# Length of Acrylic Tube

**URL:** <https://forum.gbfans.com/t/length-of-acrylic-tube/4820>\
**Category:** Proton Packs\
**Created:** [July 29, 2019, 9:02pm UTC](https://forum.gbfans.com/t/length-of-acrylic-tube/4820 "2019-07-29T21:02:33Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![chyren](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/c/e19adc/32.png) [@chyren](https://forum.gbfans.com/u/chyren)\
**Post date:** [July 29, 2019, 9:02pm UTC](https://forum.gbfans.com/t/length-of-acrylic-tube/4820/1 "2019-07-29T21:02:33Z")

</div>

How long is the actual Acrylic Tube for the thrower? I’ve tried searching.

---

<div class="post-metadata">

**Author:** ![grogking](https://forum.gbfans.com/user_avatar/forum.gbfans.com/grogking/32/4048_2.png) [@grogking](https://forum.gbfans.com/u/grogking)\
**Post date:** [July 30, 2019, 2:53pm UTC](https://forum.gbfans.com/t/length-of-acrylic-tube/4820/2 "2019-07-30T14:53:33Z")

</div>

Here is what I found in some instructions on a 3d printed wand -

> [@](#):
>
> You have three options for a barrel - A cut test tube (140 x 25mm Plastic, cut to 75mm) with a Mattel-Style barrel tip, 3/4" Acrylic Rod (cut to 120mm), or the screen-accurate 7/8" Acrylic Barrel.

From this link

> **[Ghostbusters Neutrona Wand by WindDrake](https://www.thingiverse.com/thing:3164780)**
>
> Working off my previous experience with others Particle Thrower models (CountDeM0net, DancinFool82), I decided to model up a brand new wand in Solidworks, as many of the models out there, I had pretty serious issues with, be it small details or...

---

<div class="post-metadata">

**Author:** ![GBforever84](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/g/c68b51/32.png) [@GBforever84](https://forum.gbfans.com/u/GBforever84)\
**Post date:** [July 30, 2019, 8:31pm UTC](https://forum.gbfans.com/t/length-of-acrylic-tube/4820/3 "2019-07-30T20:31:45Z")

</div>

I personally took the test tube route with my wand, cut at 75 mm. It turned out great!