# ID Badges and Holders

**URL:** <https://forum.gbfans.com/t/id-badges-and-holders/13797>\
**Category:** Other Props\
**Created:** [March 29, 2011, 1:24am UTC](https://forum.gbfans.com/t/id-badges-and-holders/13797 "2011-03-29T01:24:41Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![cowbybill](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/c/6bbea6/32.png) [@cowbybill](https://forum.gbfans.com/u/cowbybill)\
**Post date:** [March 29, 2011, 1:24am UTC](https://forum.gbfans.com/t/id-badges-and-holders/13797/1 "2011-03-29T01:24:41Z")

</div>

I know there is a thread about police style badges somewhere, but I have searched and searched for it and cannot find it.

A while ago I came across the thread where someone had made a metal police style badg. So I figured why not, I’ll give it a shot. I went to a site and had one made, went on E-bay bought an enamel pin dremeled the pin off and attached it to the center of the shield (at this point I need to add this was not my idea and if I could find the thread about it I would give proper credit to whomever did it.) this is how it came out:

![image](http://www.gbfans.com/images/pb/cowbybill/bADGE.jpg)

I also got a badge wallet to go with it so I could have my badge with my GBFans ID card:

![image](http://www.gbfans.com/images/pb/cowbybill/ALIM1832.jpg)

And finally since I’m going to Wondercon and wanted a way to place the badge and the wondercon badge together I picked up one of these:

![image](http://www.gbfans.com/images/pb/cowbybill/wallet.jpg)

The place I ordered the badge from was [BadgeandWallet.com](http://BadgeandWallet.com) and cost approx $80.00 and 15.00 for the wallet.

I found the badge holder at a surplus store for $10.00. You need to be sure to tell them not to include a shield on the badge so you can put a GB logo there. The number on the bottom is the month and year I was born.

And of course the GBFans ID card was purchased through AJ and the site.

Like I said if I could remember who did this I would want to thank them. I’m really happy the way it came out.

---

<div class="post-metadata">

**Author:** ![Some\_Guy](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/s/439d5e/32.png) [@Some\_Guy](https://forum.gbfans.com/u/Some_Guy)\
**Post date:** [March 29, 2011, 1:38am UTC](https://forum.gbfans.com/t/id-badges-and-holders/13797/2 "2011-03-29T01:38:18Z")

</div>

hawaiiangb originally came up with the idea:

![image](http://www.gbfans.com/images/fans/props/2104_1184869160.jpg)

The only custom badge I have is for my RPD Uniform :B

![image](http://farm4.static.flickr.com/3553/3370555857_c3cab790b3.jpg)

---

<div class="post-metadata">

**Author:** ![cowbybill](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/c/6bbea6/32.png) [@cowbybill](https://forum.gbfans.com/u/cowbybill)\
**Post date:** [March 29, 2011, 1:56am UTC](https://forum.gbfans.com/t/id-badges-and-holders/13797/3 "2011-03-29T01:56:08Z")

</div>

> [@Some\_Guy](#):
>
> hawaiiangb originally came up with the idea:

Thanks for giving Hawaiiangb the shout out 😃

I like to give proper credit for these things. I simply could not remember who it was

---

<div class="post-metadata">

**Author:** ![Captain\_SAMerica](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/c/b5e925/32.png) [@Captain\_SAMerica](https://forum.gbfans.com/u/Captain_SAMerica)\
**Post date:** [March 29, 2011, 4:50am UTC](https://forum.gbfans.com/t/id-badges-and-holders/13797/4 "2011-03-29T04:50:01Z")

</div>

I saw this badge today in person and it is AWESOME!

Nice job Bill & Sidney, those badges looks great! ![image](http://boards.collectors-society.com/images/graemlins/default/thumbsup2.gif)

---

<div class="post-metadata">

**Author:** ![cowbybill](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/c/6bbea6/32.png) [@cowbybill](https://forum.gbfans.com/u/cowbybill)\
**Post date:** [March 29, 2011, 8:37pm UTC](https://forum.gbfans.com/t/id-badges-and-holders/13797/5 "2011-03-29T20:37:43Z")

</div>

Thanks Sam..Wondercon is gonna be a blast! I gotta keep my credit cards at home though I’m sure there’s going to be a boatload of stuff there!

---

<div class="post-metadata">

**Author:** ![lumokan](https://forum.gbfans.com/user_avatar/forum.gbfans.com/lumokan/32/12043_2.png) [@lumokan](https://forum.gbfans.com/u/lumokan)\
**Post date:** [May 1, 2011, 1:36am UTC](https://forum.gbfans.com/t/id-badges-and-holders/13797/6 "2011-05-01T01:36:54Z")

</div>

I got one too. TOTALLY stole hawaiiangb’s idea and design. Good for undercover bustin’.

![image](http://www.gbfans.com/images/pb/team180b/DSC02522.jpg)

---

<div class="post-metadata">

**Author:** ![slimershomie](https://forum.gbfans.com/user_avatar/forum.gbfans.com/slimershomie/32/5941_2.png) [@slimershomie](https://forum.gbfans.com/u/slimershomie)\
**Post date:** [August 29, 2011, 7:28am UTC](https://forum.gbfans.com/t/id-badges-and-holders/13797/7 "2011-08-29T07:28:42Z")

</div>

Would there be any legal issues with these? …cause i kinda want one now.

---

<div class="post-metadata">

**Author:** ![lumokan](https://forum.gbfans.com/user_avatar/forum.gbfans.com/lumokan/32/12043_2.png) [@lumokan](https://forum.gbfans.com/u/lumokan)\
**Post date:** [August 29, 2011, 12:44pm UTC](https://forum.gbfans.com/t/id-badges-and-holders/13797/8 "2011-08-29T12:44:50Z")

</div>

> [@slimershomie](#):
>
> Would there be any legal issues with these? …cause i kinda want one now.

There wouldn’t be. It is illegal to impersonate a Police officer, Fire officer etc. but having a “prop” for novelty purposes of a COMPLETELY fictional and no-chance-of-existing movie company is fine.

---

<div class="post-metadata">

**Author:** ![Gareee](https://forum.gbfans.com/user_avatar/forum.gbfans.com/gareee/32/5994_2.png) [@Gareee](https://forum.gbfans.com/u/Gareee)\
**Post date:** [August 29, 2011, 12:56pm UTC](https://forum.gbfans.com/t/id-badges-and-holders/13797/9 "2011-08-29T12:56:38Z")

</div>

I picked up the pin almost 2 years ago planning on using it to make a badge. Which design is that, and from which website?

I always think of this too late to be delivered in time for an event.

---

<div class="post-metadata">

**Author:** ![lumokan](https://forum.gbfans.com/user_avatar/forum.gbfans.com/lumokan/32/12043_2.png) [@lumokan](https://forum.gbfans.com/u/lumokan)\
**Post date:** [August 29, 2011, 1:17pm UTC](https://forum.gbfans.com/t/id-badges-and-holders/13797/10 "2011-08-29T13:17:57Z")

</div>

HawaiianGB, (it looks like) cowboybill and I all used [http://www.thefirestore.com/store/buildit.cfm?bisibi\_type=1](http://www.thefirestore.com/store/buildit.cfm?bisibi_type=1).

(Unfortunately I can’t direct link on that site) so go to:

-Smith and Warren

-Eagle tops group 1

-TFSS528

I got the nickel with soft enamel, block, red text.

I bought it at the same time as the “perfect fit” badge wallet. Also! You’ll notice when you put the badge together that you have to select a seal to go in the middle. Select any free one and when you get the badge put it over the steam of the kettle to melt the glue a bit and jimmy it off - that’s what I did.

Definitely worth getting, such a cool and not-so-common prop to have.

---

<div class="post-metadata">

**Author:** ![Gareee](https://forum.gbfans.com/user_avatar/forum.gbfans.com/gareee/32/5994_2.png) [@Gareee](https://forum.gbfans.com/u/Gareee)\
**Post date:** [August 29, 2011, 3:06pm UTC](https://forum.gbfans.com/t/id-badges-and-holders/13797/11 "2011-08-29T15:06:09Z")

</div>

Thanks! I was at the store a few months ago, and couldn’t locate that same badge. That will help!

Did you select the duo tone?

---

<div class="post-metadata">

**Author:** ![kaison](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/k/e79b87/32.png) [@kaison](https://forum.gbfans.com/u/kaison)\
**Post date:** [March 29, 2012, 11:30pm UTC](https://forum.gbfans.com/t/id-badges-and-holders/13797/12 "2012-03-29T23:30:08Z")

</div>

Here’s mine:

![image](http://www.gbfans.com/images/fans/props/4335_4347907817.jpg)

![image](http://www.gbfans.com/images/fans/props/4335_7120861394.jpg)

---

<div class="post-metadata">

**Author:** ![cowbybill](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/c/6bbea6/32.png) [@cowbybill](https://forum.gbfans.com/u/cowbybill)\
**Post date:** [March 29, 2012, 11:54pm UTC](https://forum.gbfans.com/t/id-badges-and-holders/13797/13 "2012-03-29T23:54:58Z")

</div>

It’s funny I was this on my Alice frame strap on my shoulder and It’s usually the first thing people comment on:

![image](http://www.gbfans.com/images/pb/cowbybill/199190_10150155437809382_825339381_6542940_2012906_n.jpg)

---

<div class="post-metadata">

**Author:** ![Cardboard\_Buster](https://forum.gbfans.com/user_avatar/forum.gbfans.com/cardboard_buster/32/6398_2.png) [@Cardboard\_Buster](https://forum.gbfans.com/u/Cardboard_Buster)\
**Post date:** [April 7, 2012, 1:53pm UTC](https://forum.gbfans.com/t/id-badges-and-holders/13797/14 "2012-04-07T13:53:14Z")

</div>

Where do you get badges from? You all seem to have the same kind: longer than it is wide with an eagle on top. Is that a standard costume badge?

Also how did you customize it to say “Ghostbusters Paranormal Investigations and Eliminations” ?

---

<div class="post-metadata">

**Author:** ![Gareee](https://forum.gbfans.com/user_avatar/forum.gbfans.com/gareee/32/5994_2.png) [@Gareee](https://forum.gbfans.com/u/Gareee)\
**Post date:** [April 7, 2012, 2:07pm UTC](https://forum.gbfans.com/t/id-badges-and-holders/13797/15 "2012-04-07T14:07:09Z")

</div>

This is where I was directed to for the badges. They make them custom for you. The logo in the middle is a vintage pin that shows up on ebay every now and then.

[http://www.thefirestore.com/store/buildit.cfm?CFID=1809559&CFTOKEN=11823380&jsessionid=ee30990818102b511755TR](http://www.thefirestore.com/store/buildit.cfm?CFID=1809559&CFTOKEN=11823380&jsessionid=ee30990818102b511755TR)

BTW, That link was reposted four posts above yours.

---

<div class="post-metadata">

**Author:** ![Some\_Guy](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/s/439d5e/32.png) [@Some\_Guy](https://forum.gbfans.com/u/Some_Guy)\
**Post date:** [April 7, 2012, 4:10pm UTC](https://forum.gbfans.com/t/id-badges-and-holders/13797/16 "2012-04-07T16:10:47Z")

</div>

Also, remember guys.

That website is a company that makes badges for real EMTs, Police Officers, and Fire Fighters; don’t flood them with Ghostbusters Badge requests - they might remove the ability to make customized badges if you overwhelm them.

---

<div class="post-metadata">

**Author:** ![cowbybill](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/c/6bbea6/32.png) [@cowbybill](https://forum.gbfans.com/u/cowbybill)\
**Post date:** [April 7, 2012, 4:55pm UTC](https://forum.gbfans.com/t/id-badges-and-holders/13797/17 "2012-04-07T16:55:43Z")

</div>

I got mine from here:

[http://www.badgeandwallet.com/](http://www.badgeandwallet.com/)

I had them leave the center empty so I could place the pin in there. When they called to confirm my order I explained why I wanted the seal left empty and the guy on the phone thought it was pretty cool (this was a year ago mind you).

Also just want to thank HawaiianGB again for the inspiration to do this, without his post I would not have thought to have one made.

---

<div class="post-metadata">

**Author:** ![GoraK-11](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/g/6bbea6/32.png) [@GoraK-11](https://forum.gbfans.com/u/GoraK-11)\
**Post date:** [January 29, 2013, 1:39pm UTC](https://forum.gbfans.com/t/id-badges-and-holders/13797/18 "2013-01-29T13:39:31Z")

</div>

nice custom job.

where did you source the GB logo for the centre piece?

is there a site which makes them or was it a ebay find?

---

<div class="post-metadata">

**Author:** ![Gareee](https://forum.gbfans.com/user_avatar/forum.gbfans.com/gareee/32/5994_2.png) [@Gareee](https://forum.gbfans.com/u/Gareee)\
**Post date:** [January 29, 2013, 2:29pm UTC](https://forum.gbfans.com/t/id-badges-and-holders/13797/19 "2013-01-29T14:29:48Z")

</div>

We mentioned the enamel pin several times in the thread. I got mine off ebay UK.

---

<div class="post-metadata">

**Author:** ![cowbybill](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/c/6bbea6/32.png) [@cowbybill](https://forum.gbfans.com/u/cowbybill)\
**Post date:** [January 29, 2013, 5:27pm UTC](https://forum.gbfans.com/t/id-badges-and-holders/13797/20 "2013-01-29T17:27:06Z")

</div>

I just searched for Ghostbusters enamel pin on ebay it they came up, got it pretty cheap too

[Next page](https://forum.gbfans.com/t/id-badges-and-holders/13797.md?page=2)
