10pm UTC](https://forum.gbfans.com/t/how-to-modify-a-thrower/15724/2 "2011-10-05T16:10:59Z")

</div>

Easiest way would be a dremel tool. Baring that a drill, an xacto knife and some files will work.

---

<div class="post-metadata">

**Author:** ![djfm0413](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/d/82dd89/32.png) [@djfm0413](https://forum.gbfans.com/u/djfm0413)\
**Post date:** [October 5, 2011, 4:34pm UTC](https://forum.gbfans.com/t/how-to-modify-a-thrower/15724/3 "2011-10-05T16:34:59Z")

</div>

I just built his kit and it was awesome for a first time prop builder. I dont own a dremel tool but i just drilled holes all thru the [bar graph](https://www.gbfans.com/wiki/equipment/proton-pack/bar-graph) area then used a file to smooth and even it out and it worked like a charm.

---

<div class="post-metadata">

**Author:** ![jmuhobo](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/j/87869e/32.png) [@jmuhobo](https://forum.gbfans.com/u/jmuhobo)\
**Post date:** [October 5, 2011, 4:45pm UTC](https://forum.gbfans.com/t/how-to-modify-a-thrower/15724/4 "2011-10-05T16:45:03Z")

</div>

Thanks for the suggestions guys!