# Left Goggle Lens Identified!

**URL:** <https://forum.gbfans.com/t/left-goggle-lens-identified/25627>\
**Category:** Ecto Goggles\
**Created:** [March 2, 2016, 11:31pm UTC](https://forum.gbfans.com/t/left-goggle-lens-identified/25627 "2016-03-02T23:31:38Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![glenn-frederick](https://forum.gbfans.com/user_avatar/forum.gbfans.com/glenn-frederick/32/188091_2.png) [@glenn-frederick](https://forum.gbfans.com/u/glenn-frederick)\
**Post date:** [March 2, 2016, 11:31pm UTC](https://forum.gbfans.com/t/left-goggle-lens-identified/25627/1 "2016-03-02T23:31:38Z")

</div>

I have been searching to identify the left lens and after a couple of years I am sure I have found it!

I am sorry the pictures are poor quality. I tried to take pictures measuring the adapter but they were to blurry!

I will try to used a friends camera to get better details. The current pictures are on my Facebook page!

> **[Facebook](https://www.facebook.com/photo.php?fbid=925573680891524&set=ms.c.eJyzNDI1NTc2szCwsDQ0NTLRswTyLQxMjMyBwqaGZgBmXwZg.bps.a.925571300891762.1073741825.100003167015672&type=3&theater&viewas=100000686899395)**

It was being sold as a Dissecting Scope and came in a blue box as do many Mirax Laborec products . I am sure that this is a Mirax Laborec Adapter! The instruction manual included was for the right Lens/Adapter.

The thumb screws it came with are exactly what was used for Rays [Ecto Goggles](https://www.gbfans.com/shop/mattel-ecto-goggles) in the movie. There must have been another laborec Camera part the Prop Department took the screws off for the right Lens!

---

<div class="post-metadata">

**Author:** ![noslliT](https://forum.gbfans.com/user_avatar/forum.gbfans.com/nosllit/32/5954_2.png) [@noslliT](https://forum.gbfans.com/u/noslliT)\
**Post date:** [March 3, 2016, 12:16am UTC](https://forum.gbfans.com/t/left-goggle-lens-identified/25627/2 "2016-03-03T00:16:17Z")

</div>

No way! Great find

---

<div class="post-metadata">

**Author:** ![fifth\_beatle](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/f/e9a140/32.png) [@fifth\_beatle](https://forum.gbfans.com/u/fifth_beatle)\
**Post date:** [March 3, 2016, 12:45am UTC](https://forum.gbfans.com/t/left-goggle-lens-identified/25627/3 "2016-03-03T00:45:27Z")

</div>

Noice! If you are correct, then it is another Mirax Laborec lens. You should update the Wiki page. :love:

---

<div class="post-metadata">

**Author:** ![kingpin](https://forum.gbfans.com/user_avatar/forum.gbfans.com/kingpin/32/188026_2.png) [@kingpin](https://forum.gbfans.com/u/kingpin)\
**Post date:** [March 3, 2016, 1:04am UTC](https://forum.gbfans.com/t/left-goggle-lens-identified/25627/4 "2016-03-03T01:04:47Z")

</div>

Gah! I was desperately trying to dig up where the other lense had been identified, to make sure the previous announcement wasn’t for a lense of the same design. Thanks for steering me to the right spot, Fifth.

And on that note, here’s the page for the other lense part: [Link](http://www.gbfans.com/wiki/Mirax_Laborec_Microscope_Lens)

---

<div class="post-metadata">

**Author:** ![demon-vice-commander](https://forum.gbfans.com/user_avatar/forum.gbfans.com/demon-vice-commander/32/186000_2.png) [@demon-vice-commander](https://forum.gbfans.com/u/demon-vice-commander)\
**Post date:** [March 5, 2016, 1:27pm UTC](https://forum.gbfans.com/t/left-goggle-lens-identified/25627/5 "2016-03-05T13:27:20Z")

</div>

This is wonderful news! Any measurements would be greatly appreciated. 🆒

---

<div class="post-metadata">

**Author:** ![Lowberg](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/l/46a35a/32.png) [@Lowberg](https://forum.gbfans.com/u/Lowberg)\
**Post date:** [July 23, 2016, 9:09pm UTC](https://forum.gbfans.com/t/left-goggle-lens-identified/25627/6 "2016-07-23T21:09:55Z")

</div>

Glenn, thank you so much for posting pics with the ruler over on your facebook page.

I’ve started to 3D model a simple version based on your measurement pics!

Its still a work in progress, I have to work on the knurling in places (the chrome ring should’t be showing through the knurling).. but I’d say its like 90% accurate. There’s some small built in rings that the ‘nubs’ are a part of but I didn’t include those yet. Suppose I could integrate that into the model.

 ![image](https://discdn.gbfans.com/original/3X/8/d/8d84e95787d1ba6139295231b6f1d790769fabbb.png)

I would LOVE to 3d Model the Laborec Microscope adapter / Right Lens that you have, if you could post similar photos with the ruler of that I would be so grateful!

---

<div class="post-metadata">

**Author:** ![turbomini73](https://forum.gbfans.com/user_avatar/forum.gbfans.com/turbomini73/32/183438_2.png) [@turbomini73](https://forum.gbfans.com/u/turbomini73)\
**Post date:** [May 24, 2017, 5:11pm UTC](https://forum.gbfans.com/t/left-goggle-lens-identified/25627/7 "2017-05-24T17:11:51Z")

</div>

Looks great to me! Great find Is it ok if I add you on fb so I can check out the pictures? Also did you have any picture of the box it came in or a model number??

---

<div class="post-metadata">

**Author:** ![Xavierallen](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/x/2bfe46/32.png) [@Xavierallen](https://forum.gbfans.com/u/Xavierallen)\
**Post date:** [July 24, 2017, 4:48am UTC](https://forum.gbfans.com/t/left-goggle-lens-identified/25627/8 "2017-07-24T04:48:17Z")

</div>

> [@Lowberg](#):
>
> Glenn, thank you so much for posting pics with the ruler over on your facebook page.
> 
> I’ve started to 3D model a simple version based on your measurement pics!
> 
> Its still a work in progress, I have to work on the knurling in places (the chrome ring should’t be showing through the knurling).. but I’d say its like 90% accurate. There’s some small built in rings that the ‘nubs’ are a part of but I didn’t include those yet. Suppose I could integrate that into the model.
> 
> ![image](https://discdn.gbfans.com/original/3X/8/d/8d84e95787d1ba6139295231b6f1d790769fabbb.png)
> 
> I would LOVE to 3d Model the Laborec Microscope adapter / Right Lens that you have, if you could post similar photos with the ruler of that I would be so grateful!

Since you have the 3d model of that lens, any chance you’d post the file so we can 3d print it? it looks awesome, great job!!!

---

<div class="post-metadata">

**Author:** ![Lowberg](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/l/46a35a/32.png) [@Lowberg](https://forum.gbfans.com/u/Lowberg)\
**Post date:** [July 27, 2017, 1:46pm UTC](https://forum.gbfans.com/t/left-goggle-lens-identified/25627/9 "2017-07-27T13:46:43Z")

</div>

Yea, I can look on my computer for it. We would need help from some of the 3D modeling experts here, as I don’t think the file / model is printable as is. There would be some maintenance needed.
