# Luke's screen accurate gigameter build,new pics pg 2 27/1/15

**URL:** <https://forum.gbfans.com/t/lukes-screen-accurate-gigameter-build-new-pics-pg-2-27-1-15/32640>\
**Category:** Giga Meters\
**Created:** [June 29, 2014, 9:30pm UTC](https://forum.gbfans.com/t/lukes-screen-accurate-gigameter-build-new-pics-pg-2-27-1-15/32640 "2014-06-29T21:30:36Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![Bob\_Wobbaz](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/b/d6d6ee/32.png) [@Bob\_Wobbaz](https://forum.gbfans.com/u/Bob_Wobbaz)\
**Post date:** [June 29, 2014, 9:30pm UTC](https://forum.gbfans.com/t/lukes-screen-accurate-gigameter-build-new-pics-pg-2-27-1-15/32640/1 "2014-06-29T21:30:36Z")

</div>

Hey everyone, thought I would show my progress so far with my gigameter build. I’ve been very excited to start this as the gigameter has remained for a long time one of my holy grail props. It looks superb in the film yet finding a scrub n’ buffer to work from is nigh on impossible. I was lucky to acquire a cast of a shell from Kingpin, I believe it’s an AZ spidey cast from a few years back. Cyland props has been a constant source of research on this build as there is so little information available on the build techniques and above all the electronics. There’s been a lot of guess work so far and I imagine there will continue to be. I’ve drawn some rough sketches to get my ideas down on how exactly to get everything working as close to as seen on screen as I can manage.

Anyway, enough waffle, on with the build!

 ![image](https://discdn.gbfans.com/original/3X/7/b/7b5badfdfc0c9e7fdb152a02810ee3268b9c50f6.jpeg)

Here’s the shell as it arrived, aint it pretty? The first thing I did was to get rid of all the mould struts on the inside. Next, I dremeled off the motor hump and using a piece of styrene, cut a piece to fit in the top part to match [the other side](https://www.gbfans.com/wiki/publications/comics/ghostbusters-the-other-side). I used milliputt to fit the piece and then sanded it smooth to match the left piece

 ![image](https://discdn.gbfans.com/original/3X/f/6/f6f4af658400ef88682bb447e0afb1558d6be871.jpeg)

 ![image](https://discdn.gbfans.com/original/3X/4/f/4fd0002263fde428b0392a267cce0930c63b327d.jpeg)

 ![image](https://discdn.gbfans.com/original/3X/a/7/a7be056061b4079ef8407a68e94378aaf3e9a07b.jpeg)

I then glued the two halves together using some strong plastic glue. I filled the inside of the handle with more milliputt which came in handy when I started to round the front of it. I also filled the rear ■■■■■■ of the body in preparation to sand that smooth too so it was more in line with the body.

 ![image](https://discdn.gbfans.com/original/3X/9/a/9aeff360dcfc275810541a3a4be8c951074a4e11.jpeg)

 ![image](https://discdn.gbfans.com/original/3X/3/f/3f3e52cc7e7f00cf62a116e29f82b0e0a8ff67e4.jpeg)

Next came the bit that I was dreading the most, cutting the body along the horizontal so that rather than there being a left and right, theres a top and bottom portion. I realised that if I messed this up it would be game over so I took my time marking things out. I used a craft knife to gently mark a line around the body. Next I used my dremel to mark a channel around, just to make sure that the line was straight.

 ![image](https://discdn.gbfans.com/original/3X/0/d/0d9efaa9fb4a9d28de8eca6d1b6aeeac28df3c57.jpeg)

Following the channel, I then went ahead and slowly cut the body lengthwise. Defo squeaky ■■■ moment, but voila!

 ![image](https://discdn.gbfans.com/original/3X/1/f/1fef95d8e74ec9097002bc8b1ddbfcbe1b148f11.jpeg)

 ![image](https://discdn.gbfans.com/original/3X/7/3/73058f3fd5d0af4721ec13ae1df36cb10a77e572.jpeg)

Now that the body was split, I began work on shaping the top portion. Using milliputt, I built up the front portion of the handle to create an angled box, then plated it with 0.80 styrene sheet. I filled the line along the top of the handle, sanded it smooth and also added the rectangles along the top

 ![image](https://discdn.gbfans.com/original/3X/7/1/711b41796f3e985d2b56f9d4058b96c66b05eb94.jpeg)

I then went back and sanded the front handle box and used my craft knives just to tidy up the lines slightly, make it a bit more crisp.

Next up was the side rectangles, I got them cut and using fine sand paper rounded the corners off, a really boring way to kill an hour!

 ![image](https://discdn.gbfans.com/original/3X/2/b/2b3b9578e55ebf9370b00fbefb6b59dbcf1fd4a1.jpeg)

And here they are attached! I must say, just adding these small details really makes it begin to look like a gigameter 🙂

 ![image](https://discdn.gbfans.com/original/3X/a/6/a67b0ccedc0c0ce53dce5b3117c6e3bf1ba31c2c.jpeg)

I decided that I would focus on the top portion of the giga first so next up was the microphone box, using the lower portion of the shell, I traced the general shape to create the base and lid of the new box. It’s not complete yet, but here’s where I’m at. A lot of it is eyeballing and guessing measurements, for the moment it’s just blu-takked together to see how it looks. Gutting the realistic microphones wasn’t nearly as difficult as I thought it would be.

 ![image](https://discdn.gbfans.com/original/3X/6/7/6741d720471f3eb3199b100ff7dc34efb2cd7a60.jpeg)

So here’s where it’s at so far! I’m very happy so far with how it’s progressing and surprised how fast it is too! Elements of this I thought would take time and patience and whilst that’s been true, it’s really come together over the space of 2 weeks.

 ![image](https://discdn.gbfans.com/original/3X/8/8/88174388e45b9f0fa4a6702a78ea800badea108e.jpeg)

 ![image](https://discdn.gbfans.com/original/3X/7/5/75de6f3e9a959dd7ea5bc85699eed28b1a9c84ce.jpeg)

For the moment, the dome is just a place holder. It’s one half of one of those plastic ■■■■■ from those machines where you put £1 in, turn the handle and there’s a small toy inside. The size of it is perfect but the clear dome has a money box hole cut into it. ■■ hum, at least it lets me know what size I need, I’ve already found a pretty good supplier of the domes and very cheaply too. I’ll be ordering a better dome soon.

As mentioned before, I’ve been sketching ideas out for the electronics, for the dome I’ve hit upon the idea of having the circuit board inside the dome with the telephone detangler just acting as a power conduit to it. I’ve found a small chaser circuit about the size of a [cyclotron](https://www.gbfans.com/wiki/equipment/proton-pack/cyclotron) lense that will fit in there nicely. I figured too that a rubber wheel off a toy mounted onto a small motor would be able to drive the dome round. This seems the best way I’ve figured of doing it so far, The chaser kit I’ve found only has 8 LEDs so only half the dome lights will light though I figure it will spin so fast it won’t be noticed

 ![image](https://discdn.gbfans.com/original/3X/6/9/699cf1a034692a86c589df3dad04dd4d57986831.jpeg)

 ![image](https://discdn.gbfans.com/original/3X/b/3/b3585c63d03230058a9f0bbbf25af69d69958709.jpeg)

The microphone movement is still confusing me but I figure that this is probably the best method I’ve thought of. A fixed arm will be attached to each microphone that will attach to a hinged drive rod that attaches to a set of gears. I figured that the motor will most likely have to be positioned downward into the main body of the gigameter and not inside the microphone attachment. I get the impression that the original prop was modified after it’s Star Trek appearance, getting rid of the numerical readout and replacing it with a motor to drive the microphones. There’s so little room there to play with that if they managed to cram a motor into there, the guy who made the prop is a certified genius! The microphone box is about the size of a coffee cup and has a height of around 2cm at a guess.

 ![image](https://discdn.gbfans.com/original/3X/0/2/022e886f9bd24f24494474e9b64714a71224e598.jpeg)

 ![image](https://discdn.gbfans.com/original/3X/9/5/9583abbe5eb1f36f6a082d811013f8a4c818d01d.jpeg)

Well, that’s all I got so far 🙂 I’ll post more updates as they happen

---

<div class="post-metadata">

**Author:** ![kingpin](https://forum.gbfans.com/user_avatar/forum.gbfans.com/kingpin/32/188026_2.png) [@kingpin](https://forum.gbfans.com/u/kingpin)\
**Post date:** [June 30, 2014, 12:40am UTC](https://forum.gbfans.com/t/lukes-screen-accurate-gigameter-build-new-pics-pg-2-27-1-15/32640/2 "2014-06-30T00:40:45Z")

</div>

Great progress so far, Luke. Looking forward to seeing how this one comes alone. 🙂

---

<div class="post-metadata">

**Author:** ![jackdoud](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/j/6a8cbe/32.png) [@jackdoud](https://forum.gbfans.com/u/jackdoud)\
**Post date:** [June 30, 2014, 1:13pm UTC](https://forum.gbfans.com/t/lukes-screen-accurate-gigameter-build-new-pics-pg-2-27-1-15/32640/3 "2014-06-30T13:13:46Z")

</div>

Nice start! One of these days I’ll get around to building mine.

---

<div class="post-metadata">

**Author:** ![Tyrael](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/a6a055/32.png) [@Tyrael](https://forum.gbfans.com/u/Tyrael)\
**Post date:** [July 1, 2014, 2:14am UTC](https://forum.gbfans.com/t/lukes-screen-accurate-gigameter-build-new-pics-pg-2-27-1-15/32640/4 "2014-07-01T02:14:05Z")

</div>

Beautiful! I’m going to be using the exact same dome propulsion method and phone cord method for the dome. 😃

---

<div class="post-metadata">

**Author:** ![Bob\_Wobbaz](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/b/d6d6ee/32.png) [@Bob\_Wobbaz](https://forum.gbfans.com/u/Bob_Wobbaz)\
**Post date:** [July 2, 2014, 11:19pm UTC](https://forum.gbfans.com/t/lukes-screen-accurate-gigameter-build-new-pics-pg-2-27-1-15/32640/5 "2014-07-02T23:19:01Z")

</div>

> [@Tyrael](#):
>
> Beautiful! I’m going to be using the exact same dome propulsion method and phone cord method for the dome. 😃

I’ve just seen your thread, amazing how we came to the same idea separately haha. I’ve been scouring what information I can on this prop, there’s so little to work from, hardly any measurements etc. I am definitely eyeballing things and trial and error-ing a lot with this I can tell you! AZ Spidey seems to have managed the dome spinning and the lights without using the phone detangler, I’m utterly in the dark as to how he’s managed, would love to know as my current idea, space would be very tight in the dome, even with me halving the number of LEDs in there :S

---

<div class="post-metadata">

**Author:** ![slimer28](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/s/4af34b/32.png) [@slimer28](https://forum.gbfans.com/u/slimer28)\
**Post date:** [July 3, 2014, 12:35am UTC](https://forum.gbfans.com/t/lukes-screen-accurate-gigameter-build-new-pics-pg-2-27-1-15/32640/6 "2014-07-03T00:35:18Z")

</div>

Awesome job!! I have an AZ spidey casting myself, I worked a little on mine a few years ago but I recently started Work on it again. I’m excited to see this finished and keep up the good Work!

---

<div class="post-metadata">

**Author:** ![Bob\_Wobbaz](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/b/d6d6ee/32.png) [@Bob\_Wobbaz](https://forum.gbfans.com/u/Bob_Wobbaz)\
**Post date:** [July 3, 2014, 11:08am UTC](https://forum.gbfans.com/t/lukes-screen-accurate-gigameter-build-new-pics-pg-2-27-1-15/32640/7 "2014-07-03T11:08:21Z")

</div>

Have had a big rethink regarding the spinning dome and it’s lights and I think I’ve come up with how they did it with the original prop. What triggered the idea was this

Now, it’s my understanding that these have a single light source inside them that shines through the clear windows. The same principle can be applied to the gigameter dome, I think cyland said that acrylic rod was used in his build to make the X on the dome. I was thinking lighting gels could be placed over the back of the rods on the inside to get the red and green colours. Then a single light source would shine through those rods to create the lights on the dome. It may be even possible to butcher one of these disco lights to suit my purpose, I’ve found one ebay for £5 that runs off 2 AA batteries.

---

<div class="post-metadata">

**Author:** ![Tyrael](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/a6a055/32.png) [@Tyrael](https://forum.gbfans.com/u/Tyrael)\
**Post date:** [July 3, 2014, 6:39pm UTC](https://forum.gbfans.com/t/lukes-screen-accurate-gigameter-build-new-pics-pg-2-27-1-15/32640/8 "2014-07-03T18:39:33Z")

</div>

It might be possible, depending on the size of the disco thingy. One of my inlaws has one of those and it’s not exactly a giga-friendly size.

I also have no idea how AZSpidey managed to get his dome working the way it did, with the motor in the center. In any case, it’s more accurate to the original prop to have the cord detangler anyway, at least according to the Cyland Props build page.

---

<div class="post-metadata">

**Author:** ![Bob\_Wobbaz](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/b/d6d6ee/32.png) [@Bob\_Wobbaz](https://forum.gbfans.com/u/Bob_Wobbaz)\
**Post date:** [July 3, 2014, 11:59pm UTC](https://forum.gbfans.com/t/lukes-screen-accurate-gigameter-build-new-pics-pg-2-27-1-15/32640/9 "2014-07-03T23:59:18Z")

</div>

Oh I’m not planning on fitting the disco ball in as is, I plan on gutting it to see how it works. The acrylic rods on cylands must’ve had lighting gels on the inside of the dome to create the red and green lights seen. Although the phone detangler is accurate to the prop built, if I can get the correct effect by a simpler method then I’m going down that route 😉

---

<div class="post-metadata">

**Author:** ![slimer28](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/s/4af34b/32.png) [@slimer28](https://forum.gbfans.com/u/slimer28)\
**Post date:** [July 6, 2014, 5:19am UTC](https://forum.gbfans.com/t/lukes-screen-accurate-gigameter-build-new-pics-pg-2-27-1-15/32640/10 "2014-07-06T05:19:57Z")

</div>

AZ spidey wired up everything from scratch himself so it’s his own custom design. I was a computer tech for and cellphone repair tech for almost 3 years, a buddy and me are designing a crazy light and motor system for the gigameter that will knock the socks off some poor librarian. If you are willing to wait i will share with the community how I did it.

---

<div class="post-metadata">

**Author:** ![Tyrael](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/a6a055/32.png) [@Tyrael](https://forum.gbfans.com/u/Tyrael)\
**Post date:** [July 6, 2014, 5:22am UTC](https://forum.gbfans.com/t/lukes-screen-accurate-gigameter-build-new-pics-pg-2-27-1-15/32640/11 "2014-07-06T05:22:10Z")

</div>

Sounds good, man. The more approaches to this, the better!

---

<div class="post-metadata">

**Author:** ![Bob\_Wobbaz](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/b/d6d6ee/32.png) [@Bob\_Wobbaz](https://forum.gbfans.com/u/Bob_Wobbaz)\
**Post date:** [July 6, 2014, 4:48pm UTC](https://forum.gbfans.com/t/lukes-screen-accurate-gigameter-build-new-pics-pg-2-27-1-15/32640/12 "2014-07-06T16:48:08Z")

</div>

Awesome stuff but I’ve ordered the parts to make my electronics in my own. Have come up with a much simpler solution to the dome problem, I’ll post a picture soon as I can 🙂

---

<div class="post-metadata">

**Author:** ![Bob\_Wobbaz](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/b/d6d6ee/32.png) [@Bob\_Wobbaz](https://forum.gbfans.com/u/Bob_Wobbaz)\
**Post date:** [July 7, 2014, 9:31am UTC](https://forum.gbfans.com/t/lukes-screen-accurate-gigameter-build-new-pics-pg-2-27-1-15/32640/13 "2014-07-07T09:31:39Z")

</div>

Ok, so here’s my doodle of how I figured to get the dome working. I’ve been looking at this thing the wrong way. Rather than seeing the dome lights as individual LEDs, they’re merely just tiny windows for one single light source.

 ![image](https://discdn.gbfans.com/original/3X/5/d/5dcf3f373ab6992715fd3dfa5d75ad39aed17a75.jpeg)

A disc of styrene is cut and made to fit into the body of the main shell. In the center, a hole is cut and the a motor is fixed in place, with the drive rod pointing downwards. Fixed to the drive rod would be a tube to lengthen the drive that would fix to the center of the dome, when the motor is running the dome spins, simple. The lights, well, looking at the dome and seeing how small a place it is, I figured back when the original was built that cramming LEDs into there would be impossible, they must’ve done it some other way.

The lights for the dome are very simple really, it was Cyland’s build that clued me into how it was done.

“The acrylic rods were cut to 1/4” and

arranged in an X pattern on the surface of the

dome. Lights were mounted behind these rods so

that they each had a light."

The acrylic rod segments are basically little windows that let light shine through from one larger light source. Using coloured acetate or lighting gels fixed on the inside of the dome, it would tint the lights to the correct colours as seen on screen. Cyland’s build talks about the phone detangler being used to give power to the lights in the dome but it’s not really necessary. I would guess that lights mounted in the same plate where the motor is mounted, some ultrabright white LEDs, would be more than enough to be seen through the dome.

---

<div class="post-metadata">

**Author:** ![Tyrael](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/a6a055/32.png) [@Tyrael](https://forum.gbfans.com/u/Tyrael)\
**Post date:** [July 7, 2014, 2:23pm UTC](https://forum.gbfans.com/t/lukes-screen-accurate-gigameter-build-new-pics-pg-2-27-1-15/32640/14 "2014-07-07T14:23:21Z")

</div>

The trickiest part of that will be getting the spindle attached to the dead center of the inside of the dome and not at any kind of angle, which will produce a bad wobble at higher spin speeds. I wish you the best of luck!

---

<div class="post-metadata">

**Author:** ![Bob\_Wobbaz](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/b/d6d6ee/32.png) [@Bob\_Wobbaz](https://forum.gbfans.com/u/Bob_Wobbaz)\
**Post date:** [July 7, 2014, 4:42pm UTC](https://forum.gbfans.com/t/lukes-screen-accurate-gigameter-build-new-pics-pg-2-27-1-15/32640/15 "2014-07-07T16:42:34Z")

</div>

I’m thinking of getting small brass or copper tube. My local model shop sells it for steam engine builds, 2mm should be a nice snug fit on the end and be straight as an arrow 🙂 the dome I have has a bump from the mould bang in the center so lining it up should be a piece of cake 🙂

---

<div class="post-metadata">

**Author:** ![halliwax](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/h/47e85d/32.png) [@halliwax](https://forum.gbfans.com/u/halliwax)\
**Post date:** [July 9, 2014, 2:52am UTC](https://forum.gbfans.com/t/lukes-screen-accurate-gigameter-build-new-pics-pg-2-27-1-15/32640/16 "2014-07-09T02:52:09Z")

</div>

> [@slimer28](#):
>
> AZ spidey wired up everything from scratch himself so it’s his own custom design. I was a computer tech for and cellphone repair tech for almost 3 years, a buddy and me are designing a crazy light and motor system for the gigameter that will knock the socks off some poor librarian. If you are willing to wait i will share with the community how I did it.

very very interested to hear and see this! so excited!!

---

<div class="post-metadata">

**Author:** ![halliwax](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/h/47e85d/32.png) [@halliwax](https://forum.gbfans.com/u/halliwax)\
**Post date:** [July 9, 2014, 2:56am UTC](https://forum.gbfans.com/t/lukes-screen-accurate-gigameter-build-new-pics-pg-2-27-1-15/32640/17 "2014-07-09T02:56:14Z")

</div>

![image](https://discdn.gbfans.com/original/3X/8/8/88174388e45b9f0fa4a6702a78ea800badea108e.jpeg)

wicked excited about this! cant wait to see how u rig up the electronics! i agree with you the gigameter is the holy grail to me as well, and my all time favorite prop

i am still hoping AZ brings back another run of meters… i want one bad!

cannot wait to see more progress!!

---

<div class="post-metadata">

**Author:** ![Bob\_Wobbaz](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/b/d6d6ee/32.png) [@Bob\_Wobbaz](https://forum.gbfans.com/u/Bob_Wobbaz)\
**Post date:** [July 9, 2014, 12:50pm UTC](https://forum.gbfans.com/t/lukes-screen-accurate-gigameter-build-new-pics-pg-2-27-1-15/32640/18 "2014-07-09T12:50:47Z")

</div>

Bit of progress with the lights in the dome, experimental mostly. My 2mm acrylic rod arrived along with the lighting gels, I couldn’t resist trying my idea for the lights being fibre optic so I grabbed my LED torch to give it a try, I think it’s going to work perfectly

 ![image](https://discdn.gbfans.com/original/3X/8/b/8bd53c7c397964b049e207a3819c7143fdaf4c09.jpeg)

 ![image](https://discdn.gbfans.com/original/3X/f/4/f4201d0482f216cefdd271b4308c21a5bb4d5180.jpeg)

Cut to length with a cluster of white LEDs shining into the dome, i think this is going to work a treat 😃

---

<div class="post-metadata">

**Author:** ![halliwax](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/h/47e85d/32.png) [@halliwax](https://forum.gbfans.com/u/halliwax)\
**Post date:** [July 10, 2014, 11:31pm UTC](https://forum.gbfans.com/t/lukes-screen-accurate-gigameter-build-new-pics-pg-2-27-1-15/32640/19 "2014-07-10T23:31:07Z")

</div>

> [@Bob Wobbaz](#):
>
> Bit of progress with the lights in the dome, experimental mostly. My 2mm acrylic rod arrived along with the lighting gels, I couldn’t resist trying my idea for the lights being fibre optic so I grabbed my LED torch to give it a try, I think it’s going to work perfectly
> 
> ![image](https://discdn.gbfans.com/original/3X/8/b/8bd53c7c397964b049e207a3819c7143fdaf4c09.jpeg)
> 
> ![image](https://discdn.gbfans.com/original/3X/f/4/f4201d0482f216cefdd271b4308c21a5bb4d5180.jpeg)
> 
> Cut to length with a cluster of white LEDs shining into the dome, i think this is going to work a treat 😃

■■ ■■ ■■! i think its gonna work too!!

---

<div class="post-metadata">

**Author:** ![Bob\_Wobbaz](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/b/d6d6ee/32.png) [@Bob\_Wobbaz](https://forum.gbfans.com/u/Bob_Wobbaz)\
**Post date:** [July 11, 2014, 8:55am UTC](https://forum.gbfans.com/t/lukes-screen-accurate-gigameter-build-new-pics-pg-2-27-1-15/32640/20 "2014-07-11T08:55:22Z")

</div>

More progress! I’ve had a ton of parts arrive so I have pretty much everything i need to finish this build now. Both the inner and outer domes arrived, I managed to source a UK supplier and they really look the business.

I created the extra box on the underside using styrene, smoothed and sanded it so its a all pretty 🙂

 ![image](https://discdn.gbfans.com/original/3X/d/5/d51e27364cab5230136080c546f56b505ffaa608.jpeg)

 ![image](https://discdn.gbfans.com/original/3X/7/a/7a26d40be5f972b25eee92c2ff10844026123770.jpeg)

It’s also a pretty neat fit for my battery clips. I’ve been mulling over how to keep the look of the gigameter without adding extra screw holes and the sort but still be able to open it up to change the batteries. I think what I’ll do is to make this box removable with the batteries hidden inside it.

 ![image](https://discdn.gbfans.com/original/3X/9/0/908d3d5ff61b7dbe53080cd4c736720e460ee402.jpeg)

I’ve also added the rear portion and sanded that smooth into the body. Still need to drill the hole for the rear switch there, but i’ll cross that bridge when I come to it 😉

 ![image](https://discdn.gbfans.com/original/3X/9/f/9f7857deef55c9295a8709b518ccc036a6fc0ec6.jpeg)

Also had the light kit arrive for the microphone ears, will need a little modification, going to swap the 5mm yellow LEDs for 3mm orange. Having said that, the kit is great, lots of different patterns, it remember which pattern it was in when you turn it off and above all, it’s tiny! it’ll take barely any room at all inside the shell.

 ![image](https://discdn.gbfans.com/original/3X/d/a/da19068e098f72d3a5454f7c02cfa474537dac7f.jpeg)

And just because I couldn’t resist, a pic of it all together as it is now 😉

 ![image](https://discdn.gbfans.com/original/3X/0/c/0ccb8fc4d7a12007201a73d107737cdc12d1e3a0.jpeg)

This weekend I think I’ll tackle the spinning dome, have a try at getting that working 🆒

[Next page](https://forum.gbfans.com/t/lukes-screen-accurate-gigameter-build-new-pics-pg-2-27-1-15/32640.md?page=2)
