# Just a question about Fiberglass Shells

**URL:** <https://forum.gbfans.com/t/just-a-question-about-fiberglass-shells/31048>\
**Category:** Proton Packs\
**Created:** [December 1, 2009, 12:35pm UTC](https://forum.gbfans.com/t/just-a-question-about-fiberglass-shells/31048 "2009-12-01T12:35:48Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![RedVirtue](https://forum.gbfans.com/user_avatar/forum.gbfans.com/redvirtue/32/6172_2.png) [@RedVirtue](https://forum.gbfans.com/u/RedVirtue)\
**Post date:** [December 1, 2009, 12:35pm UTC](https://forum.gbfans.com/t/just-a-question-about-fiberglass-shells/31048/1 "2009-12-01T12:35:48Z")

</div>

I have a fiberglass shell with excess material on the rims/ends. This stuff is tough. What do you guys like to use to cut the extra fiberglass? **Thanks for the help!**

---

<div class="post-metadata">

**Author:** ![loly2kn2](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/l/51bf81/32.png) [@loly2kn2](https://forum.gbfans.com/u/loly2kn2)\
**Post date:** [December 1, 2009, 1:31pm UTC](https://forum.gbfans.com/t/just-a-question-about-fiberglass-shells/31048/2 "2009-12-01T13:31:08Z")

</div>

Dremmel with cutting disc is a good way to go I think

Lawrence

---

<div class="post-metadata">

**Author:** ![RedVirtue](https://forum.gbfans.com/user_avatar/forum.gbfans.com/redvirtue/32/6172_2.png) [@RedVirtue](https://forum.gbfans.com/u/RedVirtue)\
**Post date:** [December 2, 2009, 12:17am UTC](https://forum.gbfans.com/t/just-a-question-about-fiberglass-shells/31048/3 "2009-12-02T00:17:59Z")

</div>

Thank you. If there are any other suggestions out there I’m all ears.

---

<div class="post-metadata">

**Author:** ![rimshot](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/r/d07c76/32.png) [@rimshot](https://forum.gbfans.com/u/rimshot)\
**Post date:** [December 2, 2009, 1:10am UTC](https://forum.gbfans.com/t/just-a-question-about-fiberglass-shells/31048/4 "2009-12-02T01:10:36Z")

</div>

You would probably be more apt to get answers if this topic was posted in the [Proton Pack](https://www.gbfans.com/wiki/equipment/proton-pack) section instead of the Wanted to Buy section. Maybe you should ask a mod to move it for you.

---

<div class="post-metadata">

**Author:** ![rimshot](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/r/d07c76/32.png) [@rimshot](https://forum.gbfans.com/u/rimshot)\
**Post date:** [December 2, 2009, 1:26am UTC](https://forum.gbfans.com/t/just-a-question-about-fiberglass-shells/31048/5 "2009-12-02T01:26:42Z")

</div>

Looks like they took care of moving it for you pretty quicklly 🙂 You should get some more answers here now. Although using a dremel really is probably the quickest and easiest way to do it.

---

<div class="post-metadata">

**Author:** ![Zack](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/z/f6c823/32.png) [@Zack](https://forum.gbfans.com/u/Zack)\
**Post date:** [December 2, 2009, 1:28am UTC](https://forum.gbfans.com/t/just-a-question-about-fiberglass-shells/31048/6 "2009-12-02T01:28:36Z")

</div>

> [@rimshot](#):
>
> Looks like they took care of moving it for you pretty quicklly 🙂

I’m always..on duty!

---

<div class="post-metadata">

**Author:** ![cpu64](https://forum.gbfans.com/user_avatar/forum.gbfans.com/cpu64/32/104792_2.png) [@cpu64](https://forum.gbfans.com/u/cpu64)\
**Post date:** [December 2, 2009, 6:18am UTC](https://forum.gbfans.com/t/just-a-question-about-fiberglass-shells/31048/7 "2009-12-02T06:18:56Z")

</div>

Hehe… duty..

You can use shears or tin snips if its thin enough, then sand the rest. Avoid sanding or dremel use as much as possible since it will have fiberglass flying in he air. So use a respirator (or at least a t shirt ninja mask) when sanding fiberglass.

---

<div class="post-metadata">

**Author:** ![RedVirtue](https://forum.gbfans.com/user_avatar/forum.gbfans.com/redvirtue/32/6172_2.png) [@RedVirtue](https://forum.gbfans.com/u/RedVirtue)\
**Post date:** [December 2, 2009, 9:14am UTC](https://forum.gbfans.com/t/just-a-question-about-fiberglass-shells/31048/8 "2009-12-02T09:14:54Z")

</div>

> [@CPU64](#):
>
> Hehe… duty..
> 
> You can use shears or tin snips if its thin enough, then sand the rest. Avoid sanding or dremel use as much as possible since it will have fiberglass flying in he air. So use a respirator (or at least a t shirt ninja mask) when sanding fiberglass.

Wow! “Important saftey tip. Thanks Egon.” 🆒

---

<div class="post-metadata">

**Author:** ![chibigear](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/c/65b543/32.png) [@chibigear](https://forum.gbfans.com/u/chibigear)\
**Post date:** [December 2, 2009, 11:43am UTC](https://forum.gbfans.com/t/just-a-question-about-fiberglass-shells/31048/9 "2009-12-02T11:43:25Z")

</div>

> [@RedVirtue](#):
>
> Wow! “Important saftey tip. Thanks Egon.” 🆒

It really is important. the dust that comes out when sanding fiberglass is resin and glass. Carcinogenic and very nasty in the long run if inhaled. Use a good respirator that catches small particles, you’ll love it. Also, as the fiberglass IS glass, it itches for ages if you get it into pores of exposed skin. Use protective clothing on your hands, I nearly clawed the skin out of my arms when I discovered this issue… I’ve later heard that someone has had some success with talcum powder in their hands to prevent the fiberglass dust from getting into the pores. Don’t know if it works, though.

Good luck with your pack. And, pics please..

---

<div class="post-metadata">

**Author:** ![mikenelson1982](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/m/858c86/32.png) [@mikenelson1982](https://forum.gbfans.com/u/mikenelson1982)\
**Post date:** [December 2, 2009, 11:03pm UTC](https://forum.gbfans.com/t/just-a-question-about-fiberglass-shells/31048/10 "2009-12-02T23:03:38Z")

</div>

I use a file from a set i got at lowes for 20.00 and it came with 8 big files and 12 tiny files for detail work

---

<div class="post-metadata">

**Author:** ![RedVirtue](https://forum.gbfans.com/user_avatar/forum.gbfans.com/redvirtue/32/6172_2.png) [@RedVirtue](https://forum.gbfans.com/u/RedVirtue)\
**Post date:** [December 3, 2009, 8:37am UTC](https://forum.gbfans.com/t/just-a-question-about-fiberglass-shells/31048/11 "2009-12-03T08:37:14Z")

</div>

Thanks guys! These are great tips, and yes I’ll post pics once the ball gets rollin’. 🆒

---

<div class="post-metadata">

**Author:** ![RedVirtue](https://forum.gbfans.com/user_avatar/forum.gbfans.com/redvirtue/32/6172_2.png) [@RedVirtue](https://forum.gbfans.com/u/RedVirtue)\
**Post date:** [December 4, 2009, 1:56pm UTC](https://forum.gbfans.com/t/just-a-question-about-fiberglass-shells/31048/12 "2009-12-04T13:56:25Z")

</div>

**One more question:** How do I cut the hole for the [power cell](https://www.gbfans.com/wiki/equipment/proton-pack/power-cell)?

---

<div class="post-metadata">

**Author:** ![abritinthebay](https://forum.gbfans.com/user_avatar/forum.gbfans.com/abritinthebay/32/208_2.png) [@abritinthebay](https://forum.gbfans.com/u/abritinthebay)\
**Post date:** [December 5, 2009, 9:58pm UTC](https://forum.gbfans.com/t/just-a-question-about-fiberglass-shells/31048/13 "2009-12-05T21:58:43Z")

</div>

You have two options

1. buy a hole cutter for that exact size.

2. Drill a hole in the middle and then use the dremels sanding wheel to sand the rest out. This is what I did and it took me about 10 mins to do all 4 nice and smooth. The sanding wheel on high speed goes through it like BUTTER.

---

<div class="post-metadata">

**Author:** ![Nerdy\_NotionZ](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/n/e8c25b/32.png) [@Nerdy\_NotionZ](https://forum.gbfans.com/u/Nerdy_NotionZ)\
**Post date:** [December 5, 2009, 10:04pm UTC](https://forum.gbfans.com/t/just-a-question-about-fiberglass-shells/31048/14 "2009-12-05T22:04:12Z")

</div>

> [@abritinthebay](#):
>
> You have two options
> 
> 1. buy a hole cutter for that exact size.
> 
> 2. Drill a hole in the middle and then use the dremels sanding wheel to sand the rest out. This is what I did and it took me about 10 mins to do all 4 nice and smooth. The sanding wheel on high speed goes through it like BUTTER.

He said powercell.

XD

I just used my cutting disc to cut out my window and then some sandpaper to clean up the edges

---

<div class="post-metadata">

**Author:** ![enchanted\_unicorn](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/c2a13f/32.png) [@enchanted\_unicorn](https://forum.gbfans.com/u/enchanted_unicorn)\
**Post date:** [December 5, 2009, 10:17pm UTC](https://forum.gbfans.com/t/just-a-question-about-fiberglass-shells/31048/15 "2009-12-05T22:17:30Z")

</div>

> [@CPU64](#):
>
> Hehe… duty..
> 
> You can use shears or tin snips if its thin enough, then sand the rest. Avoid sanding or dremel use as much as possible since it will have fiberglass flying in he air. So use a respirator (or at least a t shirt ninja mask) when sanding fiberglass.

reminds me of the artist Duane Hanson–he died of toxic resin and fixative fumes from sculpting. so yes…use protection..

here’s a pic of one of his lifesize fiberglass sculptures:

the person is fiber glass. I believe the clothes and props are just the real thing.

---

<div class="post-metadata">

**Author:** ![RedVirtue](https://forum.gbfans.com/user_avatar/forum.gbfans.com/redvirtue/32/6172_2.png) [@RedVirtue](https://forum.gbfans.com/u/RedVirtue)\
**Post date:** [December 5, 2009, 11:33pm UTC](https://forum.gbfans.com/t/just-a-question-about-fiberglass-shells/31048/16 "2009-12-05T23:33:54Z")

</div>

> [@Zander Yurami](#):
>
> > [@abritinthebay](#):
> >
> > You have two options
> > 
> > 1. buy a hole cutter for that exact size.
> > 
> > 2. Drill a hole in the middle and then use the dremels sanding wheel to sand the rest out. This is what I did and it took me about 10 mins to do all 4 nice and smooth. The sanding wheel on high speed goes through it like BUTTER.
> 
> He said powercell.
> 
> XD
> 
> I just used my cutting disc to cut out my window and then some sandpaper to clean up the edges

Woops. Is there a better term? I was quoting what it’s called in the “stefan’s” prop plan.

Thanks, abritinthebay.

---

<div class="post-metadata">

**Author:** ![Nerdy\_NotionZ](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/n/e8c25b/32.png) [@Nerdy\_NotionZ](https://forum.gbfans.com/u/Nerdy_NotionZ)\
**Post date:** [December 6, 2009, 12:11am UTC](https://forum.gbfans.com/t/just-a-question-about-fiberglass-shells/31048/17 "2009-12-06T00:11:34Z")

</div>

> [@RedVirtue](#):
>
> Woops. Is there a better term? I was quoting what it’s called in the “stefan’s” prop plan.
> 
> Thanks, abritinthebay.

You were right. abritinthebay thought you ment the 4 lights on the [Cyclotron](https://www.gbfans.com/wiki/equipment/proton-pack/cyclotron)

---

<div class="post-metadata">

**Author:** ![RedVirtue](https://forum.gbfans.com/user_avatar/forum.gbfans.com/redvirtue/32/6172_2.png) [@RedVirtue](https://forum.gbfans.com/u/RedVirtue)\
**Post date:** [December 7, 2009, 2:03am UTC](https://forum.gbfans.com/t/just-a-question-about-fiberglass-shells/31048/18 "2009-12-07T02:03:45Z")

</div>

Ah I see. I wonder if that voids the advice.. :whatever:

---

<div class="post-metadata">

**Author:** ![Libtechinit](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/l/dbc845/32.png) [@Libtechinit](https://forum.gbfans.com/u/Libtechinit)\
**Post date:** [December 7, 2009, 4:52am UTC](https://forum.gbfans.com/t/just-a-question-about-fiberglass-shells/31048/19 "2009-12-07T04:52:12Z")

</div>

> [@RedVirtue](#):
>
> Ah I see. I wonder if that voids the advice.. :whatever:

Well yea kinda.

The hole saw is used to cut round holes like the 4 on the [cyclotron](https://www.gbfans.com/wiki/equipment/proton-pack/cyclotron), abritinthebay’s advice is perfect for those 4 holes. But the powercell window is a rectangle, so the advice Zander Yurami gave you about using just a dremel cut off disk and then sanding or filing the edges smooth would be the best route for you to go.

---

<div class="post-metadata">

**Author:** ![enchanted\_unicorn](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/c2a13f/32.png) [@enchanted\_unicorn](https://forum.gbfans.com/u/enchanted_unicorn)\
**Post date:** [December 7, 2009, 5:00am UTC](https://forum.gbfans.com/t/just-a-question-about-fiberglass-shells/31048/20 "2009-12-07T05:00:08Z")

</div>

For the [power cell](https://www.gbfans.com/wiki/equipment/proton-pack/power-cell) window, I would drill out on both ends of the window with the largest possible drill bit, and use a skill saw/ jig saw to cut the straight lines. True, a dremmel with a disc would work, but when I use the dremmel with the cutting wheel, it sometimes jumps around on me. I feel you could have steadier control as you cut the window out if you went the jig saw route… just an opinion.

edit-- the lack of control with a dremmel may be due to my small girlie arms.

[Next page](https://forum.gbfans.com/t/just-a-question-about-fiberglass-shells/31048.md?page=2)
