# lburton's Scratch Proton Pack build

**URL:** <https://forum.gbfans.com/t/lburtons-scratch-proton-pack-build/20358>\
**Category:** Proton Packs\
**Created:** [April 10, 2014, 4:25pm UTC](https://forum.gbfans.com/t/lburtons-scratch-proton-pack-build/20358 "2014-04-10T16:25:08Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![lburton](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/l/fbc32d/32.png) [@lburton](https://forum.gbfans.com/u/lburton)\
**Post date:** [April 10, 2014, 4:25pm UTC](https://forum.gbfans.com/t/lburtons-scratch-proton-pack-build/20358/1 "2014-04-10T16:25:08Z")

</div>

Here it goes, I have been collecting components to start a from scratch (no fiber shell) [Proton Pack](https://www.gbfans.com/wiki/equipment/proton-pack) and Thrower build. My goal at first was screen accurate but rising costs have convinced me to go as close as possible but cut corners to save on costs.

To start here is a small photo of a mockup with a few early collected parts, laid out on the prototype [motherboard](https://www.gbfans.com/wiki/equipment/proton-pack/motherboard) material for simple personal satisfaction. The shock mount is constructed from two sizes of washers (I chose poorly on the ID though and they kind of slide around). The foam, 9" cake pan, and PVC pipes will be making the jump to the actual construction, which will hopefully begin this weekend.

 ![image](https://discdn.gbfans.com/original/3X/4/2/4290ad38c86231caed7946dfe0111cef9e395405.jpeg)

I have also located an interesting item I intend on using in place of a custom made [Power Cell](https://www.gbfans.com/wiki/equipment/proton-pack/power-cell):

 ![image](https://discdn.gbfans.com/original/3X/a/1/a15394c1a18834824d14728975988658a6303cda.jpeg)

The dimensions are close enough that I dont mind using it, and the [injector](https://www.gbfans.com/wiki/equipment/proton-pack/injectors) PVC fits like a glove underneath.

I will keep adding to this thread as the pack progresses.

---

<div class="post-metadata">

**Author:** ![PssdffJay](https://forum.gbfans.com/user_avatar/forum.gbfans.com/pssdffjay/32/6529_2.png) [@PssdffJay](https://forum.gbfans.com/u/PssdffJay)\
**Post date:** [April 11, 2014, 12:05am UTC](https://forum.gbfans.com/t/lburtons-scratch-proton-pack-build/20358/2 "2014-04-11T00:05:25Z")

</div>

For the hock mount, what if you put a dab of glue or epoxy between each washer to stop the sliding.

Im looking forward to the progress on this.

---

<div class="post-metadata">

**Author:** ![syckotheklown](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/s/d6d6ee/32.png) [@syckotheklown](https://forum.gbfans.com/u/syckotheklown)\
**Post date:** [April 11, 2014, 12:27am UTC](https://forum.gbfans.com/t/lburtons-scratch-proton-pack-build/20358/3 "2014-04-11T00:27:18Z")

</div>

Lookin good so far. Looks like you have a plan. Looking forward to your progress.

---

<div class="post-metadata">

**Author:** ![lburton](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/l/fbc32d/32.png) [@lburton](https://forum.gbfans.com/u/lburton)\
**Post date:** [April 11, 2014, 1:26pm UTC](https://forum.gbfans.com/t/lburtons-scratch-proton-pack-build/20358/4 "2014-04-11T13:26:20Z")

</div>

PssdffJay thanks for the suggestion, that should help greatly 🙂

---

<div class="post-metadata">

**Author:** ![Hammer](https://forum.gbfans.com/user_avatar/forum.gbfans.com/hammer/32/6544_2.png) [@Hammer](https://forum.gbfans.com/u/Hammer)\
**Post date:** [April 11, 2014, 2:39pm UTC](https://forum.gbfans.com/t/lburtons-scratch-proton-pack-build/20358/5 "2014-04-11T14:39:59Z")

</div>

Very cool. I’d suggest searching scratch build on here and read, read, read . You’d be amazed at how much stuff you’ve probably already got just lying around. I’ve only.been active here for a few months but I laugh at myself because I’m always looking at parts, ie… lids, caps, pipes, etc. I know very little about plumbing but can now spend an hour in the plumbing section at Lowe’s… lol

---

<div class="post-metadata">

**Author:** ![syckotheklown](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/s/d6d6ee/32.png) [@syckotheklown](https://forum.gbfans.com/u/syckotheklown)\
**Post date:** [April 11, 2014, 2:50pm UTC](https://forum.gbfans.com/t/lburtons-scratch-proton-pack-build/20358/6 "2014-04-11T14:50:01Z")

</div>

I hear that Hammer. Since starting my pack, my wife laughs at me when im wondering the house and says… “lookin for pack parts again huh”? Lol. I look like a pack rat with my shoe box of doo dads and random bits lol. Not to mention I feel like Mario iv been in the plumbing section at home depot so much. Lol

---

<div class="post-metadata">

**Author:** ![lburton](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/l/fbc32d/32.png) [@lburton](https://forum.gbfans.com/u/lburton)\
**Post date:** [April 11, 2014, 3:24pm UTC](https://forum.gbfans.com/t/lburtons-scratch-proton-pack-build/20358/7 "2014-04-11T15:24:20Z")

</div>

Same here. hardware, craft and thrift stores are an adventure now.

---

<div class="post-metadata">

**Author:** ![redfive1973](https://forum.gbfans.com/user_avatar/forum.gbfans.com/redfive1973/32/6521_2.png) [@redfive1973](https://forum.gbfans.com/u/redfive1973)\
**Post date:** [April 11, 2014, 5:38pm UTC](https://forum.gbfans.com/t/lburtons-scratch-proton-pack-build/20358/8 "2014-04-11T17:38:41Z")

</div>

It becomes an addiction. You second guess throwing away drink lids, containers of all sorts, just about almost anything can be used for a part of a prop. Cause even if you don’t have a need for it right away, somewhere down the line you will.

---

<div class="post-metadata">

**Author:** ![lburton](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/l/fbc32d/32.png) [@lburton](https://forum.gbfans.com/u/lburton)\
**Post date:** [April 14, 2014, 9:43pm UTC](https://forum.gbfans.com/t/lburtons-scratch-proton-pack-build/20358/9 "2014-04-14T21:43:46Z")

</div>

Thanks to the kindness of some new friends I have my [injectors](https://www.gbfans.com/wiki/equipment/proton-pack/injectors) cut and a crispy new booster rod! Also shown is a RGB/Movie hybrid thrower I am building to get my feet wet. Oh and a relative rf strength meter will be a rigged up PKE 🙂

---

<div class="post-metadata">

**Author:** ![spacecoastgbs](https://forum.gbfans.com/user_avatar/forum.gbfans.com/spacecoastgbs/32/186961_2.png) [@spacecoastgbs](https://forum.gbfans.com/u/spacecoastgbs)\
**Post date:** [April 16, 2014, 5:14pm UTC](https://forum.gbfans.com/t/lburtons-scratch-proton-pack-build/20358/10 "2014-04-16T17:14:33Z")

</div>

This looks like a fun build.

---

<div class="post-metadata">

**Author:** ![syckotheklown](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/s/d6d6ee/32.png) [@syckotheklown](https://forum.gbfans.com/u/syckotheklown)\
**Post date:** [April 16, 2014, 7:00pm UTC](https://forum.gbfans.com/t/lburtons-scratch-proton-pack-build/20358/11 "2014-04-16T19:00:09Z")

</div>

I like that [pke meter](https://www.gbfans.com/shop/mattel-pke-meter). Reminds me of [the real ghostbusters](https://www.gbfans.com/wiki/games/the-real-ghostbusters-activison)

---

<div class="post-metadata">

**Author:** ![portugueseGB](https://forum.gbfans.com/user_avatar/forum.gbfans.com/portuguesegb/32/3999_2.png) [@portugueseGB](https://forum.gbfans.com/u/portugueseGB)\
**Post date:** [April 16, 2014, 7:38pm UTC](https://forum.gbfans.com/t/lburtons-scratch-proton-pack-build/20358/12 "2014-04-16T19:38:37Z")

</div>

Suggestion: why not do it with foam core? You can choose the thickest one - it is strong and very very easy to work with. At least you’d get the dimensions right. Check out my build as an example (but there are FAR better foam core builds than mind in the forum, do search for them as well).

> **[Yet another proton pack project](https://forum.gbfans.com/viewtopic.php?f=2&t=20921)**
>
> Hi all, I’m posting here the progress of my proton pack project. I’m building it from scratch following Paranorman’s plans and Stefan’s measurements, both available here (both deserve a huge “thank you”!). I’m not the builder type but it is taking...

Like the PKE as well, looks like a perfect start for a RGB type model.

---

<div class="post-metadata">

**Author:** ![lburton](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/l/fbc32d/32.png) [@lburton](https://forum.gbfans.com/u/lburton)\
**Post date:** [April 19, 2014, 3:22am UTC](https://forum.gbfans.com/t/lburtons-scratch-proton-pack-build/20358/13 "2014-04-19T03:22:48Z")

</div>

Finally got some time to work on these things. Gorilla gluing the heatsink onto the Hybrid thrower.

---

<div class="post-metadata">

**Author:** ![syckotheklown](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/s/d6d6ee/32.png) [@syckotheklown](https://forum.gbfans.com/u/syckotheklown)\
**Post date:** [April 19, 2014, 4:03am UTC](https://forum.gbfans.com/t/lburtons-scratch-proton-pack-build/20358/14 "2014-04-19T04:03:26Z")

</div>

Not bad at all sir. Its coming along very well. Been watching TRG the last two days with my kids. So your looking pretty well off. Are you keeping the loom hose gray?

---

<div class="post-metadata">

**Author:** ![lburton](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/l/fbc32d/32.png) [@lburton](https://forum.gbfans.com/u/lburton)\
**Post date:** [April 19, 2014, 4:13am UTC](https://forum.gbfans.com/t/lburtons-scratch-proton-pack-build/20358/15 "2014-04-19T04:13:46Z")

</div>

Not sure yet. This is extra hoses from my CPAP so it would be great to be able to use them if I can figure a way to spray them black without it flaking off as the hose moves

---

<div class="post-metadata">

**Author:** ![syckotheklown](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/s/d6d6ee/32.png) [@syckotheklown](https://forum.gbfans.com/u/syckotheklown)\
**Post date:** [April 19, 2014, 4:43am UTC](https://forum.gbfans.com/t/lburtons-scratch-proton-pack-build/20358/16 "2014-04-19T04:43:58Z")

</div>

Thats what I was worried about too. Iv been searching home depot and lowes to no avail,. So I think ill be putting an order into the gbfans shop for the 3/4 loom. Id sudgest doing that. Because I cant see a fees able way to spray without flaking.

---

<div class="post-metadata">

**Author:** ![lburton](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/l/fbc32d/32.png) [@lburton](https://forum.gbfans.com/u/lburton)\
**Post date:** [April 19, 2014, 4:51am UTC](https://forum.gbfans.com/t/lburtons-scratch-proton-pack-build/20358/17 "2014-04-19T04:51:03Z")

</div>

For the hybrid thrower I might not worry about it. Definitely picking up some of the gbfans 3/4 for when I do the real thrower.

---

<div class="post-metadata">

**Author:** ![syckotheklown](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/s/d6d6ee/32.png) [@syckotheklown](https://forum.gbfans.com/u/syckotheklown)\
**Post date:** [April 19, 2014, 4:54am UTC](https://forum.gbfans.com/t/lburtons-scratch-proton-pack-build/20358/18 "2014-04-19T04:54:46Z")

</div>

Since your doing a hybrid, why not do a mix of both. Use some black 3/4 rubber hose from the garden section. Youll get the smoothness of TRG pack, and the black 3/4 size and color from the movie pack. Just a suggestion.

---

<div class="post-metadata">

**Author:** ![lburton](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/l/fbc32d/32.png) [@lburton](https://forum.gbfans.com/u/lburton)\
**Post date:** [April 19, 2014, 4:56am UTC](https://forum.gbfans.com/t/lburtons-scratch-proton-pack-build/20358/19 "2014-04-19T04:56:50Z")

</div>

Funny enough I just returned that exact same 3/4 hose tonight to Lowes because it wasn’t flexible enough despite the guy insisting it would soften up once brought inside for a while. It didn’t 😛

---

<div class="post-metadata">

**Author:** ![lburton](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/l/fbc32d/32.png) [@lburton](https://forum.gbfans.com/u/lburton)\
**Post date:** [April 19, 2014, 8:55pm UTC](https://forum.gbfans.com/t/lburtons-scratch-proton-pack-build/20358/20 "2014-04-19T20:55:48Z")

</div>

So I finally set up shop in the garage with my shiny new dremel and got to work on the thrower. Test mounted the switch and primary indicator light. Vents and smaller LED mounts are next but I may be best using a drill rather than the dremel and my unsteady hand.

Slowly but surely its starting to look like a thrower.

[Next page](https://forum.gbfans.com/t/lburtons-scratch-proton-pack-build/20358.md?page=2)
