# MandoMan makes a Blower!

**URL:** <https://forum.gbfans.com/t/mandoman-makes-a-blower/5053>\
**Category:** Slime Blowers\
**Created:** [September 12, 2011, 10:46pm UTC](https://forum.gbfans.com/t/mandoman-makes-a-blower/5053 "2011-09-12T22:46:47Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![MandoMan](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/m/22d042/32.png) [@MandoMan](https://forum.gbfans.com/u/MandoMan)\
**Post date:** [September 12, 2011, 10:46pm UTC](https://forum.gbfans.com/t/mandoman-makes-a-blower/5053/1 "2011-09-12T22:46:47Z")

</div>

I’m going to join the few and proud owners of a [Slime Blower](https://www.gbfans.com/wiki/equipment/slime-blower)! Just got a buttload of parts today from Harbor Freight/Home Depot/Hobby Lobby. Just starting now, but here’s where I’m at.

Main tube is a 8" concrete tube from Home Depot:

While at HD, I found these 8" acrylic dome light covers:

They work almost perfectly for the tube, just need a little bondo to smooth the small ledge:

I’ll be using 4" PVC for the side tanks, with toilet float ■■■■■ for the domes, bondo’d over to smooth them out, thanks to Zack and his build for the idea!

Here’s one of the handles, made from thin aluminum strip bent, with the pvc/wood dowl handle. It’s actually 1.5" aluminum, so a little big, but I might get the right stuff and redo it:

Here are some cheap brass quick connects I got at Harbor Freight, HUGE thanks to ProtonCharger for suggesting them, they’ll work great as a cheap alternative:

Here’s the base for the big ball thing (technical term) that goes below the left tank. It’s a big Christmas ornament I got in a 3-pack for 40% off at Hobby Lobby. Not the exact size, but it’ll get the point across:

And goggle frames from Vince I just got in today! Nothing to do with a slime blower, but they are awesome!

Other things I didn’t get pictures of include an LC-2 alice frame, a bunch of MDF for building the backing board and main tank support, as well as the discharge boxes, a couple hose clamps for the gun, and one of the project boxes.

More pictures of the start of the build will come soon!

---

<div class="post-metadata">

**Author:** ![renny310](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/r/57b2e6/32.png) [@renny310](https://forum.gbfans.com/u/renny310)\
**Post date:** [September 12, 2011, 11:49pm UTC](https://forum.gbfans.com/t/mandoman-makes-a-blower/5053/2 "2011-09-12T23:49:43Z")

</div>

if your interested on putting lighting for the [power cell](https://www.gbfans.com/wiki/equipment/proton-pack/power-cell) i have a wire schematic for that somewhere just let me know plus i have some more stuff to make the actual slime thrower gun (sewer PVC, aluminum flashing) that ur welcome too.

---

<div class="post-metadata">

**Author:** ![MandoMan](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/m/22d042/32.png) [@MandoMan](https://forum.gbfans.com/u/MandoMan)\
**Post date:** [September 13, 2011, 12:02am UTC](https://forum.gbfans.com/t/mandoman-makes-a-blower/5053/3 "2011-09-13T00:02:56Z")

</div>

Yeah man, a schematic would be awesome. I definitely want some lights on it, I have pretty base knowledge of electronics but I’d gladly try to put some together.

---

<div class="post-metadata">

**Author:** ![renny310](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/r/57b2e6/32.png) [@renny310](https://forum.gbfans.com/u/renny310)\
**Post date:** [September 13, 2011, 12:40pm UTC](https://forum.gbfans.com/t/mandoman-makes-a-blower/5053/4 "2011-09-13T12:40:41Z")

</div>

Let me see what I can dig up, the lights are not 100% screen accurate but very close.

---

<div class="post-metadata">

**Author:** ![renny310](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/r/57b2e6/32.png) [@renny310](https://forum.gbfans.com/u/renny310)\
**Post date:** [September 13, 2011, 1:10pm UTC](https://forum.gbfans.com/t/mandoman-makes-a-blower/5053/5 "2011-09-13T13:10:40Z")

</div>

![image](http://www.gbfans.com/images/pb/renny310/CHASER1.png)

I also have the CD4017B if your having problems finding one.

---

<div class="post-metadata">

**Author:** ![c05ta](https://forum.gbfans.com/user_avatar/forum.gbfans.com/c05ta/32/6206_2.png) [@c05ta](https://forum.gbfans.com/u/c05ta)\
**Post date:** [January 4, 2012, 4:12am UTC](https://forum.gbfans.com/t/mandoman-makes-a-blower/5053/6 "2012-01-04T04:12:22Z")

</div>

i would LOVE to see this thing come together

---

<div class="post-metadata">

**Author:** ![MandoMan](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/m/22d042/32.png) [@MandoMan](https://forum.gbfans.com/u/MandoMan)\
**Post date:** [January 9, 2012, 10:52pm UTC](https://forum.gbfans.com/t/mandoman-makes-a-blower/5053/7 "2012-01-09T22:52:23Z")

</div>

Me too. :lol: I’ve been slacking on it, but I’ve also been kinda hesitant about putting it together until I have a light kit for it, so I can figure out how to feed the wires through the tubes so they don’t show.

I’ve got the gun currently in progress, not entirely accurate, but looks pretty good to me.

![image](http://www.gbfans.com/images/pb/Mandoman89/DSCN2018.jpg)

---

<div class="post-metadata">

**Author:** ![DerGrundel](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/d/97f17d/32.png) [@DerGrundel](https://forum.gbfans.com/u/DerGrundel)\
**Post date:** [January 9, 2012, 11:00pm UTC](https://forum.gbfans.com/t/mandoman-makes-a-blower/5053/8 "2012-01-09T23:00:56Z")

</div>

Looking really good so far! Those quick connects you picked up at Harbor Frieght, are they for 3/4" hose? I was just there and it didn’t look like my local store even stocked them in that size, I only saw 1/4."

---

<div class="post-metadata">

**Author:** ![ProtonCharger](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/p/e0b2c6/32.png) [@ProtonCharger](https://forum.gbfans.com/u/ProtonCharger)\
**Post date:** [January 9, 2012, 11:44pm UTC](https://forum.gbfans.com/t/mandoman-makes-a-blower/5053/9 "2012-01-09T23:44:18Z")

</div>

> [@DerGrundel](#):
>
> Looking really good so far! Those quick connects you picked up at Harbor Frieght, are they for 3/4" hose? I was just there and it didn’t look like my local store even stocked them in that size, I only saw 1/4."

not to hijack, they’re not for the pnematic hose, they’re for garden hose located wherever they would keep the garden tools. there’s a couple sets in one pack and they’re less than six bucks.

---

<div class="post-metadata">

**Author:** ![MandoMan](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/m/22d042/32.png) [@MandoMan](https://forum.gbfans.com/u/MandoMan)\
**Post date:** [January 10, 2012, 12:41am UTC](https://forum.gbfans.com/t/mandoman-makes-a-blower/5053/10 "2012-01-10T00:41:52Z")

</div>

^Yep, PC speaks truth! I got them in the fall when all of the garden stuff was on sale.

---

<div class="post-metadata">

**Author:** ![renny310](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/r/57b2e6/32.png) [@renny310](https://forum.gbfans.com/u/renny310)\
**Post date:** [January 10, 2012, 12:42am UTC](https://forum.gbfans.com/t/mandoman-makes-a-blower/5053/11 "2012-01-10T00:42:51Z")

</div>

What did you end up making the cone out of?

---

<div class="post-metadata">

**Author:** ![MandoMan](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/m/22d042/32.png) [@MandoMan](https://forum.gbfans.com/u/MandoMan)\
**Post date:** [January 10, 2012, 12:46am UTC](https://forum.gbfans.com/t/mandoman-makes-a-blower/5053/12 "2012-01-10T00:46:54Z")

</div>

The cone is from the end of an oversized plastic crayon bank from ToysRUs. It fits almost perfectly into 4" thin-walled pvc. I messed up the alignment on the holes just slightly (not noticeable in the picture), but it kinda adds to that “screen-used” wonky look.

---

<div class="post-metadata">

**Author:** ![DerGrundel](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/d/97f17d/32.png) [@DerGrundel](https://forum.gbfans.com/u/DerGrundel)\
**Post date:** [January 10, 2012, 1:06am UTC](https://forum.gbfans.com/t/mandoman-makes-a-blower/5053/13 "2012-01-10T01:06:59Z")

</div>

Thanks ProtonCharger! Man, I was looking completely in the wrong spot! I’ll have to check that section next time I’m there

---

<div class="post-metadata">

**Author:** ![jessejames51](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/j/edb3f5/32.png) [@jessejames51](https://forum.gbfans.com/u/jessejames51)\
**Post date:** [January 24, 2012, 4:56am UTC](https://forum.gbfans.com/t/mandoman-makes-a-blower/5053/14 "2012-01-24T04:56:59Z")

</div>

i check for the quick connects on harbour frieght but couldnt find them…do you have a link or are they not sold there anymore…all i could find were smaller ones. thanks!

---

<div class="post-metadata">

**Author:** ![XxEctOxX](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/x/59ef9b/32.png) [@XxEctOxX](https://forum.gbfans.com/u/XxEctOxX)\
**Post date:** [January 24, 2012, 6:39am UTC](https://forum.gbfans.com/t/mandoman-makes-a-blower/5053/15 "2012-01-24T06:39:27Z")

</div>

what is that red ball made out of?

---

<div class="post-metadata">

**Author:** ![jessejames51](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/j/edb3f5/32.png) [@jessejames51](https://forum.gbfans.com/u/jessejames51)\
**Post date:** [January 24, 2012, 6:42am UTC](https://forum.gbfans.com/t/mandoman-makes-a-blower/5053/16 "2012-01-24T06:42:51Z")

</div>

xxectoxx,

it was mentioned earlier it was made from a christmas ornament

---

<div class="post-metadata">

**Author:** ![DerGrundel](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/d/97f17d/32.png) [@DerGrundel](https://forum.gbfans.com/u/DerGrundel)\
**Post date:** [January 24, 2012, 5:10pm UTC](https://forum.gbfans.com/t/mandoman-makes-a-blower/5053/17 "2012-01-24T17:10:24Z")

</div>

> [@jessejames51](#):
>
> i check for the quick connects on harbour frieght but couldnt find them…do you have a link or are they not sold there anymore…all i could find were smaller ones. thanks!

They’re in the gardening section. I had the same problem because I was looking in the pneumatic connections section. Try gardening next time you’re in Harbour Freight

---

<div class="post-metadata">

**Author:** ![XxEctOxX](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/x/59ef9b/32.png) [@XxEctOxX](https://forum.gbfans.com/u/XxEctOxX)\
**Post date:** [February 13, 2012, 6:29am UTC](https://forum.gbfans.com/t/mandoman-makes-a-blower/5053/18 "2012-02-13T06:29:21Z")

</div>

i know its an ornament, what material is what i was getting at.

---

<div class="post-metadata">

**Author:** ![MandoMan](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/m/22d042/32.png) [@MandoMan](https://forum.gbfans.com/u/MandoMan)\
**Post date:** [February 13, 2012, 6:45am UTC](https://forum.gbfans.com/t/mandoman-makes-a-blower/5053/19 "2012-02-13T06:45:34Z")

</div>

> [@XxEctOxX](#):
>
> i know its an ornament, what material is what i was getting at.

Not sure exactly what material it is, best I can say is a thin flexible plastic, it’s not particularly heavy duty, but it should hold up fine for it’s purpose in this.

And I can say that I’ll be working on this some more soon, since Crix’s new soundboard has made me more excited to get this done!

---

<div class="post-metadata">

**Author:** ![Tyrael](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/a6a055/32.png) [@Tyrael](https://forum.gbfans.com/u/Tyrael)\
**Post date:** [March 6, 2012, 10:20pm UTC](https://forum.gbfans.com/t/mandoman-makes-a-blower/5053/20 "2012-03-06T22:20:46Z")

</div>

Any updates?

[Next page](https://forum.gbfans.com/t/mandoman-makes-a-blower/5053.md?page=2)
