# Joeluna33 3/4 Scale RGB Pack Build by mr0072003

**URL:** <https://forum.gbfans.com/t/joeluna33-3-4-scale-rgb-pack-build-by-mr0072003/3120>\
**Category:** Proton Packs\
**Created:** [April 11, 2013, 2:44am UTC](https://forum.gbfans.com/t/joeluna33-3-4-scale-rgb-pack-build-by-mr0072003/3120 "2013-04-11T02:44:37Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![mr0072003](https://forum.gbfans.com/user_avatar/forum.gbfans.com/mr0072003/32/4026_2.png) [@mr0072003](https://forum.gbfans.com/u/mr0072003)\
**Post date:** [April 11, 2013, 2:44am UTC](https://forum.gbfans.com/t/joeluna33-3-4-scale-rgb-pack-build-by-mr0072003/3120/1 "2013-04-11T02:44:37Z")

</div>

Ok guys, now that my Movie Pack is pretty much done I needed another project. So why not give

a nod to one of my favorite cartoons [The Real Ghostbusters](https://www.gbfans.com/wiki/games/the-real-ghostbusters-activison). My wife showed some intrest in

being a Ghost buster, so I thought the 3/4 scale made by joeluna33 would be a great pack

for the wife. She is small enough that it would look to scale for her and would not be as heavy

as a full size pack.

So first things first was to get the Shell. Love this shell and the quality is TOP NOTCH!

Here is what I got:

![image]([http://www.gbfans.com/images/pb/pvellos/Ghost](http://www.gbfans.com/images/pb/pvellos/Ghost) Busters\_RGB Pack\_IMG\_2394\_zps9848d67a.jpg)

First thing I did was create a [motherboard](https://www.gbfans.com/wiki/equipment/proton-pack/motherboard). I used some MDF board that I got at OSH Hardware (about $5).

Using a Sharpie Marker i placed my shell over the MDF and traced out the shell

![image]([http://www.gbfans.com/images/pb/pvellos/Ghost](http://www.gbfans.com/images/pb/pvellos/Ghost) Busters\_RGB Pack\_IMG\_2395\_zpsbfae4dfd.jpg)

You can see it traced out nicely here.

![image]([http://www.gbfans.com/images/pb/pvellos/Ghost](http://www.gbfans.com/images/pb/pvellos/Ghost) Busters\_RGB Pack\_IMG\_2396\_zps47846002.jpg)

Using a Jig saw, I cut along the traced line.

![image]([http://www.gbfans.com/images/pb/pvellos/Ghost](http://www.gbfans.com/images/pb/pvellos/Ghost) Busters\_RGB Pack\_IMG\_1392\_zps91e7151a.jpg)

Whoala you have a mother board

![image]([http://www.gbfans.com/images/pb/pvellos/Ghost](http://www.gbfans.com/images/pb/pvellos/Ghost) Busters\_RGB Pack\_IMG\_2397\_zps38233d0f.jpg)

Now the Brackets

I used thes Corner braces. I figured since the pack is small these would work.

![image]([http://www.gbfans.com/images/pb/pvellos/Ghost](http://www.gbfans.com/images/pb/pvellos/Ghost) Busters\_RGB Pack\_IMG\_2398\_zpsbfdef622.jpg)

Drill your holes with a 7/32 drill bit. The holes on the brackets were to big for my method.

![image]([http://www.gbfans.com/images/pb/pvellos/Ghost](http://www.gbfans.com/images/pb/pvellos/Ghost) Busters\_RGB Pack\_IMG\_2400\_zps921a642d.jpg)

![image]([http://www.gbfans.com/images/pb/pvellos/Ghost](http://www.gbfans.com/images/pb/pvellos/Ghost) Busters\_RGB Pack\_IMG\_2401\_zpsc811bf76.jpg)

You will want to drill 3 more holes where the dimples are. You can see the dimples clearly in the pic above.

Your Bracket should end up looking like this. Here you can see that I drilled three holes.

![image]([http://www.gbfans.com/images/pb/pvellos/Ghost](http://www.gbfans.com/images/pb/pvellos/Ghost) Busters\_RGB Pack\_IMG\_2458\_zps2d7b3b33.jpg)

Now lets trace the bracket on the mother hole and mark the holes.

![image]([http://www.gbfans.com/images/pb/pvellos/Ghost](http://www.gbfans.com/images/pb/pvellos/Ghost) Busters\_RGB Pack\_IMG\_2461\_zpsfb7a58e4.jpg)

Drill Holes with the same 7/32 drill bit.

![image]([http://www.gbfans.com/images/pb/pvellos/Ghost](http://www.gbfans.com/images/pb/pvellos/Ghost) Busters\_RGB Pack\_IMG\_2462\_zps0abc66ad.jpg)

Using 3/16 5mm Pop Rivets I braced them to the motherboard.

![image]([http://www.gbfans.com/images/pb/pvellos/Ghost](http://www.gbfans.com/images/pb/pvellos/Ghost) Busters\_RGB Pack\_IMG\_2463\_zps221bcac0.jpg)

Did this in the best spots for me on the rest, you get the idea though. Here are some pics of that progress.

![image]([http://www.gbfans.com/images/pb/pvellos/Ghost](http://www.gbfans.com/images/pb/pvellos/Ghost) Busters\_RGB Pack\_IMG\_2465\_zps3d39312d.jpg)

![image]([http://www.gbfans.com/images/pb/pvellos/Ghost](http://www.gbfans.com/images/pb/pvellos/Ghost) Busters\_RGB Pack\_IMG\_2466\_zps79e287ed.jpg)

Now using kind123’s method of attaching mother boards, I did the same here. Here are some pics of that.

![image]([http://www.gbfans.com/images/pb/pvellos/Ghost](http://www.gbfans.com/images/pb/pvellos/Ghost) Busters\_RGB Pack\_IMG\_2400\_zps921a642d.jpg)

![image]([http://www.gbfans.com/images/pb/pvellos/Ghost](http://www.gbfans.com/images/pb/pvellos/Ghost) Busters\_RGB Pack\_IMG\_2402\_zps9f2a7b15.jpg)

![image]([http://www.gbfans.com/images/pb/pvellos/Ghost](http://www.gbfans.com/images/pb/pvellos/Ghost) Busters\_RGB Pack\_IMG\_1417\_zps754aef6a.jpg)

Next up was the, what I like to call the HGA, but who knows. I used some 2inc in lenght and Diamter (i think)

PVC tube and using the left over MDF, traced out some circles and cut them using the Jig saw. Once I did that

I used JB weld, to glue them to the PVC pipe.

![image]([http://www.gbfans.com/images/pb/pvellos/Ghost](http://www.gbfans.com/images/pb/pvellos/Ghost) Busters\_RGB Pack\_IMG\_2414\_zpsbd880a3f.jpg)

![image]([http://www.gbfans.com/images/pb/pvellos/Ghost](http://www.gbfans.com/images/pb/pvellos/Ghost) Busters\_RGB Pack\_IMG\_2415\_zps56c2cb06.jpg)

![image]([http://www.gbfans.com/images/pb/pvellos/Ghost](http://www.gbfans.com/images/pb/pvellos/Ghost) Busters\_RGB Pack\_IMG\_2420\_zpsf4f34826.jpg)

![image]([http://www.gbfans.com/images/pb/pvellos/Ghost](http://www.gbfans.com/images/pb/pvellos/Ghost) Busters\_RGB Pack\_IMG\_2422\_zps8d5a1dc5.jpg)

Now to what I call the “[Booster Tube](https://www.gbfans.com/wiki/equipment/proton-pack/booster-tube)”. Again I used some PVC Pipe that was to scale, sorry guys dont know

what size I used. Then got a Funnel that was the right size. get a 4 pack of 4 sizes for 1.50 at Frieght and Harbor.

Found the best size and fit it through.

![image]([http://www.gbfans.com/images/pb/pvellos/Ghost](http://www.gbfans.com/images/pb/pvellos/Ghost) Busters\_RGB Pack\_IMG\_2407\_zpsdb2c7da3.jpg)

![image]([http://www.gbfans.com/images/pb/pvellos/Ghost](http://www.gbfans.com/images/pb/pvellos/Ghost) Busters\_RGB Pack\_IMG\_2408\_zps87144154.jpg)

Cut the tip off and Hot Glue in place.

![image]([http://www.gbfans.com/images/pb/pvellos/Ghost](http://www.gbfans.com/images/pb/pvellos/Ghost) Busters\_RGB Pack\_IMG\_2431\_zps03d38a9e.jpg)

Useing some Bondo Filler, clean up the mess. Sand down as necessary.

![image]([http://www.gbfans.com/images/pb/pvellos/Ghost](http://www.gbfans.com/images/pb/pvellos/Ghost) Busters\_RGB Pack\_IMG\_2432\_zps027779d2.jpg)

![image]([http://www.gbfans.com/images/pb/pvellos/Ghost](http://www.gbfans.com/images/pb/pvellos/Ghost) Busters\_RGB Pack\_IMG\_2433\_zps04b7c7c7.jpg)

Now attaching the Tube to the shell. I used 2 U shape brackets and drilled holes in the PRE-DESIGNATED spots

already on the Shell 🙂 .

![image]([http://www.gbfans.com/images/pb/pvellos/Ghost](http://www.gbfans.com/images/pb/pvellos/Ghost) Busters\_RGB Pack\_DBE8D68B-2D8F-451B-AA92-087230A57CE8-1960-000002091BDCF517\_zps6ce3b1c0.jpg)

![image]([http://www.gbfans.com/images/pb/pvellos/Ghost](http://www.gbfans.com/images/pb/pvellos/Ghost) Busters\_RGB Pack\_IMG\_2410\_zps13dee255.jpg)

![image]([http://www.gbfans.com/images/pb/pvellos/Ghost](http://www.gbfans.com/images/pb/pvellos/Ghost) Busters\_RGB Pack\_IMG\_2411\_zpscbd3321a.jpg)

This pic was before the funnel tip was cut off. But i used 1/4 nuts in the back to hold them down.

![image]([http://www.gbfans.com/images/pb/pvellos/Ghost](http://www.gbfans.com/images/pb/pvellos/Ghost) Busters\_RGB Pack\_IMG\_2413\_zpse654cf86.jpg)

cosmetic

![image]([http://www.gbfans.com/images/pb/pvellos/Ghost](http://www.gbfans.com/images/pb/pvellos/Ghost) Busters\_RGB Pack\_IMG\_2429\_zpsc256d630.jpg)

![image]([http://www.gbfans.com/images/pb/pvellos/Ghost](http://www.gbfans.com/images/pb/pvellos/Ghost) Busters\_RGB Pack\_IMG\_2439\_zps0d22d795.jpg)

![image]([http://www.gbfans.com/images/pb/pvellos/Ghost](http://www.gbfans.com/images/pb/pvellos/Ghost) Busters\_RGB Pack\_IMG\_2440\_zps3fe7b63e.jpg)

Holes for the Tubing..attaching HGA…

![image]([http://www.gbfans.com/images/pb/pvellos/Ghost](http://www.gbfans.com/images/pb/pvellos/Ghost) Busters\_RGB Pack\_IMG\_2424\_zps3f959de1.jpg)

![image]([http://www.gbfans.com/images/pb/pvellos/Ghost](http://www.gbfans.com/images/pb/pvellos/Ghost) Busters\_RGB Pack\_IMG\_2441\_zps4db6b916.jpg)

Next I got a L tube and added that to the top part of the Tubing..

![image]([http://www.gbfans.com/images/pb/pvellos/Ghost](http://www.gbfans.com/images/pb/pvellos/Ghost) Busters\_RGB Pack\_2C3CA9BC-BA1C-4A57-B6A4-FD9227FB9CCD-1960-0000020939818B5C\_zps148af918.jpg)

using a Rubber gromet in both places to hold it in.

![image]([http://www.gbfans.com/images/pb/pvellos/Ghost](http://www.gbfans.com/images/pb/pvellos/Ghost) Busters\_RGB Pack\_IMG\_2449\_zps493dac6f.jpg)

![image]([http://www.gbfans.com/images/pb/pvellos/Ghost](http://www.gbfans.com/images/pb/pvellos/Ghost) Busters\_RGB Pack\_IMG\_2451\_zpsa19317ef.jpg)

![image]([http://www.gbfans.com/images/pb/pvellos/Ghost](http://www.gbfans.com/images/pb/pvellos/Ghost) Busters\_RGB Pack\_IMG\_2453\_zps53782e54.jpg)

![image]([http://www.gbfans.com/images/pb/pvellos/Ghost](http://www.gbfans.com/images/pb/pvellos/Ghost) Busters\_RGB Pack\_IMG\_2455\_zps66f443dc.jpg)

Lights/switches added, Tubing with Clippard barbs, Push button added to the pack

![image]([http://www.gbfans.com/images/pb/pvellos/Ghost](http://www.gbfans.com/images/pb/pvellos/Ghost) Busters\_RGB Pack\_IMG\_2467\_zpsec3bc666.jpg)

![image]([http://www.gbfans.com/images/pb/pvellos/Ghost](http://www.gbfans.com/images/pb/pvellos/Ghost) Busters\_RGB Pack\_IMG\_1404\_zps60e85cd2.jpg)

![image]([http://www.gbfans.com/images/pb/pvellos/Ghost](http://www.gbfans.com/images/pb/pvellos/Ghost) Busters\_RGB Pack\_IMG\_1405\_zps62c0cb29.jpg)

Created my [Bumper](https://www.gbfans.com/wiki/equipment/proton-pack/bumper), added the Shock Mount and used some HOt Glue to Hold the Tubing in place. (Use Vasoline on the tubing when gluing the tube in the hole, this will help the tube to come out once its ready for paint.)

![image]([http://www.gbfans.com/images/pb/pvellos/Ghost](http://www.gbfans.com/images/pb/pvellos/Ghost) Busters\_RGB Pack\_IMG\_1427\_zps9a095d40.jpg)

So here is where I am now… You may notice that I have not mentioned the light on the top, as its wrong and realized that this should be a Gauge not a light with a metal peice on the bottom. If you look out our Reference pic of the RGB drawings, it looks like this, but thanks to the experts I was made aware that its a guage… so off to hunting for the right guage.

![image]([http://www.gbfans.com/images/pb/pvellos/Ghost](http://www.gbfans.com/images/pb/pvellos/Ghost) Busters\_RGB Pack\_IMG\_1426\_zps78e2091e.jpg)

---

<div class="post-metadata">

**Author:** ![Darthdono74](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/d/779978/32.png) [@Darthdono74](https://forum.gbfans.com/u/Darthdono74)\
**Post date:** [April 11, 2013, 4:29am UTC](https://forum.gbfans.com/t/joeluna33-3-4-scale-rgb-pack-build-by-mr0072003/3120/2 "2013-04-11T04:29:04Z")

</div>

Looking great, love the texture on that shell 😉

---

<div class="post-metadata">

**Author:** ![kingpin](https://forum.gbfans.com/user_avatar/forum.gbfans.com/kingpin/32/188026_2.png) [@kingpin](https://forum.gbfans.com/u/kingpin)\
**Post date:** [April 11, 2013, 10:26am UTC](https://forum.gbfans.com/t/joeluna33-3-4-scale-rgb-pack-build-by-mr0072003/3120/3 "2013-04-11T10:26:15Z")

</div>

Looking good so far, the only elements I’ll remark on are that I believe the yellow tank that’s surrounded by the hose is only hemispherical, rather than a full sphere on the cross section. The other element is that if you’re able to get a hold of it, some flexible metal conduit should replicate the hose that surrounds the yellow tank (and the the hose that runs along the front half of the Proton Gun) better in terms of the visual appearance than the black split-loom.

Are you planning to give it a movie colour scheme, or try remain true to the cartoon?

---

<div class="post-metadata">

**Author:** ![Nboucher2392](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/n/8e7dd6/32.png) [@Nboucher2392](https://forum.gbfans.com/u/Nboucher2392)\
**Post date:** [April 11, 2013, 2:49pm UTC](https://forum.gbfans.com/t/joeluna33-3-4-scale-rgb-pack-build-by-mr0072003/3120/4 "2013-04-11T14:49:42Z")

</div>

looking good. I love my RGB pack alot. definately a fun build and its awesome to see another one being put together. I built my own light kit for mine and it works awesome. If you need any advice on the thrower or anything with the build i am more than happy to give ya some input.

---

<div class="post-metadata">

**Author:** ![mr0072003](https://forum.gbfans.com/user_avatar/forum.gbfans.com/mr0072003/32/4026_2.png) [@mr0072003](https://forum.gbfans.com/u/mr0072003)\
**Post date:** [April 11, 2013, 2:53pm UTC](https://forum.gbfans.com/t/joeluna33-3-4-scale-rgb-pack-build-by-mr0072003/3120/5 "2013-04-11T14:53:30Z")

</div>

> [@Kingpin](#):
>
> Looking good so far, the only elements I’ll remark on are that I believe the yellow tank that’s surrounded by the hose is only hemispherical, rather than a full sphere on the cross section. The other element is that if you’re able to get a hold of it, some flexible metal conduit should replicate the hose that surrounds the yellow tank (and the the hose that runs along the front half of the Proton Gun) better in terms of the visual appearance than the black split-loom.
> 
> Are you planning to give it a movie colour scheme, or try remain true to the cartoon?

Hahaha… Kingpin we were on the same track as far as the metal Conduit. I actually bought some of it. some thick and thin stuff, but the conduit is not flexiable enough to wrap around the HGA as it breaks before I can get a good enough bend on it. I may try playing with it later. If this does not work I will be painting the split loom to look metal like.

As for the Color… thats a big debate in my house right now. I really want to give it a real color scheme…BUT the wife really wants a theme pack (i.e HK, or some sort of Sanrio element… :whatever: But I really want to try and nail down a realiztic version of this pack!

---

<div class="post-metadata">

**Author:** ![mr0072003](https://forum.gbfans.com/user_avatar/forum.gbfans.com/mr0072003/32/4026_2.png) [@mr0072003](https://forum.gbfans.com/u/mr0072003)\
**Post date:** [April 11, 2013, 2:55pm UTC](https://forum.gbfans.com/t/joeluna33-3-4-scale-rgb-pack-build-by-mr0072003/3120/6 "2013-04-11T14:55:06Z")

</div>

> [@Nboucher2392](#):
>
> looking good. I love my RGB pack alot. definately a fun build and its awesome to see another one being put together. I built my own light kit for mine and it works awesome. If you need any advice on the thrower or anything with the build i am more than happy to give ya some input.

That would be great. Your thread was one I tried looking at for research, but your links were broken.

---

<div class="post-metadata">

**Author:** ![Nboucher2392](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/n/8e7dd6/32.png) [@Nboucher2392](https://forum.gbfans.com/u/Nboucher2392)\
**Post date:** [April 11, 2013, 2:57pm UTC](https://forum.gbfans.com/t/joeluna33-3-4-scale-rgb-pack-build-by-mr0072003/3120/7 "2013-04-11T14:57:51Z")

</div>

awwww, i see your point. i did some spring cleaning to my photobucket account and did not realize the links got all messed up. Thanks for the heads up.

---

<div class="post-metadata">

**Author:** ![Nboucher2392](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/n/8e7dd6/32.png) [@Nboucher2392](https://forum.gbfans.com/u/Nboucher2392)\
**Post date:** [April 11, 2013, 4:23pm UTC](https://forum.gbfans.com/t/joeluna33-3-4-scale-rgb-pack-build-by-mr0072003/3120/8 "2013-04-11T16:23:29Z")

</div>

i readded all the pictures back to that post. You can check em out now. They are all in the last post. the second to last picture is actually a video of the lights working in the pack so you just need to click the picture to see the video.

---

<div class="post-metadata">

**Author:** ![mr0072003](https://forum.gbfans.com/user_avatar/forum.gbfans.com/mr0072003/32/4026_2.png) [@mr0072003](https://forum.gbfans.com/u/mr0072003)\
**Post date:** [April 13, 2013, 8:40pm UTC](https://forum.gbfans.com/t/joeluna33-3-4-scale-rgb-pack-build-by-mr0072003/3120/9 "2013-04-13T20:40:23Z")

</div>

OK guys, a little update from my work the past few days.

ALICE Suspenders attached and added.

[![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters\_RGB Pack\_209519D3-59E2-4F90-B411-DEB87B66E311-2260-000001B511D79AA1\_zpsdae4926b.jpg)](http://s44.photobucket.com/user/pvellos/media/Ghost%20Busters/RGB%20Pack/209519D3-59E2-4F90-B411-DEB87B66E311-2260-000001B511D79AA1_zpsdae4926b.jpg.html)

Red light added to the top of the pack. I was going to use the Trap lights for this, but I felt it was too small and got lost on the pack. Went to Radio Shack and got something a little bigger.

[![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters\_RGB Pack\_IMG\_1442\_zpsb32de6fe.jpg)](http://s44.photobucket.com/user/pvellos/media/Ghost%20Busters/RGB%20Pack/IMG_1442_zpsb32de6fe.jpg.html)

Next up was the part that goes on the side of the pack. I have watched a few episodes recently and still not sure if its a light or not. I decided to take some liberty in making my own touch to the pack and making it a fuse holder. WDYT?

[![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters\_RGB Pack\_IMG\_1443\_zpsb452586a.jpg)](http://s44.photobucket.com/user/pvellos/media/Ghost%20Busters/RGB%20Pack/IMG_1443_zpsb452586a.jpg.html)

Finally I got rid of the light on the top right of pack and added a Guage. Cool thing about it, is that it was like $5 and it says slime on it. I will be adding some red Gel over it to get the red look later.

[![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters\_RGB Pack\_IMG\_1444\_zps05d11d73.jpg)](http://s44.photobucket.com/user/pvellos/media/Ghost%20Busters/RGB%20Pack/IMG_1444_zps05d11d73.jpg.html)

---

<div class="post-metadata">

**Author:** ![PlayswithSquirels](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/p/8e7dd6/32.png) [@PlayswithSquirels](https://forum.gbfans.com/u/PlayswithSquirels)\
**Post date:** [April 14, 2013, 1:11am UTC](https://forum.gbfans.com/t/joeluna33-3-4-scale-rgb-pack-build-by-mr0072003/3120/10 "2013-04-14T01:11:14Z")

</div>

That’s looking awesome so far. I think the fuse holder was a nice choice and looks like it fits the pack perfectly.

---

<div class="post-metadata">

**Author:** ![Silverstreak](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/s/e56c9b/32.png) [@Silverstreak](https://forum.gbfans.com/u/Silverstreak)\
**Post date:** [April 15, 2013, 12:58pm UTC](https://forum.gbfans.com/t/joeluna33-3-4-scale-rgb-pack-build-by-mr0072003/3120/11 "2013-04-15T12:58:01Z")

</div>

Looking great so far.

---

<div class="post-metadata">

**Author:** ![Nboucher2392](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/n/8e7dd6/32.png) [@Nboucher2392](https://forum.gbfans.com/u/Nboucher2392)\
**Post date:** [April 15, 2013, 3:20pm UTC](https://forum.gbfans.com/t/joeluna33-3-4-scale-rgb-pack-build-by-mr0072003/3120/12 "2013-04-15T15:20:58Z")

</div>

I agree the fuse holder is a nice touch. The gage is pretty nice to. I am actually going to be changing my gage out and some point when i build a modern style RGB pack. My pack right now, the gage i have is actually connected to the batteries i use an displays the current voltage. When my plan for my Modern RGB pack is use a digital volt meter they use for the street racers. Its actually pretty nice cause its round hand its the same size. But thats later on. I am truly digging your build so far.

---

<div class="post-metadata">

**Author:** ![Matt\_Campbell](https://forum.gbfans.com/user_avatar/forum.gbfans.com/matt_campbell/32/5853_2.png) [@Matt\_Campbell](https://forum.gbfans.com/u/Matt_Campbell)\
**Post date:** [April 16, 2013, 3:25am UTC](https://forum.gbfans.com/t/joeluna33-3-4-scale-rgb-pack-build-by-mr0072003/3120/13 "2013-04-16T03:25:01Z")

</div>

I bought one of these off of Joe as well to build for my son and I just received it in the mail today, I’ll keep an eye on this thread and will eventually start one of my own as I start to build mine.

---

<div class="post-metadata">

**Author:** ![mr0072003](https://forum.gbfans.com/user_avatar/forum.gbfans.com/mr0072003/32/4026_2.png) [@mr0072003](https://forum.gbfans.com/u/mr0072003)\
**Post date:** [April 16, 2013, 5:51am UTC](https://forum.gbfans.com/t/joeluna33-3-4-scale-rgb-pack-build-by-mr0072003/3120/14 "2013-04-16T05:51:38Z")

</div>

Great to hear Matt, Joe’s stuff is great you will find the pack is a breez to work with!

---

<div class="post-metadata">

**Author:** ![mr0072003](https://forum.gbfans.com/user_avatar/forum.gbfans.com/mr0072003/32/4026_2.png) [@mr0072003](https://forum.gbfans.com/u/mr0072003)\
**Post date:** [April 19, 2013, 3:27pm UTC](https://forum.gbfans.com/t/joeluna33-3-4-scale-rgb-pack-build-by-mr0072003/3120/15 "2013-04-19T15:27:24Z")

</div>

Small update on the pack…

I have switched out the ugly Pep Boys Horn Button for a more authentic looking one while still trying to keep the generel RGB be look down. I sadly got the wrong color shipped to me from the buyer, but I can paint the color I need when I begin to paint. I also added the Red Gel over the gauge. Many put it on the bottom, but my version will have on the top. I have seen to many pics and references that when the red does show up on the packs, its either a full red or the top shows red while the bottom is black. So I opted for what you see in the pic below. You can still see the word Slime this way too 🆒

For now enjoy!

[![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters\_RGB Pack\_D693CBA8-7D64-4485-83B0-C2E471DE71B0-336-0000007B91C83946\_zpsf010a4a9.jpg)](http://s44.photobucket.com/user/pvellos/media/Ghost%20Busters/RGB%20Pack/D693CBA8-7D64-4485-83B0-C2E471DE71B0-336-0000007B91C83946_zpsf010a4a9.jpg.html)

[![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters\_RGB Pack\_81643675-04C9-40FE-8C33-5A235E79A1E0-336-0000007B98B8EB7E\_zps04573520.jpg)](http://s44.photobucket.com/user/pvellos/media/Ghost%20Busters/RGB%20Pack/81643675-04C9-40FE-8C33-5A235E79A1E0-336-0000007B98B8EB7E_zps04573520.jpg.html)

EDIT -

Here are some close ups of the gauge with RED Gel. I did it both ways…which way looks better?

On top

[![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters\_RGB Pack\_F4CDC038-0B5D-4639-81E3-751A81596AE7-336-0000007B39607A41\_zpse5d6d555.jpg)](http://s44.photobucket.com/user/pvellos/media/Ghost%20Busters/RGB%20Pack/F4CDC038-0B5D-4639-81E3-751A81596AE7-336-0000007B39607A41_zpse5d6d555.jpg.html)

Or Bottom!

[![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters\_RGB Pack\_8C48E9F8-2C90-4197-8419-B78D05798848-336-0000007B346B6208\_zps81aeeded.jpg)](http://s44.photobucket.com/user/pvellos/media/Ghost%20Busters/RGB%20Pack/8C48E9F8-2C90-4197-8419-B78D05798848-336-0000007B346B6208_zps81aeeded.jpg.html)

---

<div class="post-metadata">

**Author:** ![Matt\_Campbell](https://forum.gbfans.com/user_avatar/forum.gbfans.com/matt_campbell/32/5853_2.png) [@Matt\_Campbell](https://forum.gbfans.com/u/Matt_Campbell)\
**Post date:** [April 19, 2013, 11:47pm UTC](https://forum.gbfans.com/t/joeluna33-3-4-scale-rgb-pack-build-by-mr0072003/3120/16 "2013-04-19T23:47:27Z")

</div>

I think the red on top looks good, I’d like to get my hands on one of those exact gages when I put my sons pack together where did you get yours from?

---

<div class="post-metadata">

**Author:** ![mr0072003](https://forum.gbfans.com/user_avatar/forum.gbfans.com/mr0072003/32/4026_2.png) [@mr0072003](https://forum.gbfans.com/u/mr0072003)\
**Post date:** [April 20, 2013, 4:37am UTC](https://forum.gbfans.com/t/joeluna33-3-4-scale-rgb-pack-build-by-mr0072003/3120/17 "2013-04-20T04:37:04Z")

</div>

I got it at Pep Boys… It was near the pen gauges!

---

<div class="post-metadata">

**Author:** ![Matt\_Campbell](https://forum.gbfans.com/user_avatar/forum.gbfans.com/matt_campbell/32/5853_2.png) [@Matt\_Campbell](https://forum.gbfans.com/u/Matt_Campbell)\
**Post date:** [April 20, 2013, 6:10am UTC](https://forum.gbfans.com/t/joeluna33-3-4-scale-rgb-pack-build-by-mr0072003/3120/18 "2013-04-20T06:10:32Z")

</div>

Hmmm, don’t know if we have Pep Boys in Canada. I’ll just have to keep my eyes open.

---

<div class="post-metadata">

**Author:** ![mr0072003](https://forum.gbfans.com/user_avatar/forum.gbfans.com/mr0072003/32/4026_2.png) [@mr0072003](https://forum.gbfans.com/u/mr0072003)\
**Post date:** [April 20, 2013, 3:28pm UTC](https://forum.gbfans.com/t/joeluna33-3-4-scale-rgb-pack-build-by-mr0072003/3120/19 "2013-04-20T15:28:01Z")

</div>

> [@Matt Campbell](#):
>
> Hmmm, don’t know if we have Pep Boys in Canada. I’ll just have to keep my eyes open.

Basically any auto parts store. Search for Slime Air Pressure Gauges on the interwebs!

---

<div class="post-metadata">

**Author:** ![Matt\_Campbell](https://forum.gbfans.com/user_avatar/forum.gbfans.com/matt_campbell/32/5853_2.png) [@Matt\_Campbell](https://forum.gbfans.com/u/Matt_Campbell)\
**Post date:** [April 20, 2013, 6:06pm UTC](https://forum.gbfans.com/t/joeluna33-3-4-scale-rgb-pack-build-by-mr0072003/3120/20 "2013-04-20T18:06:33Z")

</div>

> [@mr0072003](#):
>
> Basically any auto parts store. Search for Slime Air Pressure Gauges on the interwebs!

Cool, thanks for the assist!

[Next page](https://forum.gbfans.com/t/joeluna33-3-4-scale-rgb-pack-build-by-mr0072003/3120.md?page=2)
