# KEYFOB PLANS... **URL:** \ **Category:** Tutorials & Guides\ **Created:** [May 11, 2011, 11:12pm UTC](https://forum.gbfans.com/t/keyfob-plans/27688 "2011-05-11T23:12:27Z")\ **Posts on this page:** 14\ **Page:** 1
**Author:** ![ProtonCharger](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/p/e0b2c6/32.png) [@ProtonCharger](https://forum.gbfans.com/u/ProtonCharger)\ **Post date:** [May 11, 2011, 11:12pm UTC](https://forum.gbfans.com/t/keyfob-plans/27688/1 "2011-05-11T23:12:27Z")
I’m starting to update my Ghostbuster uniform and it’s come to a point to make keyfobs. For those of you who like making your own gear, I wanted to share my plans. I have approval from everyone I normally go to for accuracy approval. They are drawn at 1:1 scale and can/should be printed out from the pdf file located here if you plan to use them as a pattern. [http://www.megaupload.com/?d=QY24MBLS](http://www.megaupload.com/?d=QY24MBLS) Here’s a picture of the plan, _Unfortunately, I dont have any super clear details on the actual metal bits, so any one that chimes in with that information would be appreciated from everyone wanting to use these plans._ Granted, they’re probably not that hard to figure out, but any information would be nice. But remember, this is the preferred way to print if you want to use this as a pattern, it is 1:1 scale ready to be cut out and cut out from your choice of leather/pleather. [http://www.megaupload.com/?d=QY24MBLS](http://www.megaupload.com/?d=QY24MBLS) ---
**Author:** ![Kissimmee\_Buster](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/k/858c86/32.png) [@Kissimmee\_Buster](https://forum.gbfans.com/u/Kissimmee_Buster)\ **Post date:** [May 12, 2011, 1:50am UTC](https://forum.gbfans.com/t/keyfob-plans/27688/2 "2011-05-12T01:50:23Z")
How much $$$ would you guess this plan for keyfobs would save a person? BTW, thanks for posting this; it’ll help after I get my new belt. ---
**Author:** ![jackdoud](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/j/6a8cbe/32.png) [@jackdoud](https://forum.gbfans.com/u/jackdoud)\ **Post date:** [May 12, 2011, 2:06am UTC](https://forum.gbfans.com/t/keyfob-plans/27688/3 "2011-05-12T02:06:08Z")
Truthfully? Not a whole hell of a lot. You can get cheap off-cuts of leather on ebay but you’ll likely pay more for the metal parts if you’re only getting one or two(if it’s even possible) than someone who’s doing a run of 30-40. ---
**Author:** ![irricanian](https://forum.gbfans.com/user_avatar/forum.gbfans.com/irricanian/32/5887_2.png) [@irricanian](https://forum.gbfans.com/u/irricanian)\ **Post date:** [May 12, 2011, 2:14am UTC](https://forum.gbfans.com/t/keyfob-plans/27688/4 "2011-05-12T02:14:56Z")
> [@jackdoud](#): > > Truthfully? Not a whole hell of a lot. You can get cheap off-cuts of leather on ebay but you’ll likely pay more for the metal parts if you’re only getting one or two(if it’s even possible) than someone who’s doing a run of 30-40. Not to mention buying tools to install the snaps, leather dye and sealer, etc. Great idea if you already have that stuff. ---
**Author:** ![ProtonCharger](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/p/e0b2c6/32.png) [@ProtonCharger](https://forum.gbfans.com/u/ProtonCharger)\ **Post date:** [May 12, 2011, 2:52am UTC](https://forum.gbfans.com/t/keyfob-plans/27688/5 "2011-05-12T02:52:53Z")
> [@irricanian](#): > > Not to mention buying tools to install the snaps, leather dye and sealer, etc. Great idea if you already have that stuff. im sorry, i tend to assume people are self sufficient and have the tools, or are _prepared to invest in tools that they would use for other projects_ **not limited to belt fobs for a ghostbuster costume.** it can be done. my button tool was purchased at walmart, similar ones can be purchased at micheals or other craft stores. the same for riveting tools, waxed thread, and leather needles. all relatively inexpensive and easy to work with. also the same locations you can purchase your snap buttons and rings, and dye if you do not use black leather. my main concern were the hooks. ---
**Author:** ![Kissimmee\_Buster](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/k/858c86/32.png) [@Kissimmee\_Buster](https://forum.gbfans.com/u/Kissimmee_Buster)\ **Post date:** [May 12, 2011, 3:13am UTC](https://forum.gbfans.com/t/keyfob-plans/27688/6 "2011-05-12T03:13:08Z")
So, I guess I can shop on here and save a few bucks. ---
**Author:** ![Kissimmee\_Buster](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/k/858c86/32.png) [@Kissimmee\_Buster](https://forum.gbfans.com/u/Kissimmee_Buster)\ **Post date:** [May 12, 2011, 2:18pm UTC](https://forum.gbfans.com/t/keyfob-plans/27688/8 "2011-05-12T14:18:15Z")
I might attempt to make them, there’s a shed full of “stuff” here at my house; a ton of tools that my grandfather has collected over the years, maybe on my next day off (If I get one) I’ll check around; wouldn’t be surprised if I found everything I need to make a few Fobs. ---
**Author:** ![demon-vice-commander](https://forum.gbfans.com/user_avatar/forum.gbfans.com/demon-vice-commander/32/186000_2.png) [@demon-vice-commander](https://forum.gbfans.com/u/demon-vice-commander)\ **Post date:** [May 15, 2011, 3:20am UTC](https://forum.gbfans.com/t/keyfob-plans/27688/9 "2011-05-15T03:20:40Z")
> [@ProtonCharger](#): > > _Unfortunately, I dont have any super clear details on the actual metal bits, so any one that chimes in with that information would be appreciated from everyone wanting to use these plans._ Granted, they’re probably not that hard to figure out, but any information would be nice. The main key fob has the following hardware: 3/4" squared D-ring: [http://www.strapworks.com/Metal\_D\_Ring\_p/mdrsq.htm](http://www.strapworks.com/Metal_D_Ring_p/mdrsq.htm) 3/4" swivel lobster clip 1" split O-ring 1/2" snap The other fob only has a lobster clip and snap (however, a 1" key ring can be worn with this, as seen on Venkman in the early press photos and Egon during the NYC shooting). Another interesting note about this second fob is that it curves outward at the bottom (where the snap is) and is not dyed on the inside, as compared to the main fob, which is straight and fully dyed. > **[Pistol Belt](http://www.gbfans.com/wiki/equipment/uniform/pistol-belt)** > > The belts worn in both films are replica M-1936 Pistol Belts. They were light gray in Ghostbusters and khaki in Ghostbusters II. They hold equipment s Hope that helps! ---
**Author:** ![ProtonCharger](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/p/e0b2c6/32.png) [@ProtonCharger](https://forum.gbfans.com/u/ProtonCharger)\ **Post date:** [May 15, 2011, 5:11am UTC](https://forum.gbfans.com/t/keyfob-plans/27688/10 "2011-05-15T05:11:38Z")
Tonight was a neat night in the chat, we were talking about belt fobs and then Demon Vice Commander popped in with a ton of useful information. Infact he showed that these are what the exact type of clasp is used ![image](https://discdn.gbfans.com/original/1X/4dcb57651a75abfd07fb36c70c6c5108c49bdb34.jpeg) You can find them on ebay from time to time, you’re looking for a 2 1/2" in length with a 3/4" slot. Specifically called: 3/4" swivel lobster clips for you googlers, or, HEAVY DUTY SWIVEL SNAP BOLT HOOKS NICKEL FINISH (probably the one id go with. probably a hint.) Here’s what I found, before the accurate one was shared. The only issue with this is, the corners are round, when they’re supposed to be squared. I sent for a quote, just for curiosity and because that was when I WANTED THEM NOW, we’ll see about price when I hear back. if i hear back. [http://zoronmfg.thomasnet.com/viewitems/swivel-strap-eye-latch-snap-nickel-plated-4800/aps-swivel-strap-eye-latch-snap-4800-nickel-plated?&bc=1153|1217](http://zoronmfg.thomasnet.com/viewitems/swivel-strap-eye-latch-snap-nickel-plated-4800/aps-swivel-strap-eye-latch-snap-4800-nickel-plated?&bc=1153%7C1217) **The D-ring** [http://www.strapworks.com/Metal\_D\_Ring\_p/mdrsq.htm](http://www.strapworks.com/Metal_D_Ring_p/mdrsq.htm) I needed 4, because I’m making two of every fob, set me back $4.16. You _can_ get some at JOANNS for 2.29, like I did earlier today, but the only ones I saw were rounded edges and not like the squared edges no the real ones. **\*\*** **The Buttons\*\*** Purchased at Walmart for less than 4 dollars and it came with a tool to assemble them - this is called an investment thing. Keep that tool. I have 2 because I keep buying more buttons and its cheaper to just get that, than drive all over town to get just the buttons. **\*\*** **The Ring\*\*** I bought a baggie of 32mm key rings at JOANN fabric, they were 1.29 for 4. Honestly, I’m not having much luck finding a solid ring with a split in it. It wont be a difficult thing to change when you have it assembled though. There we go. ---
**Author:** ![demon-vice-commander](https://forum.gbfans.com/user_avatar/forum.gbfans.com/demon-vice-commander/32/186000_2.png) [@demon-vice-commander](https://forum.gbfans.com/u/demon-vice-commander)\ **Post date:** [May 15, 2011, 2:14pm UTC](https://forum.gbfans.com/t/keyfob-plans/27688/11 "2011-05-15T14:14:01Z")
A split key ring is exactly what they used on the screen-used fobs (since they were originally meant for holding keys and not big neutrona wands). I bandied about the idea of using solid O-rings, but they just didn’t look right. i’ll have to post some pictures of mine sometime. ---
**Author:** ![Jc3394](https://forum.gbfans.com/user_avatar/forum.gbfans.com/jc3394/32/6379_2.png) [@Jc3394](https://forum.gbfans.com/u/Jc3394)\ **Post date:** [January 30, 2012, 9:58pm UTC](https://forum.gbfans.com/t/keyfob-plans/27688/12 "2012-01-30T21:58:27Z")
oh no! i came across this one too late - the Megaupload links are all dead. Mr. ProtonCharger : would you happen to still have your plans? I’m curious to see how they looked thanks in advance ---
**Author:** ![ProtonCharger](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/p/e0b2c6/32.png) [@ProtonCharger](https://forum.gbfans.com/u/ProtonCharger)\ **Post date:** [January 31, 2012, 12:58am UTC](https://forum.gbfans.com/t/keyfob-plans/27688/13 "2012-01-31T00:58:43Z")
sure thing man, this is the 1:1 scale pdf: [http://www.4shared.com/office/wLjfVQqB/keyfobs.html](http://www.4shared.com/office/wLjfVQqB/keyfobs.html) ---
**Author:** ![Stryfe21\_2](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/s/22d042/32.png) [@Stryfe21\_2](https://forum.gbfans.com/u/Stryfe21_2)\ **Post date:** [August 19, 2017, 7:20pm UTC](https://forum.gbfans.com/t/keyfob-plans/27688/15 "2017-08-19T19:20:07Z")
Crud. The updated link is dead. ---
**Author:** ![kingpin](https://forum.gbfans.com/user_avatar/forum.gbfans.com/kingpin/32/187259_2.png) [@kingpin](https://forum.gbfans.com/u/kingpin)\ **Post date:** [August 21, 2017, 2:27pm UTC](https://forum.gbfans.com/t/keyfob-plans/27688/16 "2017-08-21T14:27:18Z")
> [@Stryfe21\_2](#): > > Crud. The updated link is dead. Well, it has been six years since the original post was made, and the member threw a tantrum about the various files he’d uploaded… and was eventually banned for being a troll. :whatever: