# LC-2 Alice frame mods for the Haslab Spengler pack? **URL:** \ **Category:** Proton Packs\ **Created:** [January 4, 2023, 5:27pm UTC](https://forum.gbfans.com/t/lc-2-alice-frame-mods-for-the-haslab-spengler-pack/37267 "2023-01-04T17:27:55Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![doctorevil30564](https://forum.gbfans.com/user_avatar/forum.gbfans.com/doctorevil30564/32/4052_2.png) [@doctorevil30564](https://forum.gbfans.com/u/doctorevil30564)\ **Post date:** [January 4, 2023, 5:27pm UTC](https://forum.gbfans.com/t/lc-2-alice-frame-mods-for-the-haslab-spengler-pack/37267/1 "2023-01-04T17:27:55Z")
Has anyone started working on a non-destructive mod to use a LC-2 Alice frame with the Haslab pack without having to do any damage to the frame or the pack? Since they are using metal brackets to attach the frame, I would think it would be possible to make a replacement bracket that can accommodate the horizontal bar on the LC-2 frame. ---
**Author:** ![gamera1968](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/g/d78d45/32.png) [@gamera1968](https://forum.gbfans.com/u/gamera1968)\ **Post date:** [January 4, 2023, 8:56pm UTC](https://forum.gbfans.com/t/lc-2-alice-frame-mods-for-the-haslab-spengler-pack/37267/2 "2023-01-04T20:56:26Z")
IMHO, it wouldn’t be worth the hassle modding / hacking up an LC-2 frame, so it’s best to try and find an LC-1. Amazon and Fox Outdoors are your best bet, b/c most other online shops are either out of stock, or overpriced. I bought my LC-1 Rothco frame last year for $55 on amazon - which is the same frame on the [Afterlife](https://www.gbfans.com/shop/ghostbusters-afterlife) packs. 🙂 ---
**Author:** ![TobinsGuide](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/ecb155/32.png) [@TobinsGuide](https://forum.gbfans.com/u/TobinsGuide)\ **Post date:** [January 7, 2023, 2:47am UTC](https://forum.gbfans.com/t/lc-2-alice-frame-mods-for-the-haslab-spengler-pack/37267/3 "2023-01-07T02:47:56Z")
> [@gamera1968 post\_id=4976201 time=1672865786 user\_id=9157](#): > > IMHO, it wouldn’t be worth the hassle modding / hacking up an LC-2 frame, so it’s best to try and find an LC-1. > > Amazon and Fox Outdoors are your best bet, b/c most other online shops are either out of stock, or overpriced. > > I bought my LC-1 Rothco frame last year for $55 on amazon - which is the same frame on the Afterlife packs. 🙂 I don’t think you’d need to hack up an LC-2 frame. You’d just need special brackets. ---
**Author:** ![kman](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/k/f07891/32.png) [@kman](https://forum.gbfans.com/u/kman)\ **Post date:** [January 14, 2023, 11:30pm UTC](https://forum.gbfans.com/t/lc-2-alice-frame-mods-for-the-haslab-spengler-pack/37267/4 "2023-01-14T23:30:54Z")
My HasLabs pack came today and I was able to mount it to my vintage LC-2 frame without any modifications. Note it’s not a _perfect_ fit (the brackets are a hair smaller than they should be to fit over the frame, so it’s TIGHT and needs some force to shove them onto the bracket, but it mostly works) … and a couple of the brackets don’t actually fit at all. But I feel reasonably confident that the brackets that do fit are adequate. I got the two bottom standoffs no problem, and the top center bar (on the vertical bar). My frame’s horizontal bar appears to be slightly skewed, though, so I only got one of the horizontal brackets on (the holes don’t align well enough on [the other side](https://www.gbfans.com/wiki/publications/comics/ghostbusters-the-other-side)). Then I added the middle vertical bar mount. I didn’t try to do the bottom vertical one. 5 of 7 attachment points seems pretty reasonable, though, not that it was super easy. ![image](https://discdn.gbfans.com/original/3X/7/6/76b94f3e76f8cc40a09d2acdd175dacdb1e91129.jpeg) Misaligned on one side (probably a slightly skewed frame crossbar): ![image](https://discdn.gbfans.com/original/3X/f/6/f60bf80ae7404ea8e3d63c698fbb1e733dfcf476.jpeg) ![image](https://discdn.gbfans.com/original/3X/c/3/c3c3f970cb93aa466ee71c9f7a23a7e4d112636d.jpeg) But it feels nice and sturdy… I’m pleased, enough. 🙂 ![image](https://discdn.gbfans.com/original/3X/6/6/66ea64a87b24b8d5407051023e23a4835b8f9efa.jpeg)