# I need some advice from the prop building gurus

**URL:** <https://forum.gbfans.com/t/i-need-some-advice-from-the-prop-building-gurus/39218>\
**Category:** General Discussion\
**Created:** [August 15, 2011, 5:41pm UTC](https://forum.gbfans.com/t/i-need-some-advice-from-the-prop-building-gurus/39218 "2011-08-15T17:41:10Z")\
**Posts on this page:** 12\
**Page:** 1

<div class="post-metadata">

**Author:** ![cowbybill](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/c/6bbea6/32.png) [@cowbybill](https://forum.gbfans.com/u/cowbybill)\
**Post date:** [August 15, 2011, 5:41pm UTC](https://forum.gbfans.com/t/i-need-some-advice-from-the-prop-building-gurus/39218/1 "2011-08-15T17:41:10Z")

</div>

Hi Guys,

I was wondering, has anyone tried to build Ash’s Chainsaw from “Evil Dead”? If so did you use a real chainsaw or a halloween prop one? This is the Halloween toy one I found:

 ![image](https://discdn.gbfans.com/original/3X/5/a/5ad8cbfa729b5c6e86ed51349d624c6b03b19917.jpeg)

I was think of repainting it red distressing it to look like the one in the film etc..

or would you recommend I just go the full route, buy one of the real ones, gut it and build from there.

The one nice thing about the prop one is that it does have a sound chip so it would already be wired for sound.

I know this girl who want s to go to this party this year as a deadite so we thought it would be cool to do the ash thing as well.

I know there’s alot of talent of this site so I thought I’d ask your opinion before I started my build.

Thanks!

---

<div class="post-metadata">

**Author:** ![ProtonCharger](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/p/e0b2c6/32.png) [@ProtonCharger](https://forum.gbfans.com/u/ProtonCharger)\
**Post date:** [August 15, 2011, 6:25pm UTC](https://forum.gbfans.com/t/i-need-some-advice-from-the-prop-building-gurus/39218/2 "2011-08-15T18:25:09Z")

</div>

i used a real chainsaw for mine. the real one uses a homelite xl, relatively inexpensive on ebay right now.

---

<div class="post-metadata">

**Author:** ![jackdoud](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/j/6a8cbe/32.png) [@jackdoud](https://forum.gbfans.com/u/jackdoud)\
**Post date:** [August 15, 2011, 6:37pm UTC](https://forum.gbfans.com/t/i-need-some-advice-from-the-prop-building-gurus/39218/3 "2011-08-15T18:37:33Z")

</div>

It all depends on if your object is to recreate the prop from the movie or just make a “chainsaw hand”. Either way would require a different approach to the project. If you want a recreation you really should start with the actual chainsaw. If you just want a decent looking prop for a party I’d go with dressing up the toy.

---

<div class="post-metadata">

**Author:** ![CaptCyan](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/c/e68b1a/32.png) [@CaptCyan](https://forum.gbfans.com/u/CaptCyan)\
**Post date:** [August 15, 2011, 7:23pm UTC](https://forum.gbfans.com/t/i-need-some-advice-from-the-prop-building-gurus/39218/4 "2011-08-15T19:23:06Z")

</div>

Like Jack said.

If it’s just for a costume and the housing is big enough to fit your hand into, then go with the toy. Less work and it will be relatively safe to swing around.

If it’s a display prop then find a Homelite on eBay and have fun building it.

[![image](https://discdn.gbfans.com/original/2X/1/1e7bc51487f18beb80464dfec59db8cd826f3c25.jpeg)](http://imageshack.us/photo/my-images/819/p5180020z.jpg/)

---

<div class="post-metadata">

**Author:** ![cowbybill](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/c/6bbea6/32.png) [@cowbybill](https://forum.gbfans.com/u/cowbybill)\
**Post date:** [August 15, 2011, 9:24pm UTC](https://forum.gbfans.com/t/i-need-some-advice-from-the-prop-building-gurus/39218/5 "2011-08-15T21:24:28Z")

</div>

Thanks Guys,

I’m going to go the real route, and buy one off E-bay. I think it’ll look a helluva lot better than a repainted plastic one.

---

<div class="post-metadata">

**Author:** ![MrSpider](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/m/58956e/32.png) [@MrSpider](https://forum.gbfans.com/u/MrSpider)\
**Post date:** [August 16, 2011, 3:29pm UTC](https://forum.gbfans.com/t/i-need-some-advice-from-the-prop-building-gurus/39218/6 "2011-08-16T15:29:11Z")

</div>

Cleaning it will be a pain… Lots of grease and oil lol

---

<div class="post-metadata">

**Author:** ![ProtonCharger](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/p/e0b2c6/32.png) [@ProtonCharger](https://forum.gbfans.com/u/ProtonCharger)\
**Post date:** [August 16, 2011, 3:56pm UTC](https://forum.gbfans.com/t/i-need-some-advice-from-the-prop-building-gurus/39218/7 "2011-08-16T15:56:59Z")

</div>

> [@Mr.Spider](#):
>
> Cleaning it will be a pain… Lots of grease and oil lol

i only cleaned the inside of mine. my bar’s also rusted up to the point of looking like a large amount of caked on gore. so leave it as is where you can, because he didnt use a squeaky clean chainsaw either.

i REALLY need to get to work on that raised metal part and a new clamp.

---

<div class="post-metadata">

**Author:** ![cowbybill](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/c/6bbea6/32.png) [@cowbybill](https://forum.gbfans.com/u/cowbybill)\
**Post date:** [August 16, 2011, 5:21pm UTC](https://forum.gbfans.com/t/i-need-some-advice-from-the-prop-building-gurus/39218/8 "2011-08-16T17:21:45Z")

</div>

I was thinking about all of that grease and oil. I’ll probably just use engine degreaser to clean the insides. It’ll be some work but at least the thing will have some weight to it and not look like a toy. Hopefully the Halloween stores around here will have this cheapo flat chainsaw that I can buy to canniablize for the sound chip and switch. Now I gotta find an airsoft double barrel shotgun and holster as well. The one on his back looks like an M-1 garand holster that straps to the old jeeps if that’s the case, that’ll be easy.

What did you guys use for the clamp part? it looks like an actual screw type clamp that you would pick up at home depot. in either the plumbing dept or air duct depts.

---

<div class="post-metadata">

**Author:** ![ThrowingChicken](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/46a35a/32.png) [@ThrowingChicken](https://forum.gbfans.com/u/ThrowingChicken)\
**Post date:** [August 16, 2011, 6:48pm UTC](https://forum.gbfans.com/t/i-need-some-advice-from-the-prop-building-gurus/39218/9 "2011-08-16T18:48:39Z")

</div>

I’d go real and just gut the insides out to make it lighter. I’d probably replace the chain with a standard roller chain (like a bike chain) since it doesn’t have teeth. Most people probably haven’t been close enough to a chainsaw to know the roller chain is supposed to have teeth, so they won’t even notice, and you won’t have to worry about cutting or snagging anyone.

---

<div class="post-metadata">

**Author:** ![cowbybill](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/c/6bbea6/32.png) [@cowbybill](https://forum.gbfans.com/u/cowbybill)\
**Post date:** [August 22, 2011, 8:07am UTC](https://forum.gbfans.com/t/i-need-some-advice-from-the-prop-building-gurus/39218/10 "2011-08-22T08:07:45Z")

</div>

I found one on Ebay and bidding on it right now hopefully I won’t get sniped. the thing is in bad shape paint wise but I figure if I have to clean and gut it anyways I could give a coat of primer and a new coat of paint before I distress the thing.

---

<div class="post-metadata">

**Author:** ![cowbybill](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/c/6bbea6/32.png) [@cowbybill](https://forum.gbfans.com/u/cowbybill)\
**Post date:** [August 22, 2011, 8:39pm UTC](https://forum.gbfans.com/t/i-need-some-advice-from-the-prop-building-gurus/39218/11 "2011-08-22T20:39:02Z")

</div>

Here’s the chainsaw I got on Ebay. It’s gonna need alot of work to clean it up, repaint it, and do the build but I think it will look better than a plastic one.

 ![image](https://discdn.gbfans.com/original/3X/b/1/b1faceeda384f9616b17b8faac1bef2635ffef0e.jpeg)

 ![image](https://discdn.gbfans.com/original/3X/d/e/de272c6be76387ccf671ad8348608d90e4654a63.jpeg)

If Figured for $20.00 If I mess it up I’m not out a whole lot.

---

<div class="post-metadata">

**Author:** ![The\_Stiff](https://forum.gbfans.com/user_avatar/forum.gbfans.com/the_stiff/32/6008_2.png) [@The\_Stiff](https://forum.gbfans.com/u/The_Stiff)\
**Post date:** [August 23, 2011, 4:14am UTC](https://forum.gbfans.com/t/i-need-some-advice-from-the-prop-building-gurus/39218/12 "2011-08-23T04:14:31Z")

</div>

That looks pretty awesome already! How did you do the weathering? A ton of Fullers Earth? :lol:
