# Labcoat Ray w/ updated Ghost Sniffer **URL:** \ **Category:** Collectibles\ **Created:** [September 28, 2010, 11:01pm UTC](https://forum.gbfans.com/t/labcoat-ray-w-updated-ghost-sniffer/39770 "2010-09-28T23:01:20Z")\ **Posts on this page:** 12\ **Page:** 1
**Author:** ![Mereel](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/m/b38774/32.png) [@Mereel](https://forum.gbfans.com/u/Mereel)\ **Post date:** [September 28, 2010, 11:01pm UTC](https://forum.gbfans.com/t/labcoat-ray-w-updated-ghost-sniffer/39770/1 "2010-09-28T23:01:20Z")
Not too much to do on the figure itself (altho I wish they wouldn’t have sculpted in the pocket protector, ugh) but the ghost sniffer I went ahead and tweaked a bit. I wanted to play around with what worked so when I get ready to do Peter’s Ghost Sniffer I can have a better idea of what to do. the yellow tubing needs to be a thinner guage (all I could find at the moment) and the black tubing for the ‘stick’ I’d like to rework for Venkman. \*Thanks again for everyone that posted pics of the Ghost Sniffer’s labels, was a BIG help! I noticed the minimates version of Labcoat Ray had him with his khaki pants on, but I couldn’t find any other source that could confirm that was true, so I left his pants the dark brown [Mattel](https://www.gbfans.com/wiki/toys/mattel) painted them. All in all though, I like it a lot better! ![image](https://discdn.gbfans.com/original/3X/6/e/6e42ef1ed7a595881e44ca32acf09b8031e180cd.jpeg) ![image](https://discdn.gbfans.com/original/3X/e/6/e6e40fdb57575f2dde3aad7cddab7dfa3ebed7e8.jpeg) ---
**Author:** ![kingpin](https://forum.gbfans.com/user_avatar/forum.gbfans.com/kingpin/32/188026_2.png) [@kingpin](https://forum.gbfans.com/u/kingpin)\ **Post date:** [September 29, 2010, 7:00am UTC](https://forum.gbfans.com/t/labcoat-ray-w-updated-ghost-sniffer/39770/2 "2010-09-29T07:00:55Z")
Superb! The work shows. I’m assuming you used a microdrill to excavate material from the Sniffer and squeeze bulb to fit the new hoses. Is the base of the “wand” original, or also one you put together? The stickers, paint and additions really make the Sniffer “pop”. Is it a scaled down digital file? ---
**Author:** ![Chris\_M\_UK](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/c/ce7236/32.png) [@Chris\_M\_UK](https://forum.gbfans.com/u/Chris_M_UK)\ **Post date:** [September 29, 2010, 9:49am UTC](https://forum.gbfans.com/t/labcoat-ray-w-updated-ghost-sniffer/39770/3 "2010-09-29T09:49:23Z")
Really nice! Could you post some pictures of the ghost sniffer close up please? I wanna check out your super detail! ---
**Author:** ![joeghostbuster](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/j/e99b99/32.png) [@joeghostbuster](https://forum.gbfans.com/u/joeghostbuster)\ **Post date:** [September 29, 2010, 12:23pm UTC](https://forum.gbfans.com/t/labcoat-ray-w-updated-ghost-sniffer/39770/4 "2010-09-29T12:23:15Z")
that is awesome! are you and CaptCyan competing for my love or something? ---
**Author:** ![CaptCyan](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/c/e68b1a/32.png) [@CaptCyan](https://forum.gbfans.com/u/CaptCyan)\ **Post date:** [September 29, 2010, 1:46pm UTC](https://forum.gbfans.com/t/labcoat-ray-w-updated-ghost-sniffer/39770/5 "2010-09-29T13:46:11Z")
> [@Mereel](#): > > I wanted to play around with what worked so when I get ready to do Peter’s Ghost Sniffer I can have a better idea of what to do. the yellow tubing needs to be a thinner guage (all I could find at the moment) and the black tubing for the ‘stick’ I’d like to rework for Venkman. \*Thanks again for everyone that posted pics of the Ghost Sniffer’s labels, was a BIG help! Excellent job on the Sniffer. What kind and diameter of tubing are you using? Smallest I’ve found is 1/16 " diameter pvc used for tying fishing flys. Did you hand paint the labels again or print them out this time? ---
**Author:** ![Gareee](https://forum.gbfans.com/user_avatar/forum.gbfans.com/gareee/32/5994_2.png) [@Gareee](https://forum.gbfans.com/u/Gareee)\ **Post date:** [September 29, 2010, 2:19pm UTC](https://forum.gbfans.com/t/labcoat-ray-w-updated-ghost-sniffer/39770/6 "2010-09-29T14:19:24Z")
For the yellow tubing maybe just use a cut of yellow wire the right length? It would still be bendy, but would also hold whatever shape you chose for it. ---
**Author:** ![Mereel](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/m/b38774/32.png) [@Mereel](https://forum.gbfans.com/u/Mereel)\ **Post date:** [September 29, 2010, 5:31pm UTC](https://forum.gbfans.com/t/labcoat-ray-w-updated-ghost-sniffer/39770/7 "2010-09-29T17:31:51Z")
Thanks everyone for the feedback. Definitely helps to hear what people thinks as it will make the next Ghost Sniffer that much better! I’m not sure what a micro drill is exactly, but what I used what a couple small drill bits with a power drill (lol not the best method, will be looking into picking up captcyan’s spiral drill method next time haha) and thankfully didn’t butcher the little unit too bad, lol. The silver base of the wand is still original, I would have liked to make something smaller to be more accurate, but I didn’t think the hand would be able to hold it well enough~~ The tubing is actually tubing my wife found at Hobby Lobby that’s used for necklace and bead making. I was looking all over trying to find ‘small scale “flexible”’ tubing and my wife thankfully found this stuff. There was also a coiled black tube that I think will work perfectly for Venkman’s. I had to spray paint the black tube (it was clear) so that’s why it’s cracking a bit. The coiled tubing comes in black so I shouldn’t have that problem next time:) This time I printed out the labels, I figured since the label was going to be large enough, most of the detail would come through. I don’t know why but I gave up this time trying to do the smaller Bacharach label and just painted it in since the label was just NOT cooperating with me. I think it works, lol. The yellow wire isn’t a bad idea actually, I’ll be looking into more options this time around and I’m hoping it’ll be easier since Venkman uses the unit off his shoulder, as opposed to off his chest. Here’s a closer shot of the Sniffer as well as the decals. ![image](https://discdn.gbfans.com/original/3X/d/2/d20751cbf44ba5dd94bddb56db2575d32d20689a.jpeg) ---
**Author:** ![kingpin](https://forum.gbfans.com/user_avatar/forum.gbfans.com/kingpin/32/188026_2.png) [@kingpin](https://forum.gbfans.com/u/kingpin)\ **Post date:** [September 29, 2010, 5:42pm UTC](https://forum.gbfans.com/t/labcoat-ray-w-updated-ghost-sniffer/39770/8 "2010-09-29T17:42:30Z")
I’m heavily tempted to actually use your method and convert mine. Here’s a micro drill: Very useful for small scale projects like the [Mattel](https://www.gbfans.com/wiki/toys/mattel) Sniffer, my brother was actually supplied with one in the ERTL AMT Star Destroyer kit he bought years ago to drill the holes for the lights. ---
**Author:** ![demon-vice-commander](https://forum.gbfans.com/user_avatar/forum.gbfans.com/demon-vice-commander/32/186000_2.png) [@demon-vice-commander](https://forum.gbfans.com/u/demon-vice-commander)\ **Post date:** [September 29, 2010, 7:21pm UTC](https://forum.gbfans.com/t/labcoat-ray-w-updated-ghost-sniffer/39770/9 "2010-09-29T19:21:37Z")
Very nice sniffer! The added details and colors really make a difference. :crunch: ---
**Author:** ![Mereel](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/m/b38774/32.png) [@Mereel](https://forum.gbfans.com/u/Mereel)\ **Post date:** [September 29, 2010, 8:48pm UTC](https://forum.gbfans.com/t/labcoat-ray-w-updated-ghost-sniffer/39770/10 "2010-09-29T20:48:54Z")
Man, that micro drill looks really nice! The website I was able to find it on listed it at roughly $700 or so. . .I wonder if it’d be possible to outfit my dremel with some smaller drill bits. . . ---
**Author:** ![CaptCyan](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/c/e68b1a/32.png) [@CaptCyan](https://forum.gbfans.com/u/CaptCyan)\ **Post date:** [September 29, 2010, 9:32pm UTC](https://forum.gbfans.com/t/labcoat-ray-w-updated-ghost-sniffer/39770/11 "2010-09-29T21:32:36Z")
> [@Mereel](#): > > Man, that micro drill looks really nice! The website I was able to find it on listed it at roughly $700 or so. . .I wonder if it’d be possible to outfit my dremel with some smaller drill bits. . . Check this site out: [http://www.micromark.com/](http://www.micromark.com/) They have a nice assortment of chucks, pin vises and micro drill bits. ---
**Author:** ![Gareee](https://forum.gbfans.com/user_avatar/forum.gbfans.com/gareee/32/5994_2.png) [@Gareee](https://forum.gbfans.com/u/Gareee)\ **Post date:** [September 29, 2010, 11:41pm UTC](https://forum.gbfans.com/t/labcoat-ray-w-updated-ghost-sniffer/39770/12 "2010-09-29T23:41:15Z")
You can also use a dremel.. you can get drill bits down to 1/32 of an inch, and anything smaller then that I can’t see anyway.. LOL!