# I need help.... **URL:** \ **Category:** Ghost Traps\ **Created:** [September 30, 2010, 12:11am UTC](https://forum.gbfans.com/t/i-need-help/39794 "2010-09-30T00:11:08Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![Artanic](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/a/e36b37/32.png) [@Artanic](https://forum.gbfans.com/u/Artanic)\ **Post date:** [September 30, 2010, 12:11am UTC](https://forum.gbfans.com/t/i-need-help/39794/1 "2010-09-30T00:11:08Z")
Hello everybody! I´m spanish and my english isn´t good but i hope you can understand me. I want to start to build a [ghost trap](https://www.gbfans.com/wiki/equipment/ghost-trap) using [http://www.gbfans.com/equipment/plans/stefan-otto/](http://www.gbfans.com/equipment/plans/stefan-otto/) but in this plans aren´t measures of reference. Where can i see the measures in centimeters? If anyone talks spanish, it would be of great help Thanks! Hola a todos! Soy español y mi ingles no es muy bueno pero espero que podais entenderme. Quiero construir una trampa de fantasmas usando [http://www.gbfans.com/equipment/plans/stefan-otto/](http://www.gbfans.com/equipment/plans/stefan-otto/) pero en esos panos no hay medidas de referencia. Donde puedo ver las medidas en centimetros? Si alguien habla español seria una gran ayuda Gracias ---
**Author:** ![ChapterMasterTuShan](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/c/6bbea6/32.png) [@ChapterMasterTuShan](https://forum.gbfans.com/u/ChapterMasterTuShan)\ **Post date:** [September 30, 2010, 1:08am UTC](https://forum.gbfans.com/t/i-need-help/39794/2 "2010-09-30T01:08:46Z")
Those plans do not have any dimensions on them. You can print them out full scale (100%) and measure them though. ---
**Author:** ![chibigear](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/c/65b543/32.png) [@chibigear](https://forum.gbfans.com/u/chibigear)\ **Post date:** [September 30, 2010, 3:16am UTC](https://forum.gbfans.com/t/i-need-help/39794/3 "2010-09-30T03:16:13Z")
> [@ChapterMasterTu'Shan](#): > > Those plans do not have any dimensions on them. > > You can print them out full scale (100%) and measure them though. I did just that. That, and Norm’s and Sean’s plans to the side, and I got my traps done. Norm’s and Sean’s plans were in need to get some 3-D view for the trap. Here it is, minus weathering and inside electronics; ![IMG_4719.JPG](https://discdn.gbfans.com/original/2X/6/6902070ff6519ea584b76aaafad440bb2af1919c.jpeg) And, there is two 8 inch measurements on the first page. You can print the pages out, they are 1:2 scale. Half - scale that is. Just print them on 200% size, check the 8 inch measurement and you should be fine. ---
**Author:** ![jackdoud](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/j/6a8cbe/32.png) [@jackdoud](https://forum.gbfans.com/u/jackdoud)\ **Post date:** [September 30, 2010, 12:58pm UTC](https://forum.gbfans.com/t/i-need-help/39794/4 "2010-09-30T12:58:35Z")
I used JT001’s plans: [http://www.joseballesteros.com/misc/gb/jt001-trap-templates-v1.pdf](http://www.joseballesteros.com/misc/gb/jt001-trap-templates-v1.pdf) They’re just venkman71’s plans in 1:1 scale templates. All of the plans available have been made using imperial measurements so you’ll have to convert to metric on your own. ---
**Author:** ![DarkSpectre](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/d/958977/32.png) [@DarkSpectre](https://forum.gbfans.com/u/DarkSpectre)\ **Post date:** [September 30, 2010, 12:59pm UTC](https://forum.gbfans.com/t/i-need-help/39794/5 "2010-09-30T12:59:54Z")
Hola y bienvenidos. El mejor conjunto de planes de uso sería el Venkman71 planes. Son fáciles de seguir y tener todas las medidas que se necesitan. Espero que esto ayude. Una vez más la bienvenida y buena suerte. Hello and welcome. The best set of plans to use would be the Venkman71 plans. They are easy to follow and have all the measurements you would need. I hope this helps. Again welcome and good luck. ---
**Author:** ![Screwhead](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/s/b19c9b/32.png) [@Screwhead](https://forum.gbfans.com/u/Screwhead)\ **Post date:** [September 30, 2010, 2:44pm UTC](https://forum.gbfans.com/t/i-need-help/39794/6 "2010-09-30T14:44:56Z")
found this template: [http://www.joseballesteros.com/misc/gb/jt001-trap-templates-v1.pdf](http://www.joseballesteros.com/misc/gb/jt001-trap-templates-v1.pdf) just print it out and use that with whatever material works for you! ---
**Author:** ![DarkSpectre](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/d/958977/32.png) [@DarkSpectre](https://forum.gbfans.com/u/DarkSpectre)\ **Post date:** [September 30, 2010, 2:48pm UTC](https://forum.gbfans.com/t/i-need-help/39794/7 "2010-09-30T14:48:00Z")
Wow, that pdf is awesome guys!!! I’m totally going to use that for my belt trap Im making.